Naturally derived materials are becoming widely used in the biomedical field. Soy protein has advantages over the various types of natural proteins employed for biomedical applications due to its low price, nonanimal origin, and relatively long storage time and stability. In the current study, novel drug‐eluting soy‐protein films for wound healing applications were developed and studied. The films were prepared using the solvent casting technique. The analgesic drug bupivacaine and two types of wide range antibiotics (gentamicin and clindamycin) were incorporated into the soy‐protein films. The effect of drug incorporation and plasticizers content on the films' mechanical properties, drug release profiles, and cell viability was studied. Drug incorporation had a softening effect of the films, lowering mechanical strength and increasing ductility. Release profiles of bupivacaine and clindamycin exhibited high burst release of 80% to 90% of encapsulated drug within 6 hours, followed by continuous release in a decreasing rate for a period of 2 to 4 days. Gentamicin release was prolonged, probably due to interaction between the gentamicin and the polymer chains. Hybrid soy‐protein/poly (Dl‐lactic‐co‐glycolic acid) (PDLGA) microspheres structure showed potential for long and sustained release of bupivacaine. Films with no drugs and films loaded with gentamicin were found to be noncytotoxic for human fibroblasts, while bupivacaine and clindamycin were found to have some effect on cell growth. In conclusion, our new drug‐loaded soy‐protein films combine good mechanical properties and biocompatibility, with desired drug release profiles, and can therefore be potentially very useful as burn and ulcer dressings. 相似文献
Stretchable self‐healing urethane‐based biomaterials have always been crucial for biomedical applications; however, the strength is the main constraint of utilization of these healable materials. Here, a series of novel, healable, elastomeric, supramolecular polyester urethane nanocomposites of poly(1,8‐octanediol citrate) and hexamethylene diisocyanate reinforced with cellulose nanocrystals (CNCs) are introduced. Nanocomposites with various amounts of CNCs from 10 to 50 wt% are prepared using solvent casting technique followed by the evaluation of their microstructural features, mechanical properties, healability, and biocompatibility. The synthesized nanocomposites indicate significantly higher tensile modulus (approximately 36–500‐fold) in comparison to the supramolecular polymer alone. Upon exposure to heat, the materials can reheal, but nevertheless when the amount of CNC is greater than 10 wt%, the self‐healing ability of nanocomposites is deteriorated. These materials are capable of rebonding ruptured parts and fully restoring their mechanical properties. In vitro cytotoxicity test of the nanocomposites using human dermal fibroblasts confirms their good cytocompatibility. The optimized structure, self‐healing attributes, and noncytotoxicity make these nanocomposites highly promising for tissue engineering and other biomedical applications. 相似文献
Metallo‐supramolecular polymers offer attractive possibilities to combine the properties of polymers with the characteristics offered by the metal–ligand coordination. Here we present for the first time the combination of metal‐bis(terpyridine) complexes and lower critical solution temperature (LCST) polymers that can be switched by addressing either the thermosensitive polymer or the metal complex. We describe a new strategy for the synthesis of poly(N‐isopropylacrylamide) (PNIPAM) end functionalized with a terpyridine moiety, which is further used for the preparation of FeII and ZnII‐bis(terpyridine PNIPAM). The comparison of the LCST behavior of the uncomplexed ligands and their metal complexes that bear different counter ions is included. Furthermore, the switchability of the synthesized FeII system is demonstrated by a decomplexation reaction followed by the characterization of the uncomplexed ligand.
Metal oxide nanoparticles synthesized by the biological method represent the most recent research in nanotechnology. This study reports the rapid and ecofriendly approach for the synthesis of CeO2 nanoparticles mediated using the Abelmoschus esculentus extract. The medicinal plant extract acts as both a reducing and stabilizing agent. The characterization of CeO2 NPs was performed by scanning electron microscopy (SEM), X-ray diffraction (XRD), ultraviolet-visible spectroscopy (UV-Vis), and Fourier transform infrared spectroscopy (FTIR). The in vitro cytotoxicity of green synthesized CeO2 was assessed against cervical cancerous cells (HeLa). The exposure of CeO2 to HeLa cells at 10–125 µg/mL caused a loss in cellular viability against cervical cancerous cells in a dose-dependent manner. The antibacterial activity of the CeO2 was assessed against S. aureus and K. pneumonia. A significant improvement in wound-healing progression was observed when cerium oxide nanoparticles were incorporated into the chitosan hydrogel membrane as a wound dressing. 相似文献
The design of wound dressings with excellent self-healing ability, adequate adhesion, good biocompatibility, and potential antibacterial ability is of great significance for the healing of infected wounds arising from human activities. Herein, a series of multi-functional hydrogel dressings, poly(ionized isocyanoethyl methacrylate-glutamine)/poly(hexamethylene guanidine) (iGx/PHMGy) hydrogels, were obtained through homopolymerization of fully ionized isocyanoethyl methacrylate-glutamine (iIEM-Gln) in the presence of poly(hexamethylene guanidine) (PHMG), in which strong hydrogen bonds were formed among urea groups in the P (iIEM-Gln) chain to form a stable hydrogel network. The prepared iGx/PHMGy hydrogels exhibited adequate self-healing ability and tissue adhesion, which could be firmly adhered to the wound surface and remained intact during application. In addition, the presence of PHMG imparted good antibacterial activity to the hydrogels for the effective promotion of the wound healing in S. aureus infected skin wound on mice. Overall, this multi-functional hydrogel provides a facile and effective strategy for the design of infected wound dressings, and may show great potential in clinical applications. 相似文献
Surgical suture is commonly used in clinic due to its action in accelerating the process of wound healing.However,difficultly handling in minimally invasive surgery and bacteria-induced infection usually limit its use in a wide range of applications.Here,we report a facile scalable strategy to fabricate surgical sutures with shape memory function and antibacterial activity for wound healing.Specifically,a shape memory polyurethane(SMPU) with a transition temperature(T_(trans)) at 41.3℃ was synthesized by adjusting the mole ratio of the hard/soft segment,and then the shape memory surgical sutures containing polyhexamethylene biguanide hydrochloride(PHMB) as a model drug for antibacterial activity were fabricated by a facile scalable one-step wet-spinning approach,in which PHMB was directly dissolved in the coagulation bath that enable its loading into the sutures through the dual diffusion during the phase separation.The prepared sutures were characterized by their morphology,mechanical properties,shape memory,antibacterial activity,as well as biocompatibility before the wound healing capability was tested in a mouse skin suture-wound model.It was demonstrated that the optimized suture is capable of both shape memory function and antibacterial activity,and promote wound healing,suggesting that the facile scalable one-step wet-spinning strategy provides a promising tool to fabricate surgical sutures for wound healing. 相似文献
Modulation of material properties and growth factor application are critical in constructing suitable cell culture environments to induce desired cellular functions. Sulfonated polyrotaxane (PRX) surfaces with immobilized vascular endothelial growth factors (VEGFs) are prepared to improve network formation in vascular endothelial cells. Sulfonated PRXs, whereby sulfonated α‐cyclodextrins (α‐CDs) are threaded onto a linear poly(ethylene glycol) chain capped with bulky groups at both terminals, are coated onto surfaces. The molecular mobility of sulfonated PRX surfaces is modulated by tuning the number of threading α‐CDs. VEGF is immobilized onto surfaces with varying mobility. Low mobility and VEGF‐immobilization reinforce cell proliferation, yes‐associated protein activity, and rhoA, pdgf, ang‐1, and pecam‐1 gene expression. Highly mobile surfaces and soluble VEGF weakly affect these cell responses. Network formation is strongly stimulated in vascular endothelial cells only on low‐mobility VEGF‐immobilized surfaces, suggesting that molecular mobility and VEGF immobilization synergistically control cell function. 相似文献