Bioactive steroidal glycosides from the marine sponge Erylus lendenfeldi

Bioassay-guided fractionation of the methanol extract of Erylus lendenfeldi using engineered strains of budding yeast (Saccharomyces cerevisiae) has resulted in the isolation of the known compound eryloside A (1) and two new compounds, erylosides K (2) and L (3). The structures were established based mainly on 1D and 2D NMR data. The absolute stereochemistry of eryloside A, which had never been fully characterized, was determined using the modified Mosher's method. The absolute stereochemistry of eryloside K was determined by comparison with tetrahydroeryloside A. Compounds 1-3 exhibited selective cytotoxicity against a yeast strain (Δrad50) deficient in double strand break (DSB) repair.     

Reaction Mechanisms of Strontium Ferrites Synthesis

The reactions between strontium and iron nitrates have been studied in an open atmosphere system using three different molar ratios, 1:1 (I), 1:2 (II) and 2:1 (III) at different temperatures as pointed out from the DTA data. The reaction mechanism was discussed based on the chemical composition characterized by means of thermal analysis, X‐ray diffraction patterns, infrared spectra and magnetic susceptibility. It was found that the reaction products depend on both temperature of reaction and the ratio between reactants. The reaction products were found to be composed of a variety of iron compounds that possess different valences: SrFeO_2.86, SrFeO_2.97, SrFe₂O₄, SrFe₁₂O₁₉, Sr₂Fe₂O₅ and Sr₇Fe₁₀O₂₂ in addition to some accessory reaction products namely α‐Fe₂O₃ and FeO(OH).     

5T2-1A1 Spin transition and residual paramagnetism in bis(2,4-bis(2-pyridyl)thiazole)iron(II) complexes: mössbauer effect and magnetism

The ⁵⁷Fe Mössbauer effect in [Fe(pythiaz)₂] (BF₄)₂ (I) and [Fe(pythiaz)₂] (C&O₄)₂ (II) has been studied between 298 and 4.2°K (pythiaz = 2,4-bis(2-pyridyl)thiazole). At 298°K compound I shows a doublet with ΔE_Q(⁵T₂) = 1.29 mm sec^?1 and δ^1S(⁵T₂) = +0.93 mm sec^?1 characteristic of a ⁵T₂ ground state. At 236°K, a second doublet, typical for a ¹A₁ ground state appears. The transition ⁵T₂ å ¹A₁ progresses as the temperature is lowered but levels off below ≈ 120°K. At 4.2°K, 59% of the intensity is due to the ¹A₁ state, and ΔE_Q(¹A₁) = 1.59 mm sec^?1 and δ^1S(¹A₁) = +0.26 mm sec^?1. In an applied magnetic field, V_zz(¹A₁) < 0 has been determined Similar results have been obtained with compound II.Debye-Waller factors f5_T2 and f1_A1. were determined from the Mössbauer spectra under the assumption of Curie-Weiss dependence of the magnetism for the ⁵T₂ and constant μ_eff for the ¹A₁ ground state. The resulting temperature dependence of f1_A1 is highly unusual thus suggesting complicated magnetic behaviour of both ground states in the transition region. Two mechanisms for the nature of the transition are discussed, a “spin-flip” mechanism being the physically more reasonable one. The assumption of a simple Boltzmann distribution (“spin equilibrium”) may be ruled out for the solid but could be encountered in solutions.     

Efficient synthesis of magnetic nanoparticle-Musa acuminata peel composite for the adsorption of anionic dye

The impregnation of magnetite (Mt) nanoparticle (NPs) onto Musa acuminata peel (MApe), to form a novel magnetic combo (MApe-Mt) for the adsorption of anionic bromophenol blue (BPB) was studied. The SEM, EDX, BET, XRD, FTIR and TGA were used to characterize the adsorbents. The FTIR showed that the OH and CO groups were the major sites for BPB uptake onto the adsorbent materials. The average Mt crystalline size on MApe-Mt was 21.13 nm. SEM analysis revealed that Mt NPs were agglomerated on the surface of the MApe biosorbent, with an average Mt diameter of 25.97 nm. After Mt impregnation, a decrease in BET surface area (14.89 to 3.80 m²/g) and an increase in pore diameter (2.25–3.11 nm), pore volume (0.0052–0.01418 cm³/g) and pH point of zero charge (6.4–7.2) was obtained. The presence of Pb(II) ions in solution significantly decreased the uptake of BPB onto both MApe (66.1–43.8%) and MApe-Mt (80.3–59.1%), compared to other competing ions (Zn(II), Cd(II), Ni(II)) in the solution. Isotherm modeling showed that the Freundlich model best fitted the adsorption data (R² > 0.994 and SSE < 0.0013). In addition, maximum monolayer uptake was enhanced from 6.04 to 8.12 mg/g after Mt impregnation. Kinetics were well described by the pseudo-first order and liquid film diffusion models. Thermodynamics revealed a physical, endothermic adsorption of BPB onto the adsorbents, with ΔH^o values of 15.87–16.49 kJ/mol, corroborated by high desorption (over 90%) of BPB from the loaded materials. The viability of the prepared adsorbents was also revealed in its reusability for BPB uptake.     

Three‐dimensional wave impact on a rigid structure using smoothed particle hydrodynamics

Navier–Stokes computations of a wave–structure interaction are performed with the aim of assessing the potential of smoothed particle hydrodynamics to accurately estimate impact loading time history. A three‐dimensional dam‐break flow with a rectangular column located downstream is considered. The net force and impulse exerted on the column is monitored throughout the simulation with the results correlating well with existing experimental data. Initial and boundary conditions and numerical parameters are varied and their effect on the column load investigated. The column load is found to be most sensitive to the choice of boundary treatment. Copyright © 2011 John Wiley & Sons, Ltd.     

Intensity‐based estimation of extreme loss event probability and value at risk

We develop a methodology for the estimation of extreme loss event probability and the value at risk, which takes into account both the magnitudes and the intensity of the extreme losses. Specifically, the extreme loss magnitudes are modeled with a generalized Pareto distribution, whereas their intensity is captured by an autoregressive conditional duration model, a type of self‐exciting point process. This allows for an explicit interaction between the magnitude of the past losses and the intensity of future extreme losses. The intensity is further used in the estimation of extreme loss event probability. The method is illustrated and backtested on 10 assets and compared with the established and baseline methods. The results show that our method outperforms the baseline methods, competes with an established method, and provides additional insight and interpretation into the prediction of extreme loss event probability. Copyright © 2012 John Wiley & Sons, Ltd.     

Weight enumerators of reducible cyclic codes and their dual codes

Let ${\mathbb{F}}_q$ be a finite field and $n$ a positive integer. In this paper, we find a new combinatorial method to determine weight enumerators of reducible cyclic codes and their dual codes of length $n$ over ${\mathbb{F}}_q$, which just generalize results of Zhu et al. (2015); especially, we also give the weight enumerator of a cyclic code, which is viewed as a partial Melas code. Furthermore, weight enumerators obtained in this paper are all in the form of power of a polynomial.     

Octahedral Chiral‐at‐Metal Iridium Catalysts: Versatile Chiral Lewis Acids for Asymmetric Conjugate Additions

Octahedral iridium(III) complexes containing two bidentate cyclometalating 5‐tert‐butyl‐2‐phenylbenzoxazole ( IrO ) or 5‐tert‐butyl‐2‐phenylbenzothiazole ( IrS ) ligands in addition to two labile acetonitrile ligands are demonstrated to constitute a highly versatile class of asymmetric Lewis acid catalysts. These complexes feature the metal center as the exclusive source of chirality and serve as effective asymmetric catalysts (0.5–5.0 mol % catalyst loading) for a variety of reactions with α,β‐unsaturated carbonyl compounds, namely Friedel–Crafts alkylations (94–99 % ee), Michael additions with CH‐acidic compounds (81–97 % ee), and a variety of cycloadditions (92–99 % ee with high d.r.). Mechanistic investigations and crystal structures of an iridium‐coordinated substrates and iridium‐coordinated products are consistent with a mechanistic picture in which the α,β‐unsaturated carbonyl compounds are activated by two‐point binding (bidentate coordination) to the chiral Lewis acid.     

Analysis of risk bounds in partially specified additive factor models

The study of worst case scenarios for risk measures (e.g. the Value at Risk) when the underlying risk vector (or portfolio of risks) is not completely specified is a central topic in the literature on robust risk measurement. In this paper we discuss partially specified factor models as introduced in Bernard et al. (2017) in more detail for the class of additive factor models which admit more explicit results. These results allow to describe in more detail the reduction of risk bounds obtainable by this method in dependence on the degree of positive resp. negative dependence induced by the systematic risk factors. The insight may help in applications of this reduction method to get a better qualitative impression on the range of influence of the partially specified factor structure.     

Synthesis and Characterization of Novel Biodegradable Di‐ and Tri‐Block Copolymers Based on Ethylene Carbonate Polymer as Hydrophobic Segment

Synthesis of novel amphiphilic biodegradable block copolymers based on ethylene carbonate is reported in this study. Polyethylene glycol monomethyl ether (MeO‐PEO) and polyethylene glycol (PEG) of varying molar masses are used as macro‐initiator for ring‐opening polymerization of ethylene carbonate in the presence of sodium stannate trihydrate as a heterogeneous transesterification catalyst. Earlier elution of block copolymer from macro‐initiator in size exclusion chromatography (SEC) indicated the successful synthesis of the block copolymers. Ratios of both types of blocks are varied systematically. Liquid chromatography at critical conditions is used for the analysis of the non‐critical individual blocks, and if there are any critical segments that are not attached to the non‐critical block. To the best of our knowledge, this is the first report on the synthesis of ethylene carbonate‐based amphiphilic block copolymers. Chromatographic critical conditions of the ethylene carbonate polymer are also reported for the first time. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1887–1893