卵黄蛋白原的分离测定及其在环境内分泌干扰物质筛选中的应用

环境内分泌干扰物的存在直接威胁野生动物的生存和人类的健康，对其作用机制及筛选方法的研究，已经成为环境科学研究的热点领域。近年来，卵黄蛋白原作为环境内分泌干扰物的“生物标志物”，得到了较深入的研究。本文讨论了卵黄蛋白原的分离测定方法及其在内分泌干扰物筛选中应用的最新进展，为建立更有效的卵黄蛋白分离测定方法及发展新的环境内分泌干扰物筛选技术提供参考。     

铁系高温变换催化剂上水煤气变换反应本征动力学的研究

采用活塞流管式积分反应器,在1.0 MPa压力下,对环境友好铁系无铬NBC-1型高温变换催化剂上变换反应本征动力学数据进行了测试。根据测定得到的数据,对幂函数动力学模型进行了模型参数估计和模型检验,得到了高度显著的动力学回归方程。从动力学方程可以得出:该高温变换催化剂上变换反应活化能比较低,因此其低温活性较好；该催化剂上H2O组分对反应速率的影响比较大；CO2对变换反应速率的抑制作用很大,因此为提高变换反应速率,应当设法减小CO2的不利影响；H2组分对反应速率的影响很小,在实际应用过程中,可以忽略。     

示波极谱法测定环境和生物样中痕量碘

示波极谱法测定环境和生物样中痕量碘@徐泽民$四川大学化学学院!四川成都610064 @李平$四川省地方病防治研究所!四川成都610031 @朱岚$四川省地方病防治研究所!四川成都610031碘;;环境和生物样;;示波极谱法~~     

„Spannungsrißkorrosion” in Polymeren

Zusammenfassung Für den praktischen Einsatz eines Chemiewerkstoffes ist sein Verhalten gegenüber gasförmigen oder flüssigen Medien innerhalb seiner Eigenschaftspalette häufig allein ausschlaggebend. Beispielsweise kann selbst ein hochschlagzäher Thermoplast in Gegenwart einer organischen Flüssigkeit bereits bei geringen mechanischen Beanspruchungen, die weit unterhalb seiner normalen Festigkeitsgrenze liegen, spröde versagen.Mit der vorliegenden Zusammenstellung soll ein Überblick über experimentelle Möglichkeiten zur Charakterisierung des Begriffes Spannungsrißkorrosion in Medien (der besser ersetzt werden sollte durch den Begriff Spannungsrißbildung (environmental stress cracking and crazing = ESC)), sowie über grundlegende Vorstellungen und Voraussagemöglichkeiten gegeben werden. Damit wird ein Beitrag zum Rahmenthema Schädigungsmechanismen in Polymersystemen geliefert, u. a. mit dem Ziel, auf die Notwendigkeit intensiverer Grundlagenuntersuchungen hinzuweisen.

---

Summary Among the different failure mechanisms of a thermoplastic polymer material in practical use the behavior under the influence of gaseous and liquid environments will often be the most decisive factor within its property range. For instance even a high impact material may fail in a brittle manner in the presence of organic liquids at stresses far below the usual breaking level. This paper gives a survey about the experimental possibilities for characterizing the stress corrosion phenomena of plastics in different media. In addition to that the basic theories are shortly commented. The expression corrosion often used in this connection in literature should better be replaced by environmental stress cracking and crazing (ESC) as proposed by Kambour a. o. One main aim of this presentation is to emphasize the need of more intensive true basic research in this field.

     

Molecular scale speciation of first-row transition elements bound to ligneous material by using X-ray absorption spectroscopy

To develop a solid scientific basis for maintaining soil quality and formulating effective remediation strategies, it is critical to determine how environmentally-important trace metals are sequestered in soils at the molecular scale. The speciation of Mn, Fe and Cu in soil organic matter has been determined by synchrotron-based techniques: extended X-ray absorption fine structure (EXAFS) and X-ray absorption near edge structure (XANES). We show the structural similarity between the surface complexes of Mn(II), Fe(III) and Cu(II). These cations are bound to the surface through oxygen atoms. Each one presents a more or less tetragonal-distorted octahedral geometry. The use of X-ray absorption spectroscopy provides a relevant method for determining trace-metal speciation in both natural and contaminated environmental materials.     

Fractional factorial design study of a pressure swing adsorption-solvent vapor recovery process

A two-level fractional factorial study was performed by computer simulation on the periodic state process performance of a pressure swing adsorption-solvent vapor recovery process (PSA-SVR). The goal was to investigate factor (parameter) interaction effects on the process performance, i.e., interaction effects that cannot be ascertained from the conventional one-at-a-time approach. Effects of seven factors, i.e., the purge to feed ratio, pressure level, pressure ratio, heat transfer coefficient, feed concentration, feed volumetric flow rate and bed length to diameter ratio, on the process performance were investigated. The results were judged in terms of the light product purity, heavy product enrichment (and relative enrichment) and recovery, and bed capacity factor. Only the purge to feed ratio, pressure ratio, and feed concentration had significant effects on the benzene vapor enrichment (and relative enrichment); and no two-factor and higher interactions were observed. The light product purity was affected by all seven factors; and the relative importance of the effect of each factor depended on the levels of the other factors, i.e., significant two-factor interaction effects existed. Two-factor interaction effects also existed on the benzene vapor recovery, although the effects of all seven factors and their interactions were relatively small. The bed capacity factor was affected mainly by the purge to feed ratio, the heat transfer coefficient and the feed concentration; two factor and higher order interaction effects were insignificant. Overall, this study demonstrated the utility of fractional factorial design for revealing factor interactions and their effects on the performance of a PSA-SVR process.Nomenclature BCF bed capacity factor, % - b, b ₀ isotherm parameters, m³/(mol K^0.5) - C _pg gas phase heat capacity, kJ/(kg K) - C _ps solid phase heat capacity, kJ/(kg K) - E enrichment - E _I ideal enrichment - E _R relative enrichment - H heat transfer coefficient, kJ/m² s K) - H heat of adsorption, kJ/mol - k number of factors, or mass transfer coefficient, l/s - l number of levels - L bed length, m - LD bed length to diameter ratio - PF purge to feed ratio - P _H adsorption high pressure, kPa - P _L desorption pressure, kPA - PL pressure level, represented byP _I - PR pressure ratio - q amount adsorbed, mol/kg - q ^xx equilibrium amount adsorbed, mol/kg - q ^xx _j equilibrium amount adsorbed at the feed conditions, mol/kg - r _b bed radius, m - R solvent vapor recovery, % or gas constant, m³ (mole K) - T temperature, K - T ₀ ambient temperature, K - t time, s - u interstitial velocity, m/s - VF volumetric feed flow rate, m³ STP/s - YF feed mole fraction - Y _p light product mole fraction - z axial coordinate, m Greek Symbols _g gas phase density, kg/m³ - _s solid phase density, kg/m³ - bed void fraction     

Modelling of ready biodegradability based on combined public and industrial data sources

ABSTRACT

The European Registration, Evaluation, Authorization and Restriction of Chemical Substances Regulation, requires marketed chemicals to be evaluated for Ready Biodegradability (RB), considering in silico prediction as valid alternative to experimental testing. However, currently available models may not be relevant to predict compounds of industrial interest, due to accuracy and applicability domain restriction issues. In this work, we present a new and extended RB dataset (2830 compounds), issued by the merging of several public data sources. It was used to train classification models, which were externally validated and benchmarked against already-existing tools on a set of 316 compounds coming from the industrial context. New models showed good performances in terms of predictive power (Balance Accuracy (BA) = 0.74–0.79) and data coverage (83–91%). The Generative Topographic Mapping approach identified several chemotypes and structural motifs unique to the industrial dataset, highlighting for which chemical classes currently available models may have less reliable predictions. Finally, public and industrial data were merged into global dataset containing 3146 compounds. This is the biggest dataset reported in the literature so far, covering some chemotypes absent in the public data. Thus, predictive model developed on the Global dataset has larger applicability domain than the existing ones.     

Environmental effects of coal combustion

First an introduction is given about the environmental effects of coal combustion. Then the thermoanalytical research in this field is reviewed. Modern topics are the catalytic reduction of NO_x in exhaust-gases and the development of regenerative sulfur capture sorbents for use in fluidized-bed coal combustion.

---

Zusammenfassung Es wird zuerst eine Einführung über die Umwelteinflüsse auf die Kohleverbrennung gegeben. Dann folgt ein überblick über die thermoanalytische Forschung auf diesem Gebiet. Moderne Themen sind dabei die katalytische Reduktion von NO_x in Auspuffgasen und die Entwicklung von Schwefel-Sorptionsmitteln zur Verwendung bei der Flie\bett-Kohleverbrennung.

     

绿色合成--21世纪的有机合成

绿色合成,作为当代有机合成发展的一个重要学科前沿,已成为化学发展的一个方向.从催化剂、绿色溶剂、合成手段、合成方法、计算机辅助绿色合成等方面综述了近年来国内外实现绿色合成的有效途径,并对绿色合成的目标进行了探讨.参考文献35篇.     

磁固相萃取-液相色谱法测定环境水样中有机紫外防晒剂

采用自制的聚离子液体功能化磁性材料有效富集有机紫外防晒剂，并与高效液相色谱-二极管阵列检测器（HPLC-DAD）联用，建立了环境水样中痕量有机紫外防晒剂的检测方法。研究系统考察了解吸溶剂、吸附和解吸时间、样品pH值、离子强度等因素对萃取性能的影响。在最佳萃取条件下，水杨酸辛酯的线性范围为0.5~200.0 μg/L，其他有机紫外防晒剂的线性范围为0.2~200.0 μg/L；6种目标物的检出限（LOD，S/N=3）和定量限（LOQ，S/N=10）分别为0.009~0.13 μg/L和0.031~0.43 μg/L。所建方法成功用于实际环境水样中有机紫外防晒剂的测定，不同加标水平下目标物的加标回收率为71.4%~120%，相对标准偏差均低于10%。研究表明，所建方法具有操作简便、萃取速度快、灵敏度高和环境友好等特点，可用于环境水样中有机紫外防晒剂的检测。