Capillary zone electrophoretic separation of basic proteins and drugs using guaran as a buffer modifier

Summary Guaran, a neutral polysaccharide, has been used as a buffer modifier to improve the separation of basic proteins and drugs. Migration reproductibility, peak shape and efficiency were improved when 0.1% guaran was added to the buffer. The concentration of guaran, ionic strength, and pH of buffer solution were optimized to obtain the optimum separation of proteins. Possible separation efficiencies of 700,000 plates per meter were obtained for test proteins. The relative standard deviation (% RSD) of the migration time of all test proteins was less than 0.5%. Improved separation of β-blockers was also observed when guaran was added to the buffer.     

Morphological and spectroscopic investigation of the behavior of permanent iridium modifier deposited on pyrolytic graphite coated and zirconium treated platforms in electrothermal atomic absorption spectrometry

In order to better characterise a permanent modifier based on iridium deposited on zirconium or tungsten treated platforms of transversely heated graphite atomizer, and to gain additional information about its chemical behavior directed to an eventual further optimization, a series of experiments were carried out, both by surface techniques such as scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS or ESCA) and X-ray fluorescence (XRF) and by electrothermal atomic absorption spectrometry on the iridium release from unmodified and various other modified pyrolytic graphite platforms. Special attention was paid to the influence of the amount of iridium, zirconium carbide coating of the platform surface and the presence of citric acid on the iridium vaporization during pyrolysis and atomization. The processes of iridium losses during pyrolysis and atomization and peak maximum alignment depend on the amount of the iridium deposited on the pyrolytic graphite coated platforms in the presence of nitric acid. A fractional order of release which suggests an atom vaporization from the surface or edges of the iridium islands was estimated. In the presence of citric acid, mass independence and zero order of the atom release were found. The zirconium treatment of the platform results in change of the spatial distribution of iridium and hence its vaporization. Vaporization temperatures as high as 2100°C, and first order of the process of atom generation were obtained. While it was possible to study the iridium atomization from uncoated and zirconium coated surfaces, evidencing a different order for the release process, the same was not possible for the tungsten coated platforms due to an ‘overstabilization’ that brought the iridium atomization temperature out of the working range of the instrument used. The different chemical behavior of tungsten and zirconium was also confirmed by XPS investigations. With tungsten, evidence of both W---C and W---O bonding was found, while zirconium on the contrary shows only Zr---O bonding and no evidence of carbide bonding. The SEM revealed a highly dispersed distribution of spot-like features whose smallest average diameter was of the order of 0.1 μm. The XRF asserted the confinement of iridium in these features and a strict association with zirconium in the case of zirconium treated surfaces. It is worth mentioning that such structure was preserved also after 400 thermal cycles simulating an atomization step at 1900°C despite a quite evident deterioration of the graphite surface, thus confirming the excellent durability of this modifier.     

Chemical vapor generation—electrothermal atomic absorption spectrometry: new perspectives

Volatile species of Ag, Cu, Cd, and Zn were generated at room temperature by the addition of sodium tetrahydroborate (III) to an acidified solution of the analytes. The vapor-phase species were rapidly transported to a pre-heated graphite tube, the surface of which was previously treated with Ir as a permanent chemical modifier. The volatile species were trapped at the Ir treated tube surface, and the further heating of the furnace permits their determination by atomic absorption spectrometry. A univariate approach was used to achieve optimized conditions and derive the figures of merit. The limits of detection based on a 3σ_b criterion were 10 (1); 0.006 (6×10⁻⁴); 28 (2.8) and 1.1 (0.11) ng (μg ml⁻¹) for Ag, Cd, Cu and Zn, respectively. Precision of replicate measurements was typically approximately 10% R.S.D. Using a transfer line as short as possible should minimize losses of analyte during the transport to the graphite furnace. The overall efficiency of the volatile species generation and trapping process estimated for silver was 13%.     

固定化有机改进剂RP－HPLC固定相的研究

通过在ＲＰＨＰＬＣ固定相Ｃ１８表面键合氨基硅烷，引入氨基基团，将有机改进剂固定至硅胶键合相表面，克服了固定相表面硅羟基对含氮有机化合物的不可逆吸附。以最简单的ＣＨ３ＯＨ－Ｈ２Ｏ洗脱体系即能获得含氮有机和的最佳分离，从而可简化分离操作，提高柱寿命，降低分离成本。     

Evaluation of zirconium as a permanent chemical modifier using synchrotron radiation and imaging techniques for lithium determination in sediment slurry samples by ET AAS

In the present paper, lithium was determined in river sediment using slurry sampling and electrothermal atomic absorption spectrometry (ET AAS) after L’vov platform coating with zirconium (as a permanent chemical modifier). The performance of this modifier and its distribution on the L’vov platform after different heating cycles were evaluated using synchrotron radiation X-ray fluorescence (SRXRF) and imaging scanning electron microscopy (SEM) techniques. The analytical conditions for lithium determination in river sediment slurries were also investigated and the best conditions were obtained employing 1300 and 2300 °C for pyrolysis and atomization temperatures, respectively. In addition, 100 mg of sediment samples were prepared using 4.0 mol l⁻¹ HNO₃. The Zr-coating permitted lithium determination with good precision and accuracy after 480 heating cycles using the same platform for slurry samples. The sediment samples were collected from five different points of the Cachoeira river, São Paulo, Brazil. The detection and quantification limits were, respectively, 0.07 and 0.23 μg l⁻¹.     

Direct determination of lead in produced waters from petroleum exploration by electrothermal atomic absorption spectrometry X-ray fluorescence using Ir-W permanent modifier combined with hydrofluoric acid

The present work reports the development of a methodology for the direct determination of lead in high saline waters derived from petroleum exploration employing electrothermal atomic absorption spectrometry with permanent Ir-W and HF as modifiers. These waters, so-called produced waters, have complex composition containing several types of organic and inorganic substances. In order to attain best conditions (highest analytical signal besides lowest background) for the methodology studies about the effect of several variables and the convenient calibration strategy were performed. Also, the efficiency of other modification approaches was evaluated. At best conditions, pyrolysis and atomization temperature were 800 and 2200 °C, respectively, when the modifiers cited above were utilized. Obtained results indicate that, in this kind of sample, lead can be determined by standard addition method or employing external calibration with standard solutions prepared in 0.8 mol l⁻¹ NaCl medium. In order to evaluate the accuracy of the procedure, a recovery test was performed with six spiked samples of produced waters. The detection limit, quantification limit and the relative standard deviation in 0.8 mol l⁻¹ NaCl were also calculated and the values are 1.5 μg l⁻¹, 5.0 μg l⁻¹ and 5.0% (at 10 μg l⁻¹ level), respectively.     

Cadmium Determination in Human Whole Blood by Electrothermal Atomic Absorption Spectrometry with Magnesium Chloride and Sodium Hydroxide as a Combined Chemical Modifier

In this work, we propose a method to determine trace amounts of Cd in human whole blood samples by electrothermal atomic absorption spectrometry (ETAAS) with the combined chemical modifier including magnesium chloride and sodium hydroxide. Prior to the ETAAS analysis, dissolution of the blood samples is accomplished using a HNO₃-HClO₄double closed-vessel microwave digestion technique followed by drying of the dissolved blood samples by means of an infrared lamp. In using this approach, a MgCl₂ chemical modifier is added to the digested samples, then they are injected into the graphite furnace for detecting the Cd level via atomic absorption spectrometer. Besides we used a NaOH chemical modifier, which removed the matrix major elements through prior ashing at 1200 ° C for 30 s, and the Cd is subsequently volatilized at 2200 °C and determined by AAS. However, the proposed method can be employed to determine the of Cd level in whole blood samples by the calibration technique and the standard-additions method. Its validity is confirmed with two certified reference whole blood materials (Seronorm Trace Elements Whole Blood Batch no. 205052 and Batch no. 203056). By using 10 μL injections, a detection limit of 0.052 ng mL^?1 is achieved.     

高分子表面改性剂的分子设计

简述高分子表面改性剂对聚合物进行表面改性的微观模型，讨论了高分子表面改性剂的分子结构、分子量以及加工工艺条件对表面改性效果的影响，提出了高分子表面改剂的分子设计原则。     

Determination of cadmium in biological samples solubilized with tetramethylammonium hydroxide by electrothermal atomic absorption spectrometry, using ruthenium as permanent modifier

The feasibility of Ru as a permanent modifier for the determination of Cd in biological samples treated with tetramethylammonium hydroxide (TMAH) by ET AAS was investigated. The tube treatment with Ru was carried out only once and lasted for about 300 atomization cycles. The pyrolysis and atomization temperatures, 750 °C and 1300 °C, respectively, were chosen from the temperature curves. The sample dissolution procedure was very simple: a sample aliquot was mixed with a small volume of a 25% m/v TMAH solution, the volume was made up to 50 ml and the mixture was kept at 60 °C for 1 h. Six certified biological reference materials were analyzed and the obtained Cd concentrations are within the 95% confidence interval of the certified values, proving the accuracy of the proposed procedure for a variety of biological samples. The calibration curve, with correlation coefficient higher than 0.99, was established for a working range up to10 μg l⁻¹. The precision was good as demonstrated by relative standard deviations below 3%, except for one sample. The limit of detection (3σ) was 0.05 μg l⁻¹ and the characteristic mass was 1.30 pg, obtained in the presence of the Ru modifier.     

Direct determination of aluminium in serum and urine by electrothermal atomic absorption spectrometry using ruthenium as permanent modifier

Ruthenium (Ru), thermally deposited on a integrated platform graphite furnace, was investigated as a permanent modifier for the determination of Aluminum (Al) in blood serum and urine by electrothermal atomic absorption spectrometry (ETAAS). The platform was treated with 500 μg of Ru as previously described. The pyrolysis and atomization temperatures for each material were of 1300 and 2300 °C, for serum sample and of 1000 and 2400 °C, for urine. The characteristic mass were of 31 and 33 pg for Al in serum sample and urine, respectively (recommended of 31 pg for Al in nitric acid 0.2% (v/v)). For this reason, the calibration was made with aqueous solutions for both the samples. Calibration curves presented r of 0.99145 and 0.99991 for serum and urine, respectively. With the optimized temperatures, being analyzed eight spiked blood serum samples, the recovery was between 95.90 and 113.50%. Two certified urines samples were analyzed with good agreement between experimental and reference values. In both the samples the R.S.D. were <5% (n=3). The detection limit (k=3, n=10) was of 0.40 μg of Al per liter for both the samples. The absorption pulses obtained were symmetrical, with very low background and without interferences. The life time of the tube-platform was higher than 600 cycles of atomizations for both the urine and serum samples.