Alloyed Crystalline CdSe1-xSx Semiconductive Nanomaterials – A Solid State 113Cd NMR Study

Solid-state NMR analysis on wurtzite alloyed CdSe_1−xS_x crystalline nanoparticles and nanobelts provides evidence that the ¹¹³Cd NMR chemical shift is not affected by the varying sizes of nanoparticles, but is sensitive to the S/Se anion molar ratios. A linear correlation is observed between ¹¹³Cd NMR chemical shifts and the sulfur component for the alloyed CdSe_1−xS_x (0<x<1) system both in nanoparticles and nanobelts (δ_Cd=169.71⋅X_S+529.21). Based on this correlation, a rapid and applied approach has been developed to determine the composition of the alloyed nanoscalar materials utilizing ¹¹³Cd NMR spectroscopy. The observed results from this system confirm that one can use ¹¹³Cd NMR spectroscopy not only to determine the composition but also the phase separation of nanomaterial semiconductors without destruction of the sample structures. In addition, some observed correlations are discussed in detail.     

Liquid-Phase Quasi-Epitaxial Growth of Highly Stable,Monolithic UiO-66-NH2 MOF thin Films on Solid Substrates

High quality, monolithic UiO-66-NH₂ thin films on diverse solid substrates have been prepared via a low temperature liquid phase epitaxy method. The achievement of continuous films with low defect densities and great stability against high temperatures and hot water is proven, clearly outperforming other reported types of MOF thin films.     

Nitro-, Cyano-, and Methylfuroxans,and Their Bis-Derivatives: From Green Primary to Melt-Cast Explosives

In the present work, we studied in detail the thermochemistry, thermal stability, mechanical sensitivity, and detonation performance for 20 nitro-, cyano-, and methyl derivatives of 1,2,5-oxadiazole-2-oxide (furoxan), along with their bis-derivatives. For all species studied, we also determined the reliable values of the gas-phase formation enthalpies using highly accurate multilevel procedures W2-F12 and/or W1-F12 in conjunction with the atomization energy approach and isodesmic reactions with the domain-based local pair natural orbital (DLPNO) modifications of the coupled-cluster techniques. Apart from this, we proposed reliable benchmark values of the formation enthalpies of furoxan and a number of its (azo)bis-derivatives. Additionally, we reported the previously unknown crystal structure of 3-cyano-4-nitrofuroxan. Among the monocyclic compounds, 3-nitro-4-cyclopropyl and dicyano derivatives of furoxan outperformed trinitrotoluene, a benchmark melt-cast explosive, exhibited decent thermal stability (decomposition temperature >200 °C) and insensitivity to mechanical stimuli while having notable volatility and low melting points. In turn, 4,4′-azobis-dicarbamoyl furoxan is proposed as a substitute of pentaerythritol tetranitrate, a benchmark brisant high explosive. Finally, the application prospects of 3,3′-azobis-dinitro furoxan, one of the most powerful energetic materials synthesized up to date, are limited due to the tremendously high mechanical sensitivity of this compound. Overall, the investigated derivatives of furoxan comprise multipurpose green energetic materials, including primary, secondary, melt-cast, low-sensitive explosives, and an energetic liquid.     

Reducing Detrimental Defects for High‐Performance Metal Halide Perovskite Solar Cells

In several photovoltaic (PV) technologies, the presence of electronic defects within the semiconductor band gap limit the efficiency, reproducibility, as well as lifetime. Metal halide perovskites (MHPs) have drawn great attention because of their excellent photovoltaic properties that can be achieved even without a very strict film‐growth control processing. Much has been done theoretically in describing the different point defects in MHPs. Herein, we discuss the experimental challenges in thoroughly characterizing the defects in MHPs such as, experimental assignment of the type of defects, defects densities, and the energy positions within the band gap induced by these defects. The second topic of this Review is passivation strategies. Based on a literature survey, the different types of defects that are important to consider and need to be minimized are examined. A complete fundamental understanding of defect nature in MHPs is needed to further improve their optoelectronic functionalities.     

Emerging Bottom‐Up Strategies for the Synthesis of Graphene Nanoribbons and Related Structures

The solution‐phase synthesis is one of the most promising strategies for the preparation of well‐defined graphene nanoribbons (GNRs) in large scale. To prepare high quality, defect‐free GNRs, cycloaromatization reactions need to be very efficient, proceed without side reaction and mild enough to accommodate the presence of various functional groups. In this Minireview, we present the latest synthetic approaches for the synthesis of GNRs and related structures, including alkyne benzannulation, photochemical cyclodehydrohalogenation, Mallory and Pd‐ and Ni‐catalyzed reactions.     

A Factorial Design Approach for Hydrothermal Synthesis of Phase‐Pure AgInO2: A Parametric Optimization Study

Owing to a wide range of industrial applications and fundamental importance, delafossite compounds have gathered tremendous interest in research community. In this study, the formation of hexagonal nanoplates of AgInO₂ mainly dominated by (00l) facets with no metallic Ag impurity, reported using a facile hydrothermal route at 180 °C using KOH as mineralizer by adopting a factorial design approach. Rietveld analysis of the powder XRD pattern and SAED confirms the rhombohedral system of AgInO₂. FE‐SEM image shows a uniform hexagonal plate‐like morphology with an average width of about 300 nm and thickness of 70 nm. XPS and EDX analysis confirm potassium ion free AgInO₂. A specific surface area of about 48.5 m² g^?1 is arrived from N₂ adsorption studies. Temperature‐dependent AC impedance measurements revealed an activation energy of 0.24 eV/f.u. Further, TG‐DTA studies found that the compound is stable in air up to 595 °C.     

Polymer Nanocontainers for Intracellular Delivery

Carriers for intracellular delivery are required to overcome limitations of therapeutic agents such as low specificity, systemic toxicity, high clearance rate, and low therapeutic index. Nanocontainers comprised of an aqueous core and a polymer shell have received increasing attention because they readily combine stimuli response to improve intracellular payload release and surface modification to enhance selectivity towards the desired region of action. This Minireview summarizes the design and properties of polymer nanocontainers for intracellular delivery, classified according to the polymer architecture.     

Bridging Small Molecules to Conjugated Polymers: Efficient Thermally Activated Delayed Fluorescence with a Methyl‐Substituted Phenylene Linker

Based on a “TADF + Linker” strategy (TADF=thermally activated delayed fluorescence), demonstrated here is the successful construction of conjugated polymers that allow highly efficient delayed fluorescence. Small molecular TADF blocks are linked together using a methyl‐substituted phenylene linker to form polymers. With the growing number of methyl groups on the phenylene, the energy level of the local excited triplet state (³LE_b) from the delocalized polymer backbone gradually increases, and finally surpasses the charge‐transfer triplet state (³CT). As a result, the diminished delayed fluorescence can be recovered for the tetramethyl phenylene containing polymer, revealing a record‐high external quantum efficiency (EQE) of 23.5 % (68.8 cd A^?1, 60.0 lm W^?1) and Commission Internationale de l′Eclairage (CIE) coordinates of (0.25, 0.52). Combined with an orange‐red TADF emitter, a bright white electroluminescence is also obtained with a peak EQE of 20.9 % (61.1 cd A^?1, 56.4 lm W^?1) and CIE coordinates of (0.36, 0.51).     

High Compression‐Induced Conductivity in a Layered Cu–Br Perovskite

We show that the onset pressure for appreciable conductivity in layered copper‐halide perovskites can decrease by ca. 50 GPa upon replacement of Cl with Br. Layered Cu–Cl perovskites require pressures >50 GPa to show a conductivity of 10^?4 S cm^?1, whereas here a Cu–Br congener, (EA)₂CuBr₄ (EA=ethylammonium), exhibits conductivity as high as 2×10^?3 S cm^?1 at only 2.6 GPa, and 0.17 S cm^?1 at 59 GPa. Substitution of higher‐energy Br 4p for Cl 3p orbitals lowers the charge‐transfer band gap of the perovskite by 0.9 eV. This 1.7 eV band gap decreases to 0.3 eV at 65 GPa. High‐pressure X‐ray diffraction, optical absorption, and transport measurements, and density functional theory calculations allow us to track compression‐induced structural and electronic changes. The notable enhancement of the Br perovskite's electronic response to pressure may be attributed to more diffuse Br valence orbitals relative to Cl orbitals. This work brings the compression‐induced conductivity of Cu‐halide perovskites to more technologically accessible pressures.     

Covalent Organic Framework for Improving Near‐Infrared Light Induced Fluorescence Imaging through Two‐Photon Induction

Fluorescent materials exhibiting two‐photon induction (TPI) are used for nonlinear optics, bioimaging, and phototherapy. Polymerizations of molecular chromophores to form π‐conjugated structures were hindered by the lack of long‐range ordering in the structure and strong π–π stacking between the chromophores. Reported here is the rational design of a benzothiadiazole‐based covalent organic framework (COF) for promoting TPI and obtaining efficient two‐photon induced fluorescence emissions. Characterization and spectroscopic data revealed that the enhancement in TPI performance is attributed to the donor‐π‐acceptor‐π‐donor configuration and regular intervals of the chromophores, the large π‐conjugation domain, and the long‐range order of COF crystals. The crystalline structure of TPI‐COF attenuates the π–π stacking interactions between the layers, and overcomes aggregation‐caused emission quenching of the chromophores for improving near‐infrared two‐photon induced fluorescence imaging.