Photocatalytic Activity of Supported Metal Nanoparticles and Single Atoms

Photocatalysis has been known as one of the promising technologies due to its eco-friendly nature. However, the potential application of many photocatalysts is limited owing to their large bandgaps and inefficient use of the solar spectrum. One strategy to overcome this problem is to combine the advantages of heteroatom-containing supports with active metal centers to accurately adjust the structural parameters. Metal nanoparticles (MNPs) and single atom catalysts (SACs) are excellent candidates due to their distinctive coordination environment which enhances photocatalytic activity. Metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and carbon nitride (g-C₃N₄) have shown great potential as catalyst support for SACs and MNPs. The numerous combinations of organic linkers with various heteroatoms and metal ions provide unique structural characteristics to achieve advanced materials. This review describes the recent advancement of the modified MOFs, COFs and g-C₃N₄ with SACs and NPs for enhanced photocatalytic applications with emphasis on environmental remediation.     

Determination of organochlorine pesticides (OCPs) in breast milk from Rio Grande do Sul,Brazil, using a modified QuEChERS method and gas chromatography-negative chemical ionisation-mass spectrometry

ABSTRACT

The food chain is the main source of exposure to humans by organochlorine pesticides (OCPs) due to the bioaccumulation. Breast milk can accumulate OCPs, so this matrix is often used as an environmental bioindicator. The currently available methods for the determination of several OCPs and metabolites in breast milk involve, in general, multi-step sample preparation and quantification techniques with low selectivity, high cost and much time and labour. Thus, a fast and efficient method based on sample preparation using the quick, easy, cheap, effective, rugged and safe (QuEChERS) method combined with gas chromatography coupled to mass spectrometry with negative chemical ionisation (GC-NCI-MS) was developed, validated and applied for determination of 16 OCPs and metabolites in breast milk samples. The extract was cleaned by dispersive solid-phase extraction (d-SPE) using MgSO₄ and C18, evaporated in a Turbovap® system, redissolved and analysed by GC-NCI-MS. The method was validated showing acceptable recoveries (72–118%) and precision (RSD <19%). Method limits of detection (LODs) and quantification (LOQs) ranged from 0.75 to 7.5 ng g^?1 and from 2.5 to 25 ng g^?1 lipid, respectively. The method was successfully applied to 20 samples of breast milk from different regions of the Rio Grande do Sul state, Brazil, of which 75% contained residues below the LOQs.     

Radial sample load distribution under overload conditions: Analytical scale columns

The homogeneity of the sample load across the radial cross section of analytical scale columns was determined when operating under overload conditions. The study was performed using active flow technology columns operating in parallel segmentation mode. The outlet segmentation ratio was varied to enable different volume fractions of mobile phase, and thus sample, to elute from the peripheral and central flow regions of the column. The amount of solute exiting the peripheral and radial central exit ports was determined as a function of the flow segmentation ratio. The experimental data using an analytical scale column with dimensions, 100?×?4.6?mm, indicated that the sample load distribution was essentially uniform as a function of the column radial cross section.     

Determination of trans,trans‐muconic acid in workers' urine through ultra‐performance liquid chromatography coupled to tandem mass spectrometry

A novel method for the biological monitoring of benzene‐exposed workers has been developed through ultra‐performance liquid chromatography coupled to tandem mass spectrometry. The method uses trans,trans‐muconic acid in urine as the benzene‐exposure biomarker. The method was developed using a triple quadrupole mass spectrometer with enough sensitivity to facilitate diluting and injecting the urine samples directly, rather than performing a solid‐phase extraction procedure as is common in the available protocols. Moreover, compared with a conventional high‐pressure liquid chromatography system, the separation power provided by the ultra‐performance liquid chromatography system allows a 10‐fold reduction in run time. The method was adjusted to a dynamic range of between 198.9 and 4916.7 µg/L to cover the biological exposure index of trans,trans‐muconic acid in urine. Also, the method demonstrated intra‐day and inter‐day precision at 98%, and accuracy within an acceptable range of 101 ± 8%. The method has been used to quantify various types of urine samples, such as workers' urine and inter‐laboratory proficiency tests. Depending on the sample, the quantified levels ranged from less than the limit of quantitation to 3836.7 µg/L. No levels exceeding the calibration range were detected in the urine of workers, and the reported concentrations in urine for the proficiency tests were, as expected, based on known values. Moreover, the new method using sample dilution and faster chromatographic run was more effective, facilitating fast communication of results, as needed, to decision‐makers. Copyright © 2012 John Wiley & Sons, Ltd.     

Separation of Hydrocarbon Mixtures in the Microgram Range by Inclusion in a Urea-packed Mini Column

Abstract

The use of classical urea inclusion techniques for the separation of straight chain hydrocarbons from branched and cyclic compounds is satisfactory when applied to mixtures in the milligram to gram ranges, but leads to low separation efficiencies when quantities in the microgram to milligram range are involved. In this study, a modified inclusion technique using an urea-packed milli-bore column and a catalytic eluent is described. Examples of its use for the separation of mixtures of linear and cyclic hydrocarbons from 30μg up to a few milligrams are given. The versatility of this technique for the analyses of low amounts of environmental samples is described, and an application to the hydrocarbon fraction of surface sediment from lake Leman (Switzerland) is presented.     

Isotope Zusammensetzung Der Mineralwässer Der Mongolei

Abstract

The isotopic composition (D, ¹⁸O, ⁸⁷Sr, ³He) of thermal and mineral waters of Mongolia is discussed. The Sr-isotope ratio depends on the rock's contact. Near the Chubsugul-lake ³He-/⁴He-values are high. A certain similarity between the waters of Mongolia and those of East Siberia can be derived from the obtained data.     

The use of relative residues in fitting experimental data: an example from fluid mechanics

A curve fitting model is presented which minimizes the sum of squares of relative residues and expressions for the fit coefficients and their respective errors are derived. The new model is compared to the normal least squares model, using as an example the Reynolds number-drag coefficient data for a sphere. The results show that the best fit was obtained with the new model, indicating it may provide a useful tool for data analysis.     

实验室安全环保意识的调查与分析——以中山大学化学类专业学生为例

A survey about students' laboratory safety and environmental protection consciousness was performed in the freshmen majored in chemistry at Sun Yat-Sen University. Results showed that laboratory safety and environmental protection consciousness of most students' are weak. After analyzing the reasons, we put forward some suggestions. Cultivating students' laboratory safety and environmental protection consciousness should be carried out from several aspects such as emphasizing and regulating from school level, training in laboratory teaching, maintaining good cultural atmosphere of laboratory, as well as providing perfect laboratory safety and environmental protection facilities. We should guide students to actively learn knowledge and skills of laboratory safety and environmental protection in order to develop their good behavior and raise their consciousness.     

State of the art and research development prospects of energy and resource-efficient environmentally safe chemical process systems engineering

In this focus overview, the main types and directions of engineering, methods and techniques of intensification of chemical process systems (CPS) and process optimization of energy- and resource-efficient processes for the representative production of titanium compounds, mining waste processing systems, electrochemical coating technologies, combined technologies for the treatment of industrial effluents and energy-and resource-efficient technologies for cleaning soils from petroleum and chemical pollution products are reviewed. The following issues have been discussed: methods of complex assessment of production energy efficiency and software and information support for automated synthesis of optimal energy-efficient regenerative heat exchange systems using pinch analysis; methods and algorithms for fractal-statistical characteristics analysis of nonstationary gas flows in complex gas pipelines; methods of ecological and economic optimization of production, infrastructure supply chains; methods for assessing and preventing the dangerous environmental impact assessment of chemical pollution; organization and logistics management of business processes engineering for improving the energy efficiency of plants; engineering of problem oriented computer systems, heuristic-computational models and algorithms for intelligent integrated logistics support of the equipment life cycle; engineering developments in the field of digital transformation of energy-efficient CPS and technological production systems; application of methods for optimizing reliability factors optimization, digitalized risk and safety management in the engineering of energy- and resource efficient CPS.     

Minireview: Advances in Germanium Isotope Analysis by Multiple Collector–Inductively Coupled Plasma–Mass Spectrometry

The advent of multiple collector–inductively coupled plasma–mass spectrometry (MC-ICP-MS) has made the high-precision determination of Ge isotopes possible, which leads to the widespread application of Ge isotopes in earth, ocean, and cosmochemistry fields. This paper reviews the history of Ge isotope analysis, chemical dissolution and purification, and mass spectrometry measurements. Concentrated HNO₃ is sufficient to dissolve nearly all types of samples and HF is also involved for Si-rich samples. Low-temperature ashing prior to dissolution is an alternative way to preconcentrate Ge in organic-rich samples. For different matrices, Ge isotopes can be determined by MC-ICP-MS coupled with a traditional nebulizer system or hydride generation system after two-step separation, one step cation/anion-exchange separation, or Mg/Fe co-precipitation protocols. Ion-exchange column methods are suitable for samples with elevated matrix and Ge content such as sulfides, iron oxides, silicate rocks, and coals, whereas Mg or Fe coprecipitation methods are particularly suitable for all kinds of water. Hydride generation systems are improved over traditional nebulizer system due to the smaller sample quantity and fewer matrix-related interferences. Sample-standard bracketing, double spike, and external Ga isotope normalization are used to mass bias correction and yield consistent results. Analytical methods involving Ge-poor samples and Ge isotope analyses based on different Ge species or specific Ge compound in natural environment will be important prospects in the further study. For further applications of Ge isotopes in mineral deposits such as sulfide and iron oxide deposits, sulfides, and iron oxides reference materials should be developed in the future.