利用宇宙线直接测量结果对初级宇宙线能谱参数的调整

由JACEE?,RUNJOB和SOKOL等宇宙线直接测量结果和刚度截断模型,对于10¹⁴—10¹⁶eV能区的初级宇宙线微分能谱参数进行调整.利用调整后的能谱与选取QGSJET模型的CORSIKA程序进行EAS模拟,同HD,PD谱进行对比研究.采用相同的标准对模拟数据与实验数据进行分析.结果表明,调整后的谱和HD谱的模拟结果与甘巴拉山乳胶室实验结果符合较好,而PD谱的模拟结果与实验结果偏离较大.     

Annurca peel extract: from the chemical composition,through the functional activity,to the formulation and characterisation of a topical oil-in-water emulsion

The aim of this study was to produce a hydro-alcoholic safe antioxidant Malus pumila Miller cv Annurca peel extract (APE) useful as functional ingredient in an oil-in-water emulsion. Results showed that APE contains a hydroxycinnamic acid (chlorogenic acid), flavonol glycosides (quercetin derivatives) and a dihydrochalcone, phloridzin (phloretin-2-O-glucoside). The isoquercitrin (quercetin-3-O-glucoside) content was quantified in 0.3% w/w of extract. APE showed a significant and concentration-dependent free-radical scavenging activity correlated to its polyphenols content. No cytotoxic effect was observed in primary human epidermal keratinocyte adults and dermal fibroblast cell lines. The formulative approach led to produce a stable emulsion able to load a high amount of APE, up to 6.0% w/w. The homogenous distribution of APE in the emulsion was clearly demonstrated by fluorescence microscopy analysis. The emulsion resulted able to enhance the in vitro release rate of APE through synthetic membranes with respect to the raw material.     

Production and Characterization of Zirconia (ZrO2) Ceramic Nanofibers by Using Electrospun Poly(Vinyl Alcohol)/Zirconium Acetate Nanofibers as a Precursor

Zirconia (ZrO₂) inorganic ceramic nanofibers were produced using electrospinning of the poly(vinyl alcohol)/zirconium acetate as a precursor followed by calcinating and sintering to decompose the polymer and turn the metal salt (zirconium acetate) into the metal oxide. Characterization of the nanofibers, including polymer thermal decomposition, chemical and crystal structure, phase transformations, and fiber morphology were investigated by simultaneous thermal analysis (STA), thermomechanical analysis (TMA), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and field emission scanning electron microscopy (FESEM). The results showed that the polymer decomposition started at 250°C and zirconia nanofibers with different phases (tetragonal and monoclinic) were obtained by the calcination of the precursor nanofibers at various temperatures between 500°C and 1100°C. The initially crystallized zirconia phase, which formed at 500°C, was tetragonal and with increasing calcination temperature, zirconia nanofibers with increasing amount of monoclinic phase were formed. Consequently, at 1100°C, the tetragonal phase disappeared and was transformed to the monoclinic phase of the zirconia completely. Increasing the calcination temperature caused the fiber average diameter decrease and grain growth took place due to the removal of the polymer and organic groups; neighboring grains sintered to each other and formed fibers with a high aspect ratio. At 1100°C the grains size was about the same as the fiber diameter.     

Brij类表面活性剂与Laponite纳米颗粒的相互作用及其稳定乳液的研究

通过表面张力、Zeta电位和流变学参数的测定, 研究了聚氧乙烯烷基醚类非离子型表面活性剂(Brij 30和Brij 35)在合成锂皂石(Laponite)纳米颗粒表面的吸附及对Laponite水分散体系中颗粒间相互作用和体系粘度的影响. 结果表明, 这类表面活性剂能显著地吸附在Laponite颗粒表面上, 且吸附量随其分子中POE链长短而不同. 这种吸附没有改变Laponite粒子的带电性质, 但一定程度地降低了Laponite颗粒Zeta电位; 吸附也会减弱颗粒间的相互作用, 降低体系的粘度. 实验以Laponite和Brij为乳化剂, 制备了O/W型乳状液. 乳液稳定性变化和乳液粒径分布结果表明, 体系中Brij的浓度较低时, 乳液的性质主要是由Laponite颗粒决定的; 而Brij浓度较高时, 则主要取决于Brij表面活性剂. 高速剪切含Brij的Laponite水分散体系, 剪切后表面张力随时间的变化表明, 剪切作用会使得吸附在Laponite颗粒表面的Brij分子不同程度地解吸下来. 这也意味着乳液制备时, 高速剪切作用也会造成Brij分子自Laponite颗粒表面的脱附, 这可能是非离子表面活性剂与阳离子表面活性剂对负电固体颗粒稳定乳液影响不同的原因.     

Covalent attachment of microbial lipase onto microporous styrene-divinylbenzene copolymer by means of polyglutaraldehyde

A novel method for immobilization of Thermomyces lanuginosus lipase onto polyglutaraldehyde-activated poly(styrene-divinylbenzene) (STY-DVB), which is a hydrophobic microporous support has been successfully developed. The copolymer was prepared by the polymerization of the continuous phase of a high internal phase emulsion (polyHIPE). The concentrated emulsion consists of a mixture of styrene and divinylbenzene containing a suitable surfactant and an initiator as the continuous phase and water as the dispersed phase. Lipase from T. lanuginosus was immobilized covalently with 85% yield on the internal surface of the hydrophobic microporous poly(styrene-divinylbenzene) copolymer and used as a biocatalyst for the transesterification reaction. The immobilized enzyme has been fully active 30 days in storage and retained the activity during the 15 repeated batch reactions. The properties of free and immobilized lipase were studied. The effects of protein concentration, pH, temperature, and time on the immobilization, activity, and stability of the immobilized lipase were also studied. The newly synthesized microporous poly(styrene-divinylbenzene) copolymer constitutes excellent support for lipase. It given rise to high immobilization yield, retains enzymatic activity for 30 days, stable in structure and allows for the immobilization of large amount of protein (11.4mg/g support). Since immobilization is simple yet effective, the newly immobilized lipase could be used in several application including oil hydrolysis, production of modified oils, biodiesel synthesis, and removal of fatty acids from oils.     

Synthesis and kinetic analysis of isothermal and non-isothermal decomposition of ammonium dinitramide prills

Ammonium dinitramide (ADN) prills were prepared by emulsion crystallization and characterized by optical microscopic, thermogravimetric (TG) and differential scanning calorimetric (DSC) techniques. The isothermal and non-isothermal decomposition kinetics of ADN prills were studied by TG. The differential isoconversional method of Friedman (FR) and integral isoconversional method of Vyazovkin were used to investigate the dependence of activation energy (E _a) with conversion (α) and the results were compared with literature data. The dependence of activation energy was also derived from isothermal data. A strong dependence of E _a with α is observed for the ADN prills. All the methods showed an initial increase in E _a up to α=∼0.2 and later decreases over the rest of conversion. The apparent E _a values of FR method are higher than that of Vyazovkin method up to α=∼0.45. The calculated mean E _a values by FR, Vyazovkin and standard isoconversional method for α between 0.05 and 0.95 were 211.0, 203.9 and 156.9 kJ mol⁻¹, respectively.     

Nanofibrous poly(lactic acid)/hydroxyapatite composite scaffolds for guided tissue regeneration

The production of nanofibrous PLA/HA composite scaffolds is described. The morphological, mechanical, surface, and thermal properties of the composites were extensively investigated. The results show that the mixture of PLA and HA formed smooth nanofibers without lumps. The incorporation of HA increased the mechanical strength of the nanofibers and changed the morphology, increasing the mean fiber diameter and pore size. Surface and internal properties confirmed that HA was homogeneously distributed inside the nanofibers and oriented towards their surface. The nanofiber composites allowed the adhesion and proliferation of pre-osteoblasts for up to 3 weeks.     

In situ mineralization of hydroxyapatite on electrospun chitosan-based nanofibrous scaffolds

A biocomposite of hydroxyapatite (HAp) with electrospun nanofibrous scaffolds was prepared by using chitosan/polyvinyl alcohol (CS/PVA) and N-carboxyethyl chitosan/PVA (CECS/PVA) electrospun membranes as organic matrix, and HAp was formed in supersaturated CaCl2 and KH2PO4 solution. The influences of carboxylic acid groups in CECS/PVA fibrous scaffold and polyanionic additive poly(acrylic acid) (PAA) in the incubation solution on the crystal distribution of the HAp were investigated. Field-emission scanning electron microscopy (FE-SEM), energy-dispersive spectroscopy (EDS), wide-angle X-ray diffraction (WAXD), and Fourier transform infrared (FTIR) were used to characterize the morphology and structure of the deposited mineral phase on the scaffolds. It was found that addition of PAA to the mineral solution and use of matrix with carboxylic acid groups promoted mineral growth and distribution of HAp. MTT testing and SEM imaging from mouse fibroblast (L929) cell culture revealed the attachment and growth of mouse fibroblast on the surface of biocomposite scaffold, and that the cell morphology and viability were satisfactory for the composite to be used in bioapplications.     

Electrospun chitosan-coated fibers of poly(L-lactide) and poly(L-lactide)/poly(ethylene glycol): preparation and characterization

Fibrous poly(L-lactide) (PLLA) and bicomponent PLLA/poly(ethylene glycol) mats were prepared by electrospinning and then were coated with chitosan. The presence of chitosan coating was proved by scanning electron microscopy and by fluorescence microscopy. On contact with blood, the chitosan coating led to changes in erythrocyte shape and in their aggregation. The haemostatic activity of the mats increased with increasing chitosan content. Microbiological studies against Staphylococcus aureus revealed that the chitosan coating imparts antibacterial activity to the hybrid mats. The combined haemostatic and antibacterial activities render these novel materials suitable for wound-healing applications.     

Preparation and Investigation of Thermally Annealed Zein–Propolis Electrospun Nanofibers for Biomedical Applications

Zein, a corn-derived protein, has a variety of applications ranging from drug delivery to tissue engineering and wound healing. This work aims to develop a biocompatible scaffold for dermal applications based on thermally annealed electrospun propolis-loaded zein nanofibers. Pristine fibers' biocompatibility is determined in vitro. Next, propolis from Melipona quadrifasciata is added to the fibers at different concentrations (5% to 25%), and the scaffolds are studied. The physicochemical properties of zein/propolis precursor dispersions are evaluated and the results are correlated to the fibers' properties. Due to zein's and propolis' very favorable interactions, which are responsible for the increase in the dispersions surface tension, nanometric size ribbon-like fibers ranging from 420 to 575 nm are obtained. The fiber's hydrophobicity is not dependent on propolis concentration and increases with the annealing procedure. Propolis inhibitory concentration (IC₅₀) is determined as 61.78 µg mL⁻¹. When loaded into fibers, propolis is gradually delivered to cells as Balb/3T3 fibroblasts and are able to adhere, grow, and interact with pristine and propolis-loaded fibers, and cytotoxicity is not observed. Therefore, the zein–propolis nanofibers are considered biocompatible and safe. The results are promising and provide prospects for the development of wound-healing nanofiber patches—one of propolis' main applications.