第Ⅱ类三态叠加多模叠加态光场等幂次2m+1次方Y压缩

构造了由多模虚相干态|{iZ_j}>_q、多模虚相干态的相反态|{-iZ_j}>_q和多模真空态|{O_j}>_q这三种不同的量子光场态的线性叠加所组成的第Ⅱ类三态叠加多模叠加态光场|ψ₂⁽³⁾>_q.利用多模压缩态理论,研究了态|ψ₂⁽³⁾>_q的广义非线性等幂次2m+1次方Y压缩特性.结果发现:在压缩次数N=2m+1(m=0,1,2,3,…,…)的条件下,只要各模的初始相位和态间的初始相位差分别满足一定的取值条件,态|ψ₂⁽³⁾>_q就可呈现出周期性变化的、任意奇数次的广义非线性等幂次N次方Y压缩效应.     

Factoring polynomials modulo special primes

We consider the problem of factoring polynomials overGF(p) for those prime numbersp for which all prime factors ofp– 1 are small. We show that if we have a primitivet-th root of unity for every primet dividingp– 1 then factoring polynomials overGF(p) can be done in deterministic polynomial time.Research partially supported by Hungarian National Foundation for Scientific Research, Grant 1812.     

改进型非对称Y分叉内全反射光开关特性分析

提出一种改进型非对称Y分叉内全反射光开关,较详细地分析了结构参量对光开关消光比和损耗的影响,优化设计后开关的消光比可大幅度提高,并给出了一种优化设计的方案.     

催化裂化条件下噻吩与改性Y分子筛的作用机制

以HY、NiY和稀土离子改性的Y分子筛(REY)为研究对象,采用固定床装置评价噻吩模拟油催化裂化性能;运用气相色谱-氢火焰离子发光检测器(GC-FID)、气相色谱-硫化学发光检测器(GC-SCD)和原位红外光谱技术分析产物,关联分子筛的酸性,研究催化裂化条件下噻吩与改性Y分子筛的作用机制。实验结果表明,催化裂化条件下,噻吩与分子筛的作用机制差异主要取决于与B酸或L酸相关的非骨架铝物种或金属离子物种的存在形式。其中,NiY分子筛中,噻吩主要是吸附在与NiOH⁺物种相关的L酸中心,而Ni₄AlO₄³⁺等物种减弱B酸性中心从而降低其裂化性能。对HY来说,噻吩易在与AlO⁺等物种相邻的B酸中心上聚合形成三联噻吩,并发生一定的氢转移和裂化反应;而对REY而言,分子筛中与RE物种相关的L酸位会促进噻吩在与非骨架铝羟基等物种(如Al(OH)₂⁺、Al(OH)²⁺等)相邻的B酸中心形成的二联噻吩发生氢转移和裂化反应。     

Genetic diversity and haplotype structure of 21 Y‐STRs,including nine noncore loci,in South Tunisian Population: Forensic relevance

Y chromosome STRs (Y‐STRs) are being used frequently in forensic laboratories. Previous studies of Y‐STR polymorphisms in different groups of the Tunisian population identified low levels of diversity and discrimination capacity (DC) using various commercial marker sets. This definitely limits the use of such systems for Y‐STRs genotyping in Tunisia. In our investigation on South Tunisia, 200 unrelated males were typed for the 12 conventional Y‐STRs included in the PowerPlex® Y System. Additional set of nine noncore Y‐STRs including DYS446, DYS456, DYS458, DYS388, DYS444, DYS445, DYS449, DYS710, and DYS464 markers were genotyped and evaluated for their potential in improving DC. Allele frequency, gene diversity, haplotype diversity (HD), and DC calculation revealed that DYS464 was the most diverse marker followed by DYS710 and DYS449 markers. The standard panel of 12 Y‐STRs (DC = 80.5%) and the nine markers were combined to obtain DC of 99%. Among the 198 different haplotypes observed, 196 haplotypes were unique (HD = 99.999). Out of the nine noncore set, six Y‐STRs (DYS458, DYS456, DYS449, DYS710, DYS444, and DYS464) had the greatest impact on enhancing DC. Our data provided putative Y‐STRs combination to be used for genetic and forensic applications.     

Host (dealuminated Y zeolite)–guest (zirconium tetraphenylporphyrin) nanocomposite materials. An efficient catalyst in the oximation of aldehydes

In this research, zirconium tetraphenylporphyrin encapsulated into dealuminated Y zeolite (ZrTPP–DAZY) was prepared through a template synthesis method. This heterogeneous catalyst was characterized by XRD, FT-IR, DRS, UV–Vis, EDX and FESEM techniques. The amount of ZrTPP in the nanocage of dealuminated Y zeolite was estimated to be 0.0156 g/g of support. This catalytic system was employed for an efficient oximation of aldehydes under magnetic stirring conditions at room temperature and the corresponding products were obtained in 50–90% yields. This catalytic system also indicated good shape selectivity towards linear aldehydes. ZrTPP–DAZY was reused several times without any significant loss in catalytic activity.     

Improvement in nanocomposite host (nanocavity of dealuminated zeolite Y)-guest (12-molybdophosphoric acid) catalytic activity and its application to the one-pot three-component synthesis of tetrahydrobenzo[b]pyrans

Zeolite Y was dealuminated by chemical methods (with ethylenediaminetetraacetic acid) to modify the zeolite structure for 12-molybdophosphoric acid (MPA) loading. MPA was encapsulated in the nanocavities of modified dealuminated zeolite Y (MDAZY) and characterized by Fourier transform infrared, X-ray diffraction, and atomic absorption spectroscopy. The new catalyst was applied for an efficient chemoselective synthesis of tetrahydrobenzo[b]pyran derivatives, and the corresponding products were obtained in good to excellent yields in very short reaction times. Furthermore, the catalytic activity of this new catalyst in the synthesis of tetrahydrobenzo[b]pyrans was compared with MPA encapsulated in zeolite Y dealuminated by the hydrothermal method. The catalyst (MPA–MDAZY) was recovered and reused several times without loss of its catalytic activity.     

新型Sr_3Y(PO_4)_3∶Ce~(3+),Tb~(3+)绿光荧光粉的制备与发光机理的研究

采用传统的高温固相法合成了一种新型的绿色荧光粉Sr3Y(PO4)3∶Ce3+,Tb3+,利用X射线衍射(XRD)和荧光光谱(PL)对该材料的晶体结构和光学性能进行表征。结果分析表明,制得样品的XRD图谱不含Sr3Y(PO4)3以外的杂峰,稀土掺杂并未改变基质的晶体结构,得到的样品为纯相的磷酸钇锶。从本文实验中明显观察到Sr3Y(PO4)3∶Tb3+的激发光谱和Ce3+的发射光谱在320~390nm有重叠,表明在Sr3Y(PO4)3基质中可存在从Ce3+到Tb3+的能量传递。在紫外光(315nm)激发下该荧光粉发射出了Ce3+的蓝光(320~420nm)和Tb3+的黄绿光(480~500nm)和(530~560nm),当Ce3+的浓度为7%,Tb3+的浓度由1%增大到50%时,通过Ce3+的4f→5d电子跃迁将能量传递到Tb3+,然后发生5 D4→7 Fj电子跃迁,该荧光粉发射光谱可由蓝光逐渐调节为黄绿光。本文绘制了Ce3+,Tb3+的能级和Sr3Y(PO4)3∶Ce3+,Tb3+荧光粉中的能量转移过程示意图,并详细阐述了由Ce3+到Tb3+的能量传递过程。通过对比Ce3+和Tb3+的发光强度以及由Ce3+到Tb3+能量转移效率的相对变化,可以得出,随着掺入的Tb3+浓度不断增加,Tb3+的发射强度(5 D4→7 Fj)和能量转移效率(Ce3+到Tb3+)也在增大,而Ce3+的发射强度却有了明显的下降。当Tb3+的浓度为50%时能量转移效率可高达80%。通过CIE色度图也可以看出,当Tb3+浓度不断增大,样品的色坐标从图中的蓝色区域移动到绿色区域。所以在紫外光激发下,Ce3+和Tb3+共掺Sr3Y(PO4)3可作为一种绿光荧光粉应用在白光LED或LCD背光源上。     

Y2Ti2O7:Tm3+的制备及其发光性能研究

采用溶胶-凝胶法(Sol-gel)制备了不同烧结温度和Tm³⁺掺杂浓度的Y₂Ti₂O₇:xTm (x=0.005,0.01,0.03,0.05)荧光粉,分别采用X射线衍射分析仪(XRD)、透射电子显微镜(TEM)和荧光光谱仪对样品的晶型结构、形貌以及发光性能进行了表征。XRD结果表明,所得到的样品为单一立方相烧绿石结构。样品在361 nm紫外光激发下发射出 蓝光,其峰值波长为456 nm,对应于Tm³⁺的¹D₂→³F₄跃迁。1 000 ℃烧结的Y₂Ti₂O₇: 0.01Tm³⁺样品具有较好的发光性能。样品在456 nm处的相对发光强度随Tm³⁺掺杂浓度的增大先升高后降低,在Tm³⁺摩尔分数为1%时达到最大,即出现了浓度猝灭现象。     

Gd~(3+),Tm~(3+)和Yb~(3+)掺杂的Y_2O_3微晶中Gd~(3+)离子的紫外上转换发光及其增强的研究

采用均相沉淀法制备了Y(OH)3微米颗粒,经1 100℃焙烧后制备出具有上转换发光性质的Yb3+-Tm3+-Gd3+共掺的Y2O3微米晶体,讨论了Yb3+-Tm3+-Gd3+在Y2O3中能量传递过程及壳层对发光强度的影响。980 nm近红外光激发下的上转换光谱表明,在Yb3+-Tm3+-Gd3+共掺Y2O3体系中,核-壳结构大幅提高了Gd3+离子和Tm3+离子的上转换发光强度,尤其是样品在紫外发光部分的增强相比于可见和红外光部分更为明显。同时,通过研究Tm3+和Gd3+在不同波段的发光强度与泵浦功率的关系探讨了氧化物中上转换发光的机制。