Computer simulation of a cellular automata model for the immune response in a retrovirus system

Immune response in a retrovirus system is modeled by a network of three binary cell elements to take into account some of the main functional features of T4 cells, T8 cells, and viruses. Two different intercell interactions are introduced, one of which leads to three fixed points while the other yields bistable fixed points oscillating between a healthy state and a sick state in a mean field treatment. Evolution of these cells is studied for quenched and annealed random interactions on a simple cubic lattice with a nearest neighbor interaction using inhomogenous cellular automata. Populations of T4 cells and viral cells oscillate together with damping (with constant amplitude) for annealed (quenched) interaction on increasing the value of mixing probabilityB from zero to a characteristic valueB _ca (B _cq). For higherB, the average number of T4 cells increases while that of the viral infected cells decreases monotonically on increasingB, suggesting a phase transition atB _ca (B _cq).     

折射率色散效应对晶体硅太阳电池反射率的影响

为了分析色散效应对晶体硅太阳电池反射率的影响,在考虑材料折射率色散效应的情况下,运用光学干涉矩阵计算了具有SiO2单层减反射膜和MgF2/ZnS双层减反射膜晶体硅太阳电池的反射率与波长的函数关系,并与实验结果和未考虑色散效应的计算结果进行了对比分析.结果表明：考虑折射率色散效应的计算结果与实验测量数据完全相符,而未考虑折射率色散效应的计算结果与实验测量数据相差较大,最大差值分别为21.5％和16.9％.     

Correlation between microstructure and property of electroless deposited Pt counter electrodes on plastic substrate for dye-sensitized solar cells

Flexible Pt counter electrodes (CEs) were prepared on indium-doped tin oxide coated polyethylene naphthalate (ITO-PEN) substrate by electroless deposition. The correlation between the microstructure and the property of the Pt CEs was investigated. Results showed that isolated Pt nanoparticles were uniformly distributed on the ITO surface at a short deposition duration, and then grew with the deposition duration, leading to the interconnection of adjacent Pt nanoparticles. The interconnection of Pt nanoparticles was beneficial to the electrical property of the Pt CEs, while it was unfavorable to the electrocatalytic property of the Pt CEs. A microstructure model was proposed to explain the correlation between the microstructure and the property of the Pt CEs. In addition, the Pt CEs showed low charge transfer resistance (1.66-0.58 Ω cm²), which was comparable to that (1.16 Ω cm²) of the conventional sputtered Pt CE. The high electrocatalytic property of the electroless deposited Pt CEs makes the assembled DSCs present comparable energy conversion efficiency of the DSCs using sputtered Pt CE.     

The effect of anti-reflection coating of porous silicon on solar cells efficiency

Anti-reflection coatings of solar cells have been fabricated using different techniques. The techniques used include SiO₂ thermal oxidation, ZnO/TiO₂ sputtering deposition and porous silicon prepared by electrochemical etching. Surface morphology and structural properties of solar cells were investigated by using scanning electron microscopy and atomic forces microscopy. Optical reflectance was obtained by using optical reflectometer. I-V characterizations were studied under 80 mW/cm² illumination conditions. Porous silicon was found to be an excellent anti-reflection coating against incident light when it is compared with another anti-reflection coating and exhibited good light-trapping of a wide wavelength spectrum which produced high efficiency solar cells.     

甚高频等离子体增强化学气相沉积制备微晶硅太阳电池的研究

采用甚高频等离子体增强化学气相沉积技术成功地制备了不同硅烷浓度和辉光功率条件下的微晶硅电池.电池的J-V测试结果表明：在实验的硅烷浓度和功率范围内，随硅烷浓度的降低和功率的加大，对应电池的开路电压逐渐变小；硅烷浓度的不同对电池的短路电流密 度有很大的影响，但功率的影响在实验研究的范围内不是很显著.对于微晶硅电池，N层最好 是非晶硅，这是因为一方面可以降低对电流的横向收集效应，另一方面也降低了电池的漏电概率，提高了电池的填充因子. 关键词： 微晶硅太阳电池 甚高频等离子体增强化学气相沉积     

自动显微图像处理系统的研制

为实现病理切片的自动检测研制了一套显微图像处理系统。该系统由三目照相生物显微镜、ＣＣＤ摄像机和带图像处理卡的个人计算机组成。本文介绍显微镜的自动调焦、自动搜索及状态分析判断等系统驱动功能的原理和设计，最后给出该系统临床应用的部分结果     

Preparation of Pt–CeO2/MWNT nano-composites by reverse micellar method for methanol oxidation

We report the preparation of Pt–CeO₂ nanoparticles on the multi-walled carbon nanotubes (MWNTs) by a reverse micellar method. Transmission electron microscopy (TEM) analysis indicated that well-dispersed small Pt–CeO₂ nanoparticles were formed on the MWCNTs. X-ray diffraction (XRD) analysis confirmed the formation of the Pt–CeO₂ nanoparticles on the MWNTs. Cyclic voltammetry (CV) results demonstrated that the Pt–CeO₂/MWNT exhibited a higher methanol oxidation than did the Pt/MWNT catalyst. The CO stripping test showed that CeO₂ can make CO stripped at a lower potential, which is helpful for CO and methanol electro-oxidation.     

Sonocatalytic injury of cancer cells attached on the surface of a nickel–titanium dioxide alloy plate

The present study demonstrates ultrasound-induced cell injury using a nickel–titanium dioxide (Ni–TiO₂) alloy plate as a sonocatalyst and a cell culture surface. Ultrasound irradiation of cell-free Ni–TiO₂ alloy plates with 1 MHz ultrasound at 0.5 W/cm² for 30 s led to an increased generation of hydroxyl (OH) radicals compared to nickel–titanium (Ni–Ti) control alloy plates with and without ultrasound irradiation. When human breast cancer cells (MCF-7 cells) cultured on the Ni–TiO₂ alloy plates were irradiated with 1 MHz ultrasound at 0.5 W/cm² for 30 s and then incubated for 48 h, cell density on the alloy plate was reduced to approximately 50% of the controls on the Ni–Ti alloy plates with and without ultrasound irradiation. These results indicate the injury of MCF-7 cells following sonocatalytic OH radical generation by Ni–TiO₂. Further experiments demonstrated cell shrinkage and chromatin condensation after ultrasound irradiation of MCF-7 cells attached on the Ni–TiO₂ alloy plates, indicating induction of apoptosis.     

Near-infrared quantum cutting in Yb3+ ion doped strontium vanadate

The materials Sr_3−x(VO₄)_2:xYb were successfully synthesized by co-precipitation method varying the concentration of Yb³⁺ ions from 0 to 0.06 mol. It was characterize by powder X-ray powder diffraction (XRD) and surface morphology was studied by scanning electronic microscope (SEM). The photoluminescence (PL) properties were studied by spectrophotometers in near infra red (NIR) and ultra violet visible (UV–VIS) region. The Yb³⁺ ion doped tristrontium vanadate (Sr₃(VO₄)₂) phosphors that can convert a photon of UV region (349 nm) into photons of NIR region (978, 996 and 1026 nm). Hence this phosphor could be used as a quantum cutting (QC) luminescent convertor in front of crystalline silicon solar cell (c-Si) panels to reduce thermalization loss due to spectral mismatch of the solar cells. The theoretical value of quantum efficiency (QE) was calculated from steady time decay measurement and the maximum efficiency approached up to 144.43%. The Sr_(3−x) (VO₄)_2:xYb can be potentiality used for betterment of photovoltaic (PV) technology.     

Light scattering of nanocrystalline TiO2 film used in dye-sensitized solar cells

This paper studies the light scattering and adsorption of nanocrystalline TiO2 porous films used in dye-sensitized solar cells composed of anatase and/or rutile particles by using an optical four-flux radiative transfer model. These light properties are difficult to measure directly on the functioning solar cells and they can not be calculated easily from the first-principle computational or quantitative theoretical evaluations. These simulation results indicate that the light scattering of 1 25 nm TiO2 particles is negligible, but it is effective in the range of 80 and 180 nm. A suitable mixture of small particles （10 nm radius）, which are resulted in a large effective surface, and of larger particles （150 nm radius）, which are effective light scatterers, have the potential to enhance solar absorption significantly. The futile crystals have a larger refractive index and thus the light harvest of the mixtures of such larger rutile and relatively small anatase particles is improved in comparison with that of pure anatase films. The light absorption of the 10μm double-layered films is also examined. A maximal light absorption of double-layered film is gotten when the thickness of the first layer of 10 urn-sized anatase particles is comparable to that of the second larger rutile layer.