Ru、Rh、Pd掺杂GaSb的电子结构和光学性质

运用第一性原理计算方法研究了过渡族金属TM(TM=Ru、Rh、Pd)掺杂GaSb的电子结构和光学性质,结果表明:TM掺杂GaSb主要以TM替代Ga(TM @Ga)缺陷存在,并可增强GaSb半导体材料对红外光区光子的响应,使体系光学吸收谱的吸收边红移;TM@Ga所引入的杂质能级分布于零点费米能级附近,这极大地增强了体系的介电性能,促进了电子-空穴对的产生和迁移,因而提升了掺杂体系的光电转换效率;Ru 掺杂对GaSb光学性质的改善最为明显,当掺杂浓度为6.25%(原子数分数)且均匀掺杂时,Ru掺杂GaSb体系对红外光区光子的吸收幅度最大,有效提升了GaSb光电转换效率和光催化活性。     

折射率连续周期分布一维光子晶体的带隙分析

微分传输矩阵法(DTMM)可以解析求解一维非均匀介质中的波动方程。用该方法,对几种折射率连续且周期分布的一维光子晶体进行了带隙分析。结果表明,折射率连续变化的一维周期结构也具有明显的带隙特征,折射率变化越平缓,光带隙的宽度越小。对于折射率正弦变化的一维光子晶体,其折射率变化得越剧烈,光子晶体的中心频率越小,带隙越宽;同时,折射率的平均值越大,中心频率越小,带隙越窄。由于材料的物理特性都是连续变化的,同样可以把结构推广到一维周期性功能梯度材料。     

一种新型偶氮染料在扭曲向列相液晶显示取向中的应用

研究了一种新型偶氮材料sy03在光控取向中的应用。将sy03加入聚酰亚胺SE-3310(Nissan)与N,N-二甲基甲酰胺(DMF)的混合溶液中作为90°扭曲向列相液晶显示(Twisted nematic liquid crystal display,TN-LCD)的光取向材料,测量由它作为取向膜的扭曲向列型盒的电光特性与仅用SE-3310取向的扭曲向列型盒电光特性比较,发现sy03偶氮的加入使得扭曲向列型盒的响应时间短到98 ms、阈值电压也降低到1.7 V左右。而且随曝光时间的增加,响应时间和衬比度都有所提高,电光响应曲线也更为陡峭。加热到150℃后,其电光特性并没有明显变化,证明了它良好的热稳定性。最后通过测量偏振紫外吸收光谱,分析得出液晶分子易取向方向与激发光源偏振方向垂直。     

Polyphenolic Composition and Antioxidant Activity (ORAC,EPR and Cellular) of Different Extracts of Argylia radiata Vitroplants and Natural Roots

Plant biochemistry studies have increased in recent years due to their potential to improve human health. Argylia radiata is an extremophile plant with an interesting polyphenolic profile. However, its biomass is scarce and occasionally available. Argylia in vitro biomass was obtained from tissue culture and compared with in vivo roots regarding its polyphenolic and flavonoid content. Different solvents were used to prepare extracts from the in vitro tissue of callus and aerial plant organs and in vivo roots. UPLC-MS/MS was used to assess the chemical composition of each extract. ORAC-FL and scavenging of free radicals (DPPH and OH) methods were used to determine the antioxidant capacity of extracts. Furthermore, the biological activity of the extracts was established using the cellular antioxidant activity method. The vitroplants were a good source of polyphenols (25–68 mg GAE/100 g tissue FW), and methanol was the most efficient solvent. Eight polyphenolic compounds were identified, and their antioxidant properties were investigated by different chemical methods with EPR demonstrating its specific scavenging activity against free radicals. All extracts showed cellular dose-dependent antioxidant activity. The methanolic extract of vitroplants showed the highest cellular antioxidant activity (44.6% and 51%) at 1 and 10 µg/mL of extract, respectively. Vitroplants of A. radiata are proposed as a biotechnological product as a source of antioxidant compounds with multiple applications.     

Fluorogenic Detection of Human Serum Albumin Using Curcumin-Capped Mesoporous Silica Nanoparticles

Mesoporous silica nanoparticles loaded with rhodamine B and capped with curcumin are used for the selective and sensitive fluorogenic detection of human serum albumin (HSA). The sensing mesoporous silica nanoparticles are loaded with rhodamine B, decorated with aminopropyl moieties and capped with curcumin. The nanoparticles selectively release the rhodamine B cargo in the presence of HSA. A limit of detection for HSA of 0.1 mg/mL in PBS (pH 7.4)-acetonitrile 95:5 v/v was found, and the sensing nanoparticles were used to detect HSA in spiked synthetic urine samples.     

粘弹性地基上含孔隙的石墨烯增强功能梯度板的振动

为分析粘弹性地基上含孔隙的石墨烯增强功能梯度板的自由和强迫振动特性,基于三参数粘弹性地基模型及复合材料薄板理论,建立了粘弹性地基上含孔隙石墨烯增强功能梯度板的运动方程,用伽辽金法求解其固有频率和动力响应,并通过数值算例分析了粘弹性地基参数、孔隙率、孔隙类型及石墨烯纳米片分布模式、含量等因素对自由振动和动力响应的影响．结果表明,固有频率随着孔隙率的增大非单调变化,孔隙率对固有频率的影响随着地基参数、孔隙类型的不同而不同．另外,在三种孔隙类型中,上下表面层含有最少孔隙数量的板的动挠度最小,且其动挠度随着孔隙率的增大而微弱提高．     

Tightly coupled aeroelastic model implementation dedicated to fast aeroelastic tailoring optimisation of high aspect ratio composite wing

This paper presents the development of a code, called GEBTAero, dedicated to very flexible aircraft (VFA) aeroelasticity and especially the evaluation of aeroelastic tailoring effect on critical speeds. GEBTAero is an open source code consisting in a tightly coupling between a geometrically exact beam theory -and a finite state induced flow unsteady aerodynamic model, including an homogenisation tool. This model has been implemented in Fortran using GEBT code and optimised open source libraries with particular focus on computation speed. Besides a non linear transient dynamic simulation capacity, a particular focus is put on the fast critical speed computation strategy using a non-iterative modal approach about the geometrically non linear deformed shape of the wing with the computation of only a few aeroelastic modes. Computation speed and accuracy of this implementation is assessed using widely used aeroelastic test cases and compared successfully to other aeroelastic codes. Configurations using aeroelastic tailoring, which are the core target of this solver, are then evaluated numerically on a representative high aspect ratio anisotropic composite wing and a simple 2-ply composite laminates with both variable ply orientations. It illustrates the strong correlation between the structural bending/twisting coupling of an unbalanced composite laminates and its critical aeroelastic speed. It also shows the high sensitivity of ply orientation on the aeroelastic behaviour.     

Mg-N阴阳离子共掺杂SnO2的第一性原理研究

基于密度泛函理论,利用第一性原理计算Mg-N阴阳离子双受主共掺杂SnO₂的电子结构、电荷密度分布和缺陷形成能.Mg、N分别取代SnO₂晶体中的Sn和O,掺杂浓度分别为4.17at;、2.08at;,Mg-N键之间的共价性明显高于Sn-O键,富氧条件下,Mg-N共掺杂的缺陷形成能为2.67 eV,有利于进行有效的受主替代掺杂.Mg单受主掺杂SnO₂时,增加了带隙宽度,费米能级进入价带,Mg-N共掺杂SnO₂时,带隙窄化,表现出明显的p型导电类型.     

Superhard monoclinic BN allotrope in M-carbon structure

Superhard materials have always attracted people's interesting due to their extensive industrial applications. In this work, two reasonable superhard monoclinic allotropes of boron nitrides with space group of Cm have been designed based on previously proposed M-carbon structure using first-principles calculations. Our results show that Cm-BN-1 and Cm-BN-2 are dynamically stable, and they are direct semiconductors with bandgap of 2.69 and 3.90 eV, respectively. Moreover, they could be potential superhard materials with Vickers hardness of 58.0 and 60.4 GPa, respectively. This work provides insights for exploring new superhard boron nitrides materials.     

Enhanced-performance relative humidity sensor based on MOF-801 photonic crystals

We proposed an enhanced-performance relative humidity (%RH) nano-sensor based on MOF-801/TiO₂ one-dimensional photonic crystals (1DPC). The maximum reflectance-peak wavelength of it shifted obviously in the range of 20%-90% under varying %RH levels, due to the highly moisture-sensitive MOF-801 film in the 1DPC structure. It was demonstrated that the linear spectrum sensitivity of the MOF-801/TiO₂ %RH 1DPC sensor is exceeding 119 pm/%RH from 20%RH to 90% RH, and the sensitivity of reflection power variations exhibits 1.34 dB/%RH with the resolvable relative humidity variation less than 0.1%RH at 15°C. Meanwhile, the sensor shows a fast optical response time less than 100 ms with exceptional repeatability and reliability, which promises successful measurements of human respiration. Moreover, the sensor performance on the structure of 1DPC is investigated, representing a tradeoff between the sensing sensitivity and response time.