Single electron transfer–degenerative chain transfer living radical polymerization of N‐butyl acrylate catalyzed by Na2S2O4 in water media

Living radical polymerization of n‐butyl acrylate was achieved by single electron transfer/degenerative‐chain transfer mediated living radical polymerization in water catalyzed by sodium dithionate. The plots of number–average molecular weight versus conversion and ln[M]₀/[M] versus time are linear, indicating a controlled polymerization. This methodology leads to the preparation of α,ω‐di(iodo) poly (butyl acrylate) (α,ω‐di(iodo)PBA) macroinitiators. The influence of polymerization degree ([monomer]/[initiator]), amount of catalyst, concentration of suspending agents and temperature were studied. The molecular weight distributions were determined using a combination of three detectors (TriSEC): right‐angle light scattering (RALLS), a differential viscometer (DV), and refractive index (RI). The methodology studied in this work represents a possible route to prepare well‐tailored macromolecules made of butyl acrylate in an environmental friendly reaction medium. Moreover, such materials can be subsequently functionalized leading to the formation of different block copolymers of composition ABA. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2809–2825, 2006     

Dependence of calculated electron effective attenuation lengths on transport mean free paths obtained from two atomic potentials

We report changes in electron effective attenuation lengths (EALs) resulting from use of transport mean free paths (TMFPs) obtained from the Dirac–Hartree–Fock (DHF) potential instead of the Thomas–Fermi–Dirac (TFD) potential in an algorithm used in the National Institute of Standards and Technology (NIST) Electron Effective‐Attenuation‐Length Database (SRD 82). TMFPs from the former potential are believed to be more reliable than those obtained from the latter potential. We investigated changes in the EALs for selected photoelectron and Auger‐electron lines in four elemental solids (Si, Cu, Ag, and W), for Si 2p photoelectrons of varying energy in SiO₂, and for photoelectrons excited by Al Kα X rays in four candidate gate‐dielectric materials (HfO₂, ZrO₂, HfSiO₄, and ZrSiO₄). For each material, we computed the change in the average EAL for a range of overlayer‐film thicknesses from zero to a maximum value corresponding to attenuation of the substrate signal to 10% of its original value. This EAL change was a maximum for electrons emitted normally from the surface and decreased monotonically with increasing emission angle. The maximum EAL change varied between ?4.4% and 2.6% for the three groups of materials. We found that the maximum EAL change correlated mainly with the TMFP change. We found that TMFP changes in other solids could generally lead to maximum EAL changes between ?2.6% and 1.9% for electron energies between 500 and 2000 eV. For lower energies, the maximum EAL changes could be larger for some solids. Our revised EALs for Si 2p photoelectrons in SiO₂ excited by Mg and Al Kα X rays agree within 0.5% with values reported by Seah and Spencer from a detailed analysis of SiO₂ film‐thickness measurements by XPS and other techniques. Copyright © 2006 John Wiley & Sons, Ltd.     

HER磁镜上硬X射线和热电子测量

一、引言 磁镜运行中,为了要知道它在电子回旋共振加热(ECRH)下形成热电子的参数,我们测量了硬X射线能谱、硬X射线发射的时间特性、不同磁场强度下形成热电子环的位置、以及热电子的脉冲幅度分布等。 HER是中国科学院等离子体物理研究所简单型磁镜装置,它的几何尺寸是,真空室长     

A neutral gas model for electron swarms

A BGK-type Boltzmann equation for a neutral gas is considered as a model for electron swarms, because the gas and the electron Boltzmann equation have a common diffusion approximation. Both full- and half-range theory are developed using orthogonality methods of solution. Preliminary comparisons with diffusion theory are presented.     

铜铝合金中γ_2相沉淀的分析电镜研究

Cu-12.7(wt)%Al合金从900℃高温淬至365℃～500℃温度范围等温不同时间(30秒至15分钟)的试样中形成了大量树枝状的γ_2相沉淀粒子。应用配有X线能谱仪(XEDS)和电子能量损失谱仪(EELS)的分析电子显微镜(JEOL JEM-2000FX型)对上还试样研究,结果表明:这些γ_2相粒子具有富铝的“核心”,长大到粒子线度大于约800nm后以不稳定方式生长成“花朵”状。生长过程中伴随着溶质元素Al由基体向γ_2相内的富集。而且在γ_2相粒子内部呈现出Spinodal分解组织的形貌特征,表明γ_2粒子内形成了化学成分调幅。EELS分析表明试样含氧。     

亲和标记-基质辅助激光解吸电离飞行时间质谱用于蛋白质相对定量方法的研究

将亲和标记技术和基质辅助激光解吸电离飞行时间串联质谱联用,建立了蛋白质相对定量方法,以牛血清白蛋白为实验对象,考察了该方法的准确度、重现性等指标;又以数种标准蛋白混合物为研究对象,考察了该方法的动态范围及相应的标准偏差,为实际生物样品中差异蛋白质分析奠定了基础。     

Macroporous poly(methyl methacrylate) produced by phase separation during polymerisation in solution

Polymethyl methacrylate (PMMA) sponges were obtained by polymerization in a solution with monomer/ethanol ratios up to 20:80. The material obtained after the elimination of the solvent present a homogeneous distribution of dispersed pores up to a monomer/ethanol ratio lower than 40:60. For higher ethanol contents in the reacting mixture, the morphology of the sponge corresponds to a network of PMMA microparticles, leaving large empty spaces leading to highly porous structure. The monomer/ethanol ratio during polymerization has a large influence on the porosity, thermal, and mechanical properties of the material and, for large solvent contents, on the size of the polymer microparticles.     

Stabilization of Graphite Nitrate by Intercalation of Organic Compounds

New thermally stable intercalation compounds of graphite were obtained by the further intercalation of a series of organic compounds into graphite nitrate. The stabilization is explained by the formation of hydrogen bonds between the protonated form of the modifying substance and neutral surrounding molecules.     

自由基链式亲核取代反应(S_(RN)1)的进展

本文评述了自由基链式亲核取代反应的最近进展。内容包括:脂肪族化合物和芳香族化合物按S_(RN)l进行的反应及其机理。