2,6-二氨基-3,5-二硝基吡嗪-1-氧化物的合成及其晶体结构

以三氟乙酸为溶剂和催化剂,2,6-二氨基-3,5-二硝基吡嗪与过氧化氢反应制备了2,6-二氨基-3,5-二硝基吡嗪-1-氧化物(LLM-105),其结构经1H NMR,IR,MS,元素分析和四圆单晶X-射线衍射仪表征。LLM-105属单斜晶系,空间群P21/n,晶胞参数:a=0.571 6(3)nm,b=1.593 5(5)nm,c=0.841 2(5)nm,α=90°,β=100.97(4)°,γ=90°,V=0.7522(6)nm3,Dc=1.908 g.cm-3,Z=4,μ=0.175 mm-1,F(000)=440,μ(MoKα)=1.047 mm-1;R1=0.053 2,wR2=0.137 9。LLM-105存在分子内和分子间氢键。     

Exploring the physical,chemical and thermal characteristics of a new potentially insensitive high explosive RX-55-AE-5

Current work at Lawrence Livermore National Laboratory (LLNL) includes both understanding properties of old explosives and measuring properties of new ones. The necessity to know and understand the properties of energetic materials is driven by the need to improve performance and enhance stability to various stimuli, such as thermal, friction and impact insult. This paper will concentrate on the physical properties of RX-55-AE-5, which is formulated from heterocyclic explosive, 2,6-diamino-3,5-dinitropyrazine-1-oxide, LLM-105, and 2.5% Viton A. Differential scanning calorimetry (DSC) was used to measure a specific heat capacity, C _p, of≈0.950 J g⁻¹ °C⁻¹, and a thermal conductivity, κ, of≈0.475 W m⁻¹ °C⁻¹. The LLNL kinetics modeling code Kinetics05 and the Advanced Kinetics and Technology Solutions (AKTS) code thermokinetics were both used to calculate Arrhenius kinetics for decomposition of LLM-105. Both obtained an activation energy barrier E≈180 kJ mol⁻¹ for mass loss in an open pan. Thermal mechanical analysis, TMA, was used to measure the coefficient of thermal expansion (CTE). The CTE for this formulation was calculated to be ≈61 μm m⁻¹ °C⁻¹. Impact, spark, friction are also reported.     

Sarin and Soman: Structure and Properties

The most stable conformers of sarin (isopropyl methylphosphonoflouridate) and soman (pinacolyl methylphosphonofluoridate) are determined in high-level-correlated calculations with extended Gaussian basis sets. The two molecules are found to have three low-energy conformers each. For both molecules two of the lowest energy conformers have almost the same energies with a very small barrier separating the corresponding minima. The third conformer of sarin is found to lie about 1 kcal/mol above the lowest energy form. For soman the corresponding value is equal to about 4 kcal/mol. The significance of these data for the mechanism of the toxic action of sarin and soman is discussed. According to our investigations sarin and soman are highly similar electronically and differences in their features arise mostly from the size and spatial arrangement of the alkoxy substituent at phosphorus. Also the influence of solvents on the conformations and solvation energies of sarin and soman is investigated.     

分子凝胶中可聚合凝胶因子的聚集态及分形结构研究

利用X射线衍射(XRD)及原子力显微镜(AFM)研究了可聚合凝胶因子4，4′—二 (α-甲基丙烯酰氧基—1，3—亚乙氧基碳基丙酰氨基)二苯甲烷(BMDM)在二苯醚凝 胶中的聚集态及分形结构。研究结果表明，凝胶纤维束是由大量细长的薄带状的单 元纤维有序堆积成的，单元纤维的宽度约为3nm，厚度为0．1—0．2nm；凝胶因子 聚集体则是一种规则的片层结构，具有自相似性和分形特征。利用分形理论中的 Sandbox法计算结果也表明分子凝胶具有分形特征，计算得分形维数D＝1．853。     

Curriculum Vitae of Wei Lin

An existence theory for systems of two non-linear operator equations in Hilbert spaces is presented under non-resonance conditions with respect to two spectra and in terms of matrices convergent to zero. The theory is then applied to elliptic systems.     

1-AminoTriazole Transition-Metal Complexes as Laser-Ignitable and Lead-Free Primary Explosives

This unique complex study describes two isomeric aminotriazoles as auspicious nitrogen-rich ligands for energetic coordination compounds (ECCs) to replace the commonly used highly poisonous and environmentally harmful lead-based primary explosives. The triazoles were obtained by easily scalable and convenient synthetic routes starting solely from commercially available starting materials. 1-Amino-1,2,3-triazole ( 1 , 1-ATRI) and, for the first time, 1-amino-1,2,4-triazole ( 2 , 1A-1,2,4-TRI) were employed as ligands to form highly energetic transition-metal(II) complexes. The desired characteristics could be altered successively by using various nonpoisonous metal(II) centers (Cu²⁺, Mn²⁺, Fe²⁺, and Zn²⁺) and anions (Cl⁻, NO₃⁻, ClO₃⁻, ClO₄⁻, picrate, styphnate, 2,4,6-trinitro-3-hydroxyphenolate, and 2,4,6-trinitro-3,5-dihydroxyphenolate). The 14 synthesized coordination compounds were characterized comprehensively by XRD, IR and UV/Vis spectroscopy, elemental analysis, and differential thermal and thermogravimetric analyses. Ball-drop impact, electrostatic discharge (ESD), and mechanical (impact and friction) sensitivities were determined according to BAM standard methods. In addition to laser ignition experiments, selected ECCs were evaluated in classical secondary explosive initiation tests (detonators filled with pentaerythritol tetranitrate (nitropenta)), which revealed their enormous potential and proved them to be very attractive for future applications in explosives.     

1,1′‐Nitramino‐5,5′‐bitetrazoles

1,1′‐Dinitramino‐5,5′‐bitetrazole and 1,1′‐dinitramino‐5,5′‐azobitetrazole were synthesized for the first time. The neutral compounds are extremely sensitive and powerful explosives. Selected nitrogen‐rich salts were prepared to adjust sensitivity and performance values. The compounds were characterized by low‐temperature X‐ray diffraction, IR and Raman spectroscopy, multinuclear NMR spectroscopy, elemental analysis, and DTA/DSC. Calculated energetic performances using the EXPLO5 code based on calculated (CBS‐4M) heats of formation and X‐ray densities support the high performances of the 1,1′‐dinitramino‐5,5′‐bitetrazoles as energetic materials. The sensitivities toward impact, friction, and electrostatic discharge were also explored. Most of the compounds show sensitivities in the range of primary explosives and should only be handled with great care!     

Car–Parrinello Molecular Dynamics Study of the Thermal Decomposition of Sodium Fulminate

Depending on the metal cation, metal fulminates exhibit a characteristic sensitivity with respect to heat and mechanical stress. In the present paper we study the high‐temperature reactions of bulk sodium fulminate using Car–Parrinello molecular dynamics simulations. We find that the initiating reaction is the formation of the fulminate dimer, while in earlier studies an electron transfer was assumed to be the first reaction step. The initial carbon? carbon bond formation is followed by fast consecutive reactions leading to polymerisation. The resulting species remain charged on the timescale of the simulations.