Dynamic study of photosensitized one-electron oxidation of polyG by menadione

Quinones including menadione are ubiquitous in nature. They play important roles in aerobic respira- tion and photosynthesis[1,2]. In addition, exogenous quinones are used as antibiotics and anticancer drugs. Their function is closely related to their red…     

PREPARATION OF POLY（METHYL METHACRYLATE）/LAYERED DOUBLE HYDROXIDES NANOCOMPOSITES via in situ SOLUTION POLYMERIZATION

An exfoliated layered double hydroxides/poly(methyl methacrylate)(LDHs/PMMA)nanocomposite was prepared by in situ solution polymerization of methyl methacrylate(MMA)in the presence of 4-vinylbenzenesulfonate intercalated LDHs(MgAl-VBS LDHs).MgAl-VBS LDHs was prepared by the ion exchange method,and the structure and composition of the MgA1-VBS LDHs were determined by X-ray diffraction(XRD),infrared spectroscopy and elemental analysis.XRD and transmission electron microscopy(TEM)were employed to examine the structure of LDHs/PMMA nanocomposite.It was indicated that the LDHs layers were well exfoliated and dispersed in the PMMA matrix.The grafting of PMMA onto LDHs was confirmed by the extraction result and the weight fraction of grafted PMMA increased as the weight fraction of LDHs in the nanocomposites increased.     

Unexpected formation of the novel fluorinated diazenes

Fluoroalkanesulfonyl azides reacted with morpholine giving unexpectedly N-fluoroalkanesulfonyl-N-morpholino diazenes, which were fully characterized by using spectral methods and X-ray diffraction analysis.     

Electron microscopic phase analysis of BN-thin films

A series of BN films was deposited by means of r.f. magnetron sputtering of a h-BN target onto Si(1OO) surfaces. Hereby, the substrate bias voltage was varied. Special interest is focussed to the influence of the deposition parameters on the orientation of the growing hexagonal BN film with respect to the substrate. For structural investigation, cross section samples were prepared. In addition to HRTEM and diffraction investigations, especially electron energy loss spectroscopy (EELS) was applied successfully for phase identification. For negative bias voltages of U _B =–300 V and U _B =–350V, we found a phase system consisting of a first-grown 25 nm thick layer of hexagonal structure with the c axis parallel to the substrate surface followed by the cubic phase.Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Characterisation and analysis of micro-contaminants in industrial polymers

Analysis of very small particles can present problems. This paper describes the application of temperature programmed solid insertion probe mass spectrometry (TP-SIP-MS), scanning electron microscopy and SEM X-ray microanalysis to the identification of foreign particles present in an industrial product. The relative advantages and limitations of the techniques are discussed. It is shown that TP-SIP-MS is a powerful tool for such work and complements the use of more conventional microanalytical methods.     

Determining molecular structures and conformations directly from electron diffraction using a genetic algorithm.

A global optimization strategy, based upon application of a genetic algorithm (GA), is demonstrated as an approach for determining the structures of molecules possessing significant conformational flexibility directly from gas-phase electron diffraction data. In contrast to the common approach to molecular structure determination, based on trial-and-error assessment of structures available from quantum chemical calculations, the GA approach described here does not require expensive quantum mechanical calculations or manual searching of the potential energy surface of the sample molecule, relying instead upon simple comparison between the experimental and calculated diffraction pattern derived from a proposed trial molecular structure. Structures as complex as all-trans retinal and p-coumaric acid, both important chromophores in photosensing processes, may be determined by this approach. In the examples presented here, we find that the GA approach can determine the correct conformation of a flexible molecule described by 11 independent torsion angles. We also demonstrate applications to samples comprising a mixture of two distinct molecular conformations. With these results we conclude that applications of this approach are very promising in elucidating the structures of large molecules directly from electron diffraction data.     

过氧化苯甲酰的光敏电荷转移分解反应及引发甲基丙烯酸甲酯的聚合

过氧化苯甲酰(BPO)的光诱导分解曾为许多工作者所注意。Walling和Gibian认为:以二苯酮为敏化剂时,BPO的敏化光解是通过三重态的能量转移过程。Encinas和Lissi则认为敏化是通过单重激发态使激发能转移至过氧化物基态的热振动态,从而导致过氧化物的分解。Tokumarur是最早提出过氧化苯甲酰光敏化诱导分解过程中存在着激基复合物(Exciplex)的可能性。最近他们又进一步研究以BPO为猝灭剂去猝     

Cellulose Synthesized by Acetobacter Xylinum in the Presence of Acetyl Glucomannan

Acetobacter xylinum was cultured in Hestrin-Schramm medium (control medium) and Hestrin-Schramm medium containing acetyl glucomannan (mannan medium). Loose bundles of the cellulose microfibrils are formed in the mannan medium in contrast to the normal ribbons being produced in the control medium. Rapid-freeze and substitution method followed by metal-shadowing revealed the droplet-like structures around the microfibril synthesized in the mannan medium. The cellulose synthesized in the mannan medium was stained heavily by the periodic acid-thiocarbohydrazide-silver proteinate (PATAg) method, while the cellulose synthesized in the control medium was not stained. X-ray diffractometry and FT-IR spectroscopy indicated that the addition of mannan induced a change in the crystal structure from the algal-bacterial type to the cotton-ramie type. Thus the presence of acetyl glucomannan in the medium prevents the assembly of cellulose microfibrils and changes the crystal structure of cellulose.     

LaxBa1—xCoO3系导电陶瓷导电性研究

对ＬａｘＢａ１－ｘＣｏＯ导电陶瓷的导电性及其导电机制进行了研究，在ｘ＝０．５ｍｏｌ处，导电陶瓷具有金属态导是性，在Ｌａ０．５Ｂａ０．５ＣｏＯ３陶瓷中，存在着氧缺位和导电电子，并且此种导电陶瓷具有较高的电子和氧离子混合导电特性。     

Direct electron transfer reaction of glucose oxidase at bare silver electrodes and its application in analysis

The direct electron transfer reaction of glucose oxidase (GOx) at a bare silver electrode is verified. The electron transfer number n = 2, electron transfer coefficient α = 0.45 and rate constant of the electrochemical reaction K_s = 0.1 s⁻¹ are obtained. This communication presents a multimolecular adsorption model to explain the properties of the direct electron reaction between GOx and bare silver electrodes. The residual valence force may be an important factor to ensure a direct electron transfer reaction on the bare electrode. On the basis of the experimental fact that only biologically active GOx exhibits electrochemical activity in solution, a facile analytical method for analyzing the active GOx concentration is developed. The results determined correspond very well to that of a spectrometric method.