Vapor pressure,speciation, and chemical activities in highly concentrated sodium borate solutions at 277 and 317°C

The system H₂O-B₂O₃-Na₂O has been studied experimentally at 277 and 317°C. The activities of water and boric acid have been determined at mole ratios Na/B from 0 to 1.5, and total dissolved solids 3 to 80 weight percent. The activity of boric acid has been fitted to within experimental error using a speciation model with eight complex species. This model is consistent with the model previously published by Mesmer et al. The electrolyte properties of the liquid are modeled using the Pitzer-Simonson model of very concentrated electrolyte solutions. The calculated values of water activity agree with experiment, and the activity of NaOH and pOH have also been calculated. The potassium borate system also was briefly studied at 317°C, and is adequately described by a model with five complex species. The potassium borate liquid is more alkaline at K/B= 1 than a sodium borate liquid at the same mole ratio, but pOH in the two systems is the same at lower mole ratios.     

偏最小二乘光度法同时测定铜和铁的研究及应用

７－（１－苯偶氮）－８－羟基喹啉－５－磺酸钠在ＰＨ＝４．７５ＨＡｃ－ＮａＡｃ缓冲溶液中能与Ｃｕ（Ⅱ）和ＦＥ（Ⅲ）形成稳定的络合物，本文研究了Ｃｕ（Ⅱ）－ＰＡＨＱＳ、Ｆｅ（Ⅲ）－ＰＡＨＱＳ体系的显色条件，以偏最小二乘法处理两者重叠吸收峰，建立了光度法同时测定铜和铁的方法。     

色素类胆结石难溶原因的分析

本文采用不同的溶剂对溶解前后的胆色素类结石进行了超微结构的观测.并用能谱仪对溶解前后的胆色素类结石进行了主要元素的检测,同时对特征色素类结石进行了有机元素分析.通过比较溶解前后超微结构和各种元素含量的变化,认为胆红素与金属离子,尤其是钙及其它二价金属离子,形成了胆色素盐或配位给合物,并与糖蛋白等螯合成了大分子复合物,这是胆色素类结石难溶的主要原因.     

An Analytical Method for the Separation and Determination of As(III) and As(V) in Seepage and Acid Mine Drainage Water

To avoid changes in the original As species distribution in natural water after sampling, a method of immediate separation of As(V) by anion exchange at the sampling site was developed. The procedure consists of two steps. The total concentration of arsenic is determined in one part of the water sample acidified on site. Another part of the water samples is pressed through a column filled with an anion exchanger. The As(III) species that is not redox-stable remains in the effluent of the sorbents column and can be analyzed with conventional methods after stabilization by addition of conc. HNO₃. As(V) is sorbed by the exchanger material. The As(V) concentration can be calculated as the difference between As_sol and As(III), neglecting very low contents of methylated species. Oxidation of Fe(II) by air followed by co-precipitation of arsenic with iron hydroxide was applied in field experiments to minimize the As concentration in seepage and mining water.     

Arsenic Speciation in As(III)- and As(V)-Treated Soil Using XANES Spectroscopy

Arsenic (As) is a toxic trace element that occurs naturally in groundwater and soils. Understanding the reactions of arsenite (As(III)) and arsenate (As(V)) with soil and mineral surfaces is critical for predicting the fate and transport of As in the environment and developing better ways to remediate As-contaminated areas. This investigation uses X-ray absorption near edge spectroscopy (XANES) to evaluate the solid phase oxidation state and mineral surface binding sites in three agricultural soil samples from California, USA by fitting linear combinations of XANES spectra derived from several synthetic and well characterized As(III)- and As(V)-treated model compounds (Fe and Al metal hydroxides and aluminosilicate illite clay mineral). The results suggest that As(III) is either partially or completely oxidized to As(V) when reacted with soil in an aqueous, batch reaction. The As(III)-treated Aiken soil was composed of 60% As(III) attached to surfaces similar to lepidocrocite (γ-FeOOH)) and 40% As(V) attached to aluminosilicate (illite). The Fallbrook soil completely oxidized As(III) and the product was As(V) adsorbed on Al hydroxide (gibbsite, γ-Al(OH)₃) (62%), illite (16%), and lepidocrocite (γ-FeOOH) (22%). The reaction of As(III) with Wyo soil resulted in 42% As(III) adsorbed on surface similar to goethite and 58% As(V) adsorbed on lepidocrocite. Arsenic(V) adsorption on soil resulted in stable As(V) surface complexes that were well described by XANES spectra from As(V) adsorption complexes on gibbsite, illite, and lepidocrocite.     

Method Development for the Speciation of Chromium in River and Industrial Wastewater Using GFAAS

A simple, sensitive and inexpensive method for the speciation of Cr(VI) and Cr(III) in river and industrial wastewater was developed, optimized and validated. Samples were collected, filtered and then chromium species were determined in the filtrate. In the filtrate, total Cr was determined directly by Graphite Furnace Atomic Absorption Spectrometry (GFAAS). A portion of the filtered sample was buffered to pH 6.4, extracted with Amberlite LA-2/MIBK and finally Cr(VI) was determined in the organic extract and Cr(III) in the aqueous phase using GFAAS. The method was evaluated by analysis of the certified reference material, CRM 544, and good accuracy was obtained. The limit of detection for Cr(VI) and Cr(tot)/Cr(III) was found to be 0.30 and 0.08 µg L⁻¹, respectively, and a precision expressed as relative standard deviation of better than 11% was achieved for nine replicates. A number of water samples from the Tinishu Akaki River, Ethiopia, and wastewater samples from a chemical plant in Germany, were analysed. In addition to the GFAAS method, Cr(tot) was also determined using ICP-MS (in CRM 544, lyophilized water, and Tinishu Akaki River water samples) and Cr(tot) and Cr(VI) using UV-VIS spectrophotometry (in CRM 544 and industrial wastewater samples). Good agreement between the different methods was found.     

Capillary electrophoresis on-line coupled with hydride generation-atomic fluorescence spectrometry for speciation analysis of selenium

A new method for speciation analysis of two inorganic selenium species was developed by on-line coupling of capillary electrophoresis (CE) with hydride generation-atomic fluorescence spectrometry (HG-AFS) and on-line conversion of Se(VI) to Se(IV). Baseline separation of Se(VI) and Se(IV) was achieved by CE in a 50 cm x 75 microm inside diameter (ID) fused-silica capillary at -20 kV using a mixture of 15 mmol.L(-1) NaH2PO4 and 0.5 mmol.L(-1) cetyltrimethylammonium bromide (pH 7.5) as electrolyte buffer. Se(VI) was on-line reduced to Se(IV) by mixing the CE effluent with concentrated HCl. The precision (relative standard deviation, RSD, n=7) ranged from 0.7 to 1.3% for migration time, 6.4 to 3.7% for peak height response, and 5.9 to 6.1% for peak area for the two selenium species at the 500 microg.L(-1) (as Se) level. The detection limits were 33 and 25 microg.L(-1) (as Se) for Se(VI) and Se(IV), respectively. The recoveries of the two selenium species in five locally collected water samples ranged from 88 to 114%. The developed method was applied to speciation analysis of inorganic selenium species in spiked natural water samples.     

Cloud point extraction combined with graphite furnace atomic absorption spectrometry for the determination of chromium species and their distribution in cigarette and cigarette ash

In this article, the contents and distribution of total chromium, Cr(III) and Cr(VI) in various cigarettes and cigarette ashes were determined by using a cloud point extraction (CPE) separation/preconcentration combined with graphite furnace atomic absorption spectrometric (GFAAS) detection. Different extraction reagents, such as tetramethylammonium hydroxide (TMAH), Na₂HPO₄, Na₂CO₃/NaOH, NaOH and H₂O, were tested for the extraction of Cr species, and the extraction efficiency was estimated. The experimental results showed that TMAH was the most efficient extraction reagent for the analyte in cigarette samples. By using the established method, the total chromium, Cr(III) and Cr(VI) in various cigarettes and cigarette ashes were determined and their distribution was studied. It was found that Cr(III) is a main species in cigarettes, but that it can be partly oxidized to Cr(VI) during smoking.     

方便面中砷元素的形态分析

建立了硝酸提取,高效液相色谱一原子荧光联用技术测定方便面中不同砷形态的分析方法。样品经0．15mol／L盐酸溶液超声提取后离心过滤,上机测试。实验表明：砷的4种形态亚砷酸[As（Ⅲ）]、砷酸[As（V）]、一甲基胂酸（MMA）和二甲基胂酸（DMA）的线性范围为0-50μg／L,相关系数（r）均优于0．9990,检出限在2～8μg／L之间,砷各形态的测量重复性（以RSD表示）均小于5％,样品的加标回收率为78％-118％。同时用原子荧光光度计检测了样品中总砷,并将两种方法测定结果进行了对比,结果符合理论以及文献报道。该方法操作简单快速、结果准确可靠,适用于方便面中砷形态的分析测定。