Capillary electrochromatography-applicability to the analysis of pesticides and compounds of environmental concern and the theory of electroosmosis

Summary The applicability of capillary electrochromatography to the automated analysis of pesticides and phthalate esters that are of environmental concern was assessed. Reversed phase packing materials were compared. Column to column and run to run reproducibility was established. Peak height with an internal standard gave the best reproducibility. Faster analysis than alternative HPLC methods was demonstrated for a mixture of the insecticide pirimicarb and related pyrimidines. The relationship between the concentration of an analyte in a sample and at the detector was determined by the use of radio-labelled¹⁴C-pirimicarb. The volume fraction of the liquid zone was 0.64. The possibility of electroosmosis through the pores is discussed with reference to the Rice-Whitehead model for electroosmotic flow in a capillary. A new parameter, the effective pore size is used in equations for electroosmosis through porous packings.     

Conductivity studies on some alkali metal iodides in aqueous N,N-dimethylformamide solutions at 298.15K

Summary Conductance measurements for NaI, KI, RbI, and CsI in water/N,N-dimethylformamide mixtures over the whole composition range at 298.15K are reported. The data were analyzed employing theFuoss-Justice equation in terms of limiting molar conductances (_o),Walden products (_o), and association constants (K _A). The results indicate that the salts are weakly associated in the above solvent mixture. Variation in theWalden products with solvent composition are briefly discussed. The results were also compared with values reported previously for some alkali metal chlorides and bromides.

---

Untersuchungen zur elektrischen Leitfähigkeit einiger Alkalimetalliodide in wäßrigen N,N-Dimethylformamidlösungen bei 298.15K

Zusammenfassung Die elektrische Leitfähigkeite von NaI, KI, RbI und CsI wurde in N,N-Dimethylformamid-Wasser-Mischungen verschiedener Zusammensetzung bei 298.15K gemessen. Die erhaltenen Daten wurden analysiert und bezüglich der Grenzäquivalenzleitfähigkeiten (_o), derWalden-Produkte (_o) und der Assoziationskonstanten (K _A) ausgewertet. Die Ergebnisse zeigen, daß diese Salze in den verwendeten Lösungsmittelgemischen nur schwach assoziiert sind. Die Änderungen derWalden-Produkte in Abhängigkeit der Lösungsmittelzusammensetzung werden kurz diskutiert. Abschließend werden die Resultate mit Ergebnissen früherer Messungen, in denen das Verhalten von Alkalimetallchloriden und Alkalimetallbromiden untersucht wurde, verglichen.

     

Synthesis and thermal decomposition of cobalt-containing oligosilanes

Oligo(phenylcobaltcarbonylsilane) was prepared from oligo(phenylsilane) and dicobalt octacarbonyl. The reaction proceeds with elimination of H₂ and CO and insertion of cobalt carbonyl fragments into the silicone backbone of oligosilane. Oligosilane containing cobalt carbonyl groups in side organic substituents was obtained from oligolmethyl(phenylethynyl)Isilane and CO₂(CO)₈. The reaction of 1,2-bis(phenylethyny1)tetramethyldisilane with Co₂(CO)₈ proceeds with the sequential attachment of cobalt carbonyl fragments to ethynyl groups to form disilane derivatives [²-CCPhCo₂(CO)₆] Thermal decomposition of cobalt-containing oligosilanes affords a mixture of paramagnets and ferromagnets.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya. No. 10, pp. 2561–2567, October, 1996.     

Novel Synthesis of Mafenide and Other Amino Sulfonamides by Electrochemical Reduction of Cyano Sulfonamides

Both aliphatic and aromatic amino sulfonamides such as mafenide ( 1a ) were synthesized in good yields (80–86%) by direct electrochemical hydrogenation of the corresponding nitriles in an undivided cell containing a Ni cathode, a Pt anode, and Raney Ni as catalyst (Table 1). The reaction can be performed without external supply of pressurized gas by in situ generation of H₂. Slightly elevated temperatures (45°) and low current densities (10 mA/cm²) are favorable conditions for this type of electrochemical nitrile hydrogenation. Our synthetic protocol does not require high‐pressure equipment or chemical hazards, is environmentally very friendly, and more economical than traditional methods. The concentration of adsorbed H^. radicals on the catalyst surface can be easily controlled by adjusting the electric potential, which may lead to improved product selectivity and, at the same time, reduces the risk of explosion and fire.     

The Electrochemically Initiated Reaction of Sulfide with N,N‐Diethyl‐p‐phenylenediamine in Dimethylformamide. Part II: Implications for Sensing Strategies

The electrochemically initiated reaction of p‐phenylenediamines with sulfide in aqueous media is well documented. We now report the adaptation of this chemistry into nonaqueous media. This is critically appraised as a means of detecting sulfide. The electrochemically initiated reaction of N,N‐diethyl‐p‐phenylenediamine with sulfide is shown at both macro‐ and platinum microdisk electrodes with quantitative detection of sulfide produced by means of the enhanced currents observed upon its addition. The linear detection range for sulfide is dependent on the concentration of N,N‐diethyl‐p‐phenylenediamine present with a linear range from 28–3290 μM and a limit of detection of 22 μM achievable. This represents a large increase compared to that found previously in aqueous media and offers the prospect of more ready applications in high temperature systems.     

Hepatobiliary excretion and brain distribution of caffeine in rats using microdialysis

To investigate the pharmacokinetic mechanism of hepatobiliary excretion and brain distribution of caffeine, this study uses a method based on microdialysis technique and liquid chromatography that allows continuous and concurrent in vivo monitoring of extracellular caffeine in the blood, brain and bile of anesthetized rats following the administration of caffeine (3 or 10 mg/kg, i.v.) through the femoral vein. Dialysates of the blood, brain and bile were directly injected onto the liquid chromatographic system and no further clean-up procedures were required. The study design consisted of two groups of six rats in parallel: the rats of the control group received caffeine (3 or 10 mg/kg, i.v.) alone and those of the cyclosporine treated-group were injected cyclosporine (10 mg/kg, i.v.) 10 min prior to caffeine administration (3 or 10 mg/kg, i.v.). The decline of caffeine in the blood, brain striatum and bile suggested that caffeine had rapid exchange and equilibration between the peripheral compartment and the central nervous system. In addition, the results indicated that caffeine underwent hepatobiliary excretion and was distributed into brain. When cyclosporine was co-administered, the pharmacokinetic parameters were not significantly altered. The results of this study reveal that the pharmacokinetic mechanism of hepatobiliary excretion and brain distribution of caffeine might not relate to P-glycoprotein.     

A new approach for the synthesis of K-free nickel hexacyanoferrate

A Ni, Al hydrotalcite-like compound (Htlc) has been proven an useful host material for an alternative synthesis of a K⁺-free mixed hexacyanoferrate Ni_1.5Fe^III(CN)₆, which is very difficult to obtain in bulk. The first stage of the procedure consists in the intercalation of hexacyanoferrate(III) inside the Htlc structure. The intercalated Htlc has been treated with a NiNO₃ solution. The obtained material has been characterized by XRD, XAS Raman and FT-IR spectroscopy. The voltammetric response of the compound obtained after the complete solubilization of the Htlc host shows a typical fingerprint of nickel hexacyanoferrate material with a very low level of potassium. Elemental analysis confirmed the absence of K⁺ and thus the occurrence of K⁺-free nickel hexacyanoferrate (14% yield).     

Degradation-fragmentation of marine plastic waste and their environmental implications: A critical review

This review critically evaluates the plastic accumulation challenges and their environmental (primarily) and human (secondarily) impacts. It also emphasizes on their degradation and fragmentation phenomena under marine conditions. In addition, it takes into account the leachability of the various chemical substances (additives) embedded in plastic products to improve their polymeric properties and extend their life. Regardless of their effectiveness in enhancing the polymeric function of plastic products, these additives can potentially contaminate air, soil, food, and water. Several findings have shown that, regardless of their types and sizes, plastics can be degraded and/or fragmented under marine conditions. Therefore, the estimation of fragmentation and degradation rates via a reliable developed model is required to better understand the marine environmental status. The main parameter, which is responsible for initiating the fragmentation of plastics, is sunlight/UV radiation. Yet, UV- radiation alone is not enough to fragment some plastic polymer types under marine conditions, additional factors are needed such as mechanical abrasion. It should be also mentioned that most current studies on plastic degradation and fragmentation centered on the primary stages of degradation. Thus, further studies are needed to better understand these phenomena and to identify their fate and environmental effects.     

Schnelle coulometrische Mikrobestimmung einzelner Polythionate

Zusammenfassung Das neue Mikrobestimmungsverfahren beruht auf der coulometrischen Titration von S₂O₃ ^2– nach vorheriger Abbaureaktion der Polythionate mit Sulfit bzw. Cyanid. Es werden 10 ml Probelösung (S₄O₆ ^2–: 5 · 10^–5 bis 1 · 10^–3 M; S₅O₆ ^2–; 2,5 · 10^–5 bis 1· 10^–3 M; S₆O₆ ^2–: 1,66 · 10^–5 bis 1 · 10^–3 M) benötigt. Die Titrationskurve wird von einem Schreiber registriert. Die Reproduzierbarkeit der jeweiligen Einzelbestimmung liegt bei VK _p±0,1 bis ± 1,6%.

---

Rapid coulometric microdetermination of individual polythionates

The method described is based on the coulometric titration of S₂O₃ ^2– after a preceding degradation of the polythionates with sulphite or cyanide. 10 ml of sample solution are required (S₄O₆ ^2–: 5× 10^–5 to 1×10^–3 M; S₅O₆ ^2– : 2.5×10^–5 to 1×10^–3 M; S₆O₆ ^2–: 1.66×10^–5 to 1×10^–3 M). The titration curve is recorded. The reproducibility of a single determination is VK _p±0.1 to ± 1.6%.

     

Practical limitations of capillary gas chromatography

Glass capillary gas chromatography is a high resolution separation method which allows the qualitative and quantitative analysis of even complex mixtures, which may contain many components–also isomeric–in a wide range of volatilities, polarities and concentrations. The principal limitation of gas chromatographic application is given by an insufficient volatility of the species to be separated. Elevated temperatures have to be applied if the application range is to be extended and to achieve steep peak profiles, i.e. low detection limits at high resolution. The use of elevated temperatures is limited, of course, by the temperature stability of both the solvent (stationary liquid and support) and the solutes. The problems of trace analysis for low volatility compounds at high resolution and its limitational parameters regarding sampling, separation and detection are discussed. The applicability of glass capillary columns in this field is influenced by the following parameters: tailing behaviour; irreversible adsorption of polar and decomposition of unstable solutes; thermal stability of stationary liquid (including the support deactivation); separation efficiency and sample capacity (film thickness). Multidimensional gas chromatography using capillary columns coupled either with a packed or another capilllary column for preseparations may be applied with advantage in the analysis of complex mixtures.