Rapid and easy quantification of elemental sulphur in aqueous samples from biological reactors: the turbidimetric method revisited

Recent developments in wastewater treatment have led to a renewed interest to obtain elemental sulphur (S°) as a by-product from bioreactors. However, practical studies are limited by the gap of adequate analytical techniques for its determination. This paper provides a statistical study and matrix effect evaluation of an adapted spectrophotometric method for routine S° analyses in aqueous samples, based on a methodology previously described by Hart (1961). Four complex matrices were tested: domestic sewage and effluent samples from three different bioreactors. Tested performance criteria included linearity, matrix effect, limit of detection and quantification and S° recovery. Results were linear (R² = 0.99994) in the studied range (5 to 100 mg S° L^?1) and no matrix effect was observed. The accuracy was based on recovery values that varied from 100% to 106%. The colloidal S° separation and extraction protocol was also considered suitable for aqueous samples, reaching more than 99.0% of S° recovery.     

Photooxidation Of Arsenobetaine And Arsenocholine To Generate Arsines Previous To Icp-Oes Measurement

Abstract

A photolytic method, which uses UV irradiation (254 nm) and K₂S₂O₈ in alkaline media has been optimized for the speciation of arsenite, arsenate, monomethylarsonic and dimethylarsinic acid, arsenobetaine and arsenocholine. Under these conditions it is possible to obtain not only simple species from arsenobetaine and arsenocholine with good yields, but also to establish the optimum conditions to carry out the process on-line with HG-ICP/OES for the determination of these species.

The products obtained in the photolytic reaction are introduced into the reduction chamber to form arsines. According to the results obtained from the ICP measurements, the recoveries obtained are about 100% and the procedure has a good reproducibility.     

地球化学模拟在高放废物地质处置中的应用与发展

随着核能事业的发展,高放废物的处理和处置问题日益突出.其中,研究高放废物在环境介质中的吸附、扩散和迁移行为是获取放射性核素对周围环境和人群健康影响的基础参数的最重要和最直接的途径.近年来,人们利用已有的实验数据及核素的基础热力学和动力学数据,附以相应的数学模型,建立了一些地球化学模拟软件,用于分析核素在地质介质中可能发生的连续性和长期性变化.目前,国内外常用的地球化学模拟软件有十多种.本文从热力学平衡计算原理、种态分布计算方法和表面配位模型假设等几个方面对地球化学模拟软件进行了简要介绍,对近年来地球化学模拟软件在核素种态分布计算和表面配位模型模拟两方面的应用进行了举例分析,并以Ca-U-CO3配合物为例,说明完备的热力学数据对地球化学模拟软件发展的重要性,以期促进我国地球化学模型的应用和发展.     

Power of isotopic fine structure for unambiguous determination of metabolite elemental compositions: In silico evaluation and metabolomic application

In mass spectrometry (MS)-based metabolomics studies, reference-free identification of metabolites is still a challenging issue. Previously, we demonstrated that the elemental composition (EC) of metabolites could be unambiguously determined using isotopic fine structure, observed by ultrahigh resolution MS, which provided the relative isotopic abundance (RIA) of ¹³C, ¹⁵N, ¹⁸O, and ³⁴S. Herein, we evaluated the efficacy of the RIA for determining ECs based on the MS peaks of 20,258 known metabolites. The metabolites were simulated with a ≤25% error in the isotopic peak area to investigate how the error size effect affected the rate of unambiguous determination of the ECs. The simulation indicated that, in combination with reported constraint rules, the RIA led to unambiguous determination of the ECs for more than 90% of the tested metabolites. It was noteworthy that, in positive ion mode, the process could distinguish alkali metal-adduct ions ([M + Na]⁺ and [M + K]⁺). However, a significant degradation of the EC determination performance was observed when the method was applied to real metabolomic data (mouse liver extracts analyzed by infusion ESI), because of the influence of noise and bias on the RIA. To achieve ideal performance, as indicated in the simulation, we developed an additional method to compensate for bias on the measured ion intensities. The method improved the performance of the calculation, permitting determination of ECs for 72% of the observed peaks. The proposed method is considered a useful starting point for high-throughput identification of metabolites in metabolomic research.     

Coupling nanoliter high‐performance liquid chromatography to inductively coupled plasma mass spectrometry for arsenic speciation

Nanoliter high‐performance liquid chromatography shows low consumption of solvents and samples, offering one of the best choices for arsenic speciation in precious samples in combination with inuctively coupled plasma mass spectrometry. A systematic investigation on coupling nanoliter high‐performance liquid chromatography to inductively coupled plasma mass spectrometry from instrument design to injected sample volume and mobile phase was performed in this study. Nanoflow mobile phase was delivered by flow splitting using a conventional high‐pressure pump with reuse of mobile phase waste. Dead volume was minimized to 60 nL for the sheathless interface based on the previously developed nanonebulizer. Capillary columns for nanoliter high‐performance liquid chromatography were found to be sensitive to sample loading volume. An apparent difference was also found between the mobile phases for nanoliter and conventional high‐performance liquid chromatography. Baseline separation of arsenite, arsenate, monomethylarsenic, and dimethylarsenic was achieved within 11 min on a 15 cm C₁₈ capillary column and within 12 min on a 25 cm strong anion exchange column. Detection limits of 0.9–1.8 μg/L were obtained with precisions variable in the range of 1.6–4.2%. A good agreement between determined and certified values of a certified reference material of human urine (GBW 09115) validated its accuracy along with good recoveries (87–102%).     

Synthesis and characterization of dimeric μ-oxidovanadium complexes as the functional model of vanadium bromoperoxidase

Two vanadium (IV) complexes [V^IVO(Haeae-sal)(MeOH)]⁺ ( 1 ) and [V^IVO(Haeae-hyap)(MeOH)]⁺ ( 2 ) were prepared by reacting [VO(acac)₂] with ligands [H₂aeae-sal] ( I ) and [H₂aeae-hyap] ( II ) respectively. Condensation of 2-(2-aminoethylamino)ethanol with salicylaldehyde and 2-hydroxyacetophenone produces the ligands ( I ) and ( II ) respectively. Both vanadium complexes 1 and 2 are sensitive towards aerial oxygen in solution and rapidly convert into vanadium(V) dioxido species. Vanadium(V) dioxido species crystalizes as the dimeric form in the solid-state. Single-crystal XRD analysis suggests octahedral geometry around each vanadium center in the solid-state. To access the benefits of heterogeneous catalysis, vanadium(V) dioxido complexes were anchored into the polymeric chain of chloromethylated polystyrene. All the synthesized neat and supported vanadium complexes have been studied by a number of techniques to confirm their structural and functional properties. Bromoperoxidase activity of the synthesized vanadium(V) dioxido complexes 3 and 4 was examined by carrying out oxidative bromination of salicylaldehyde and oxidation of thioanisole. In the presence of hydrogen peroxide, 3 shows 94.4% conversion ( TOF value of 2.739 × 10² h⁻¹) and 4 exhibits 79.0% conversion (TOF value of 2.403 × 10² h⁻¹) for the oxidative bromination of salicylaldehyde where 5-bromosalicylaldehyde appears as the major product. Catalysts 3 and 4 also efficiently catalyze the oxidation of thioanisole in the presence of hydrogen peroxide where sulfoxide is observed as the major product. Covalent attachment of neat catalysts 3 and 4 into the polymer chain enhances substrate conversion (%) and their catalytic efficiency increases many folds, both in the oxidative bromination and oxidation of thioether. Polymer supported catalysts 5 displayed 98.8% conversion with a TOF value of 1.127 × 10⁴ h⁻¹ whereas catalyst 6 showed 95.7% conversion with a TOF value of 4.675 × 10³ h⁻¹ for the oxidative bromination of salicylaldehyde. These TOF values are the highest among the supported vanadium catalysts available in the literature for the oxidative bromination of salicylaldehyde.     

High efficiency of Mn–Ce‐modified TiO2 catalysts for the low‐temperature oxidation of Hg0 under a reducing atmosphere

Manganese‐ and cerium oxide‐modified titania catalysts were prepared by the deposition precipitation for the removal of elemental mercury (Hg⁰) from simulated yellow phosphorus off‐gas at low temperature. In addition, these catalysts were characterized by X‐ray diffraction, Brunauer–Emmett–Teller measurements, X‐ray photoelectron spectroscopy and field‐emission scanning electron microscope to determine the surface morphology of the obtained compounds and explore their formation mechanism. The results revealed that a Mn–Ce loading and reaction temperature of 10% and 150 °C, respectively, as well as a Mn/Ce molar ratio of 2:1, led to an optimal efficiency for the oxidation of elemental mercury. Furthermore, the effects of flue gas components were investigated. The presence of O₂ clearly promoted the oxidation of Hg⁰. A CO atmosphere did not affect the Hg⁰ oxidation, when compared with N₂, whereas the presence of H₂S and water vapor inhibited the oxidation process. Furthermore, the X‐ray photoelectron spectroscopy spectra of Hg 4f revealed that the elemental mercury adsorbed by the catalyst is present as HgO. Finally, the Hg⁰ catalytic oxidation mechanism was discussed on the basis of the experimental results and characterization analysis.     

Inorganic mercury and methylmercury determination in polluted waters by HPLC coupled to cold vapour atomic fluorescence spectroscopy

A systematic study of Hg²⁺ and CH₃Hg⁺ (MeHg⁺) speciation using hyphenated techniques, was performed for high-performance liquid chromatography coupled to on-line UV irradiation and cold-vapour atomic fluorescence spectroscopy (HPLC-UV-CV-AFS). First, a comparative study of the behaviour of three mobile phase compositions (using tetrabutylammonium bromide (TBAB), L-cysteine and ammonium pyrrolidinedithiocarbamate (APDC)) is presented. The separation and detection system was optimised by considering factors that modify fluorescence signal and the separation such as, the addition of different percentages of an organic modifier (methanol (MeOH) and acetonitrile (ACN)) to the mobile phase, the type of reducing agent used (SnCl₂ and NaBH₄) and the potential memory effects of the material of which the injection system is made (stainless steel, PEEK). The mobile phase selected for its sensitivity was a mixture 80?:?20 MeOH?:?0.0015?mol?l^–1 APDC and 0.01?mol?l^–1 NH₄CH₃COO (pH 5.5). The detection and quantification limits were close to 1.5 and 5?µg?l^?1 for both species (as Hg), respectively. Recoveries obtained using fortified water samples of distinct origin (soft mineral, tap, river, seawater, and wastewater), ranged from 90 to 115% for concentrations about 2 and 20 times over quantification limits. Good repeatability was obtained (about 5%) independently of the concentrations, with reproducibility values about 20% at low concentrations and 5–10% at higher concentrations. Our proposed method proved to be straightforward for use by environmental laboratories for routine Hg²⁺ and MeHg⁺ determinations in polluted water samples.     

XANES speciation of mercury in three mining districts – Almadén,Asturias (Spain), Idria (Slovenia)

The mobility, bioavailability and toxicity of mercury in the environment strongly depend on the chemical species in which it is present in soil, sediments, water or air. In mining districts, differences in mobility and bioavailability of mercury mainly arise from the different type of mineralization and ore processing. In this work, synchrotron‐based X‐ray absorption near‐edge spectroscopy (XANES) has been taken advantage of to study the speciation of mercury in geological samples from three of the largest European mercury mining districts: Almadén (Spain), Idria (Slovenia) and Asturias (Spain). XANES has been complemented with a single extraction protocol for the determination of Hg mobility. Ore, calcines, dump material, soil, sediment and suspended particles from the three sites have been considered in the study. In the three sites, rather insoluble sulfide compounds (cinnabar and metacinnabar) were found to predominate. Minor amounts of more soluble mercury compounds (chlorides and sulfates) were also identified in some samples. Single extraction procedures have put forward a strong dependence of the mobility with the concentration of chlorides and sulfates. Differences in efficiency of roasting furnaces from the three sites have been found.     

Study of the circumstance influence on the elemental distribution in ancient animal bone using μ-XRF

Elemental analysis of archaeological bone plays an important role in the study of the dietary habits of ancient animals. The elemental characteristic of diagenetic skeletons depends on the surrounding circum-stance. The study of environmental influence on the elemental concentration of ancient bone is significant. In this paper, the diagenetic influence on archaeological skeletons is analyzed by microbeam X-ray fluorescence (μ-XRF). The results show that the enamel is an excellent barrier to the diagenesis and the element Sr in bone isn’t susceptible to contamination from the buried environment.