颜料体积浓度对水在醇酸涂层中传输行为的影响

水、离子和氧气是导致涂层下金属发生腐蚀的三个重要因素,它们在涂层中的传输过程对其下面金属的腐蚀会产生较大的影响,研究它们在涂层中的传输过程对于弄清涂层下金属发生腐蚀的机制至关重要 .研究表明 [1－ 8], 水在涂层中的传输是一个扩散过程,分起始和饱和两个阶段;在起始阶段,随研究体系和实验条件的不同,水在涂层中的扩散过程遵循不同的规律,可能满足菲克第二扩散定律,也可能会发生较大的偏差 .　　颜料与基料界面间的孔隙是水在涂层中传输的主要通道,调整颜料体积浓度（ PVC）可以改变涂层中这种孔隙的数量和分布,从而…     

杨石先对农药化学学科的重要贡献及其学术思想

杨石先先生一生献身于我国的教育事业与化学学科的发展,在62年中为我国培养了无数高质量的科教人才。他除了长期担任南开大学校长之外, 还创建了我国大学第一个专职研究所,即元素有机化学研究所。他率先开展了我国元素有机化学与农药化学的科学研究,领导了元素有机化学国家重点实验室的建立,是我国元素有机化学和农药化学的奠基人和开拓者。他倡导用有机化学的专业知识,科学和系统地开展农药化学研究,组建队伍获得20项科研成果,发表上百篇科学与论述性论文,为我国开展自主创新农药研究事业作出重要贡献。在农药化学学科的学术思想中,他强调要弄清该学科的交叉性、系统性和内在规律性,倡导要学习国际先进经验,要结合国情自主创新,要为国家经济服务,要对世界农药科技做出贡献。他毕生对人才培养给予了特别的重视,为我国科技事业持续发展作出了重大贡献。     

Effect of annealing on hydrophobic stability of plasma deposited fluoropolymer coatings

Fluorinated amorphous carbon (a-C:F) films e.g. plasma polymerised perfluorocyclobutane have long attracted much consideration due to their low surface energy, hydrophobicity, low refractive index, good electrical and thermal insulation and good thermal stability. Although a-C:F films have many advantages, hydrophobic stability over time in air and water remains a major concern. In this study, the effects of weathering conditions on the hydrophobicity of fluorocarbon films prepared from perfluorocyclobutane precursors were examined using water contact angle measurements. It was found that the high initial hydrophobicity of as-deposited films degrades rapidly in humid conditions. The stability of hydrophobicity can be significantly improved when a suitable treatment such as annealing is employed. The mechanism of weathering was explained with the help of a number of morphological and chemical characterisation techniques such as Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), Fourier Transform Infrared Spectroscopy (FTIR) and X-ray Photoelectron Spectroscopy (XPS). In particular, XPS results demonstrated that a reduction in the overall amount of -CF₃ radical, oxygenation of surface fluorides and the formation of an overlayer all influence the degradation of fluorocarbon in aquatic environment.     

Preparation of coatings from a series of silicone/fluorine‐functionalized polyacrylates via electrophoretic deposition

Silicone/fluorine‐functionalized polyacrylates were synthesized and subsequently used to prepare corrosion‐resistant transparent coatings via electrophoretic deposition. The coated tin plate with the functionalized polyacrylate had a gloss value higher than 95.0 GU and resisted rust after immersion in a 5 wt% NaCl solution for 10 days. In addition, these coatings remained adhered strongly to the tin plates even after they were bent. It is hoped that this work will provide useful experimental data and assist researchers with the design of applicable coatings with desirable properties. Copyright © 2015 John Wiley & Sons, Ltd.     

氮化钛沉积膜的摩擦性能研究

采用等离子电弧沉积法在9Crl8钢表面制备了厚约0．5μm的TiN薄膜，通过显微硬度测试以及纳米压痕和纳米划痕试验，对比考察了9Crl8钢及其表面T|N薄膜的机械和摩擦性能．结果表明，9Crl8钢及其表面T．N沉积膜的纳米硬度分别为8GPa和38GPa，弹性模量分别为250GPa和580GPa，9Crl8、TiN和有机薄膜的摩擦系数分别为0．40、0．12和0．10；TiN沉积膜可显著提高基体钢的承载和耐磨能力．     

PDMS改性环氧树脂/Sm2O3复合涂层的近红外光谱及疏水性研究

以聚二甲基硅氧烷(PDMS)改性环氧树脂(HYSZ)为粘合剂,Sm₂O₃为功能颜料,纳米SiO₂为微纳结构改性剂,制备得到了一种同时具有良好疏水性能和附着力的近红外吸收涂层。系统分析了PDMS和HYSZ质量比、邻苯二甲酸二辛酯(DOP)添加量、总填料添加量、 Sm₂O₃和纳米SiO₂质量比对涂层性能的影响。结果表明：PDMS改性可明显降低涂层的表面能,从而使涂层的疏水性得到明显增强。利用DOP强化涂层韧性和微观搭桥作用可增强涂层整体性,从而可明显提高涂层的附着力和近红外吸收性能。涂层的表面粗糙度可随总填料添加量的增加而明显升高,进而可使涂层表现出更优的疏水性能。当涂层中PDMS和HYSZ质量比、 DOP添加量、总填料添加量、 Sm₂O₃和纳米SiO₂质量比分别为1∶9, 20%, 50%和5.5∶4.5时,涂层同时具有良好的近红外低反射率(59.1%)、疏水性能(水接触角为137°)及附着力...     

“天光”一号MOPA系统光学元件加工与镀膜的进展

本文阐述了在中国原子能科学研究院“天光一号”ＫｒＦ激光核聚变实验装置上，ＭＯＰＡ系统光学元件加工与镀膜研究工作的进展。实验测量结果表明，加工后的基片表面均方根粗糙度对于Ｋ９光学玻璃与熔融石英玻璃来说分别为σｒｍｓ＝１．８±０．５ｎｍ，σｒｍｓ＝２．０±０．４ｎｍ。镀ＨｆＯ２／ＳｉＯ２高反射膜的光学元件的反射率与破坏阈值分别为Ｒ＞９９．５％，Ｅｔｈ＝１．３０～１．３３Ｊ／ｃｍ２。镀Ａｌ２Ｏ３／ＭｇＦ２增透膜的光学元件的透射率与破坏阈值分别为Ｔ＞９９．５％，Ｅｔｈ＝１．３～１．９７Ｊ／ｃｍ２。     

A study on the distribution of adsorbed nanoparticles

We use Monte Carlo simulation to calculate the distributions of particles under adsorption force near planar and cylindrical surfaces,respectively.Both hard sphere interaction and repulsive Yukawa (screened coulomb) interaction are employed in our simulations.We study the influence of the inter-particle potentials.The difference between the MC simulation results and the analytical results of ideal gas model shows that the interaction between particles plays an important role in the density distribution under external fields.Moreover,the 2-dimensional constructions of particles close to the surface are studied and show relations of the interaction between particles.These results may indicate us how to improve the methods of building nanoparticle coatings and nano-scale patterns.