离子通道电子束回旋脉塞的等离子体波效应

研究了离子通道回旋电子束脉塞（ICECM）中的等离子体波非线性效应。利用流体理论与自洽非线性理论方法对ICECM中等离子体波效应的微观机理进行了分析。研究发现,等离子体波加强了电子束的纵向群聚,束-波互作用的能量交换效率及系统增益得到明显提高。数值模拟计算表明,对于中等等离子体密度、1.5kA电流和1MV加速电压的电子束,系统能够获得的脉冲功率和频率分别为200MW和280GHz的毫米波束。     

电子束泵浦氩中高能电子分布的理论计算

改进了文献中报导的Boltzmann基本方程。与Boltzmann基本方程相比,改进后的Boltzmann方程更全面地描述了电子与基态氩原子碰撞的物理过程,并能计算出整个能量区间的电子分布。利用Boltzmann基本方程和改进的Boltzmann方程,对电子束泵浦氩中能量大于氩原子第一激发态能量(11.56eV)的高能电子分布函数进行了理论计算。计算中,选取了电子碰撞氩的微分电离截面和激发截面的解析表达式。对计算所得的稳态电子分布函数以及达到稳态分布所需的特征时间进行了分析和讨论。     

An efficient method for computing the QTAIM topology of a scalar field: The electron density case

An efficient method for computing the quantum theory of atoms in molecules (QTAIM) topology of the electron density (or other scalar field) is presented. A modified Newton–Raphson algorithm was implemented for finding the critical points (CP) of the electron density. Bond paths were constructed with the second‐order Runge–Kutta method. Vectorization of the present algorithm makes it to scale linearly with the system size. The parallel efficiency decreases with the number of processors (from 70% to 50%) with an average of 54%. The accuracy and performance of the method are demonstrated by computing the QTAIM topology of the electron density of a series of representative molecules. Our results show that our algorithm might allow to apply QTAIM analysis to large systems (carbon nanotubes, polymers, fullerenes) considered unreachable until now. © 2012 Wiley Periodicals, Inc.     

Radiation chemistry of tris(acetylacetonato) cobalt(iii) in aqueous solutions

Abstract

On radiolysis tris(acetylacetonato) cobalt(III) in aqueous solutions is found to get reduced by reaction with (1) hydrated electrons, (2) H atoms, (3) OH radicals and (4) C₂H₂OH radicals. The bimolecular rate constants for the first three reactions, determined by competition kinetics are: 4 × 10¹⁰, 2.3 × 10⁹ and 4.7 × 10⁹ M^?1sec^?1 respectively. Absorption spectra of the irradiated solutions indicate the formation of bis(acetylacetonato) cobalt(II) from reaction (1), but not from (3). The total cobaltous yield in air-free solutions is given byG(Co⁺⁺) = 5.6 and 6.5 at pH 6.5 and 1 respectively. It appears that G_eaq- ∽ _H ⁺ G_oH ∽ 2.8 in neutral solutions. Considerations of material balance for the primary yields of radiolysis of water suggest the possibility that the so-called independent H-atoms in neutral solutions are probably excited water molecules or ion-pairs.     

Electron radiation damage in copper in the high voltage electron microscope

The various factors influencing the nucleation of radiation damage in the HVEM are reviewed. A method for obtaining quantitative information from observations is given. The effect of reirradiation at room temperature on the damage formed at elevated temperatures is shown. This effect may give experimental information concerning the strain fields surrounding large dislocation loops.     

Poly(methyl methacrylate‐co‐pentaerythritol tetraacrylate‐co‐butyl methacrylate)‐g‐polystyrene: Synthesis and high oil‐absorption property

Well‐defined high oil‐absorption resin was successfully prepared via living radical polymerization on surface of polystyrene resin‐supported N‐chlorosulfonamide group utilizing methyl methacrylate and butyl methacrylate as monomers, ferric trichloride/iminodiacetic acid (FeCl₃/IDA) as catalyst system, pentaerythritol tetraacrylate as crosslinker, and L ‐ascorbic acid as reducing agent. The polymerization proceeded in a “living” polymerization manner as indicated by linearity kinetic plot of the polymerization. Effects of crosslinker, catalyst, macroinitiator, reducing agent on polymerization and absorption property were discussed in detail. The chemical structure of sorbent was determined by FTIR spectrometry. The oil‐absorption resin shows a toluene absorption capacity of 21 g g^?1. The adsorption of oil behaves as pseudo‐first‐order kinetic model rather than pseudo‐second‐order kinetic model. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Analysis of electron energy distribution function in a magnetically filtered complex plasma

The electron energy distribution function (EEDF) for a magnetically filtered dusty plasma is studied in a dusty double plasma device where the electron energy can be varied from 0.15 eV to ～ 2.8 eV and plasma density from 10 6 cm-3 to 10 9cm-3 . The characteristics of EEDF for these ranges of plasma parameters are investigated in a pristine plasma as well as in a dusty plasma. The results show that in the presence of dust, there is a drastic modification in EEDF patterns in a plasma with higher electron temperature and density than those in a low temperature and low density plasma produced by the magnetic filter.     

Electron Capture Determination of Propoxyphene from Human Plasma

Abstract

A procedure for the determination of propoxyphene (α-d-dimethylamino-1, 2 -diphenyl-3 -methyl-2 -propionoxybutane) in plasma is reported. The method is based on the electron capture characteristics of propoxyphene. The plasma is rendered basic to generate the free amine and extracted with ether. The extract is analyzed by gas chromatography using a 4 foot OV-225 column. An internal standard of imipramine hydrochloride is used to quantitate the propoxyphene. This internal standard is carried through the entire procedure. The ratio of the peak heights of propoxyphene to imipramine is compared to ratios obtained from standards placed in plasma and treated in the same manner as the samples. Six subjects were given propoxyphene at different time intervals, and the data are presented concerning these subjects.     

Transformation of macromonomers into ring‐opening polymerization macroinitiators: A detailed initiation efficiency study

In the present study, n‐butyl acrylate macromonomer (BAMM) (M_n = 1900 g mol^?1; PDI = 1.96) has been synthesized via a high‐temperature polymerization process. Subsequently, the olefinic termini of the BAMM have been transformed into a diol via a dihydroxylation process using KMnO₄ as an oxidizing agent. The OH‐terminated macroinitiator pBA(OH)₂ has subsequently been employed for the ring‐opening polymerization (ROP) of ε‐caprolactone via various catalytic systems, that is, organo‐(1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene), metal (tin(II) 2‐ethylhexanoate), and enzymatic catalysis (Novozym® 435). The obtained pBA‐b‐pCL block copolymers and the initiation efficiency of the BAMM macroinitiator have been investigated via size exclusion chromatography (SEC), electrospray ionization–mass spectrometry (ESI‐MS) hyphenated with SEC and liquid chromatography at the critical conditions of both poly(ε‐caprolactone) (pCL) and pBA. The in vitro enzyme catalysis (eROP) approach proved to be the most efficient catalysis system due to minor transesterification side reactions during the polymerization process. However, side reactions such as transesterifications occur in each catalytic system and—while they cannot be suppressed—they can be minimized. The species generated during the eROP process include the desired block copolymer pBA‐b‐pCL as main species as well as pCL homopolymer and residual macroinitiator pBA(OH)₂. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

On the two methods of kinetic theory of ECRM

The kinetic theory based on the expansion of local field in the guiding center coordinate system, presented by paper[1]–[3], has successfully developed into a theoretical system. The mathematical background and physical explanation of setting up the guiding center coordinate system is expounded in the paper. By using the methods of the guiding center and waveguide coordinate systems respectively, the same dispersion equations for interaction of an axially symmetrical single momentum electron beam with TE_mn field in the circular waveguide are rigorously derived. A number of mistakes in paper[4] are indicated as well.