Multiple ionization of argon accompanied by electron loss and capture of 0.22-6.35 MeV C^q＋ ions

In this paper a projectile ions recoil ions coincidence technique is employed to investigate the target ionization and projectile charge state changing processes in the collision of 0.22-6.35 MeV Cq^＋ （q = 1 - 4） ions with argon atoms. The partial cross section ratios of the double, triple, quadruplicate ionization to the single ionization （or the single capture） of argon associated with single electron loss （or single electron capture） by the projectile are measured and compared with the previous experimental results. In the present experiment, it is observed that the ratios of ionization cross sections R associated with single loss and single capture depend strongly on the projectile charge state and vary significantly with different reaction channels as impact energy increases. In addition, this paper gets empirical scaling laws for the ionization cross section ratios R corresponding to the projectile single loss and finds that the ratios of the double ionization to the single ionization associated with single electron capture remain constant in the present energy range.     

Resonance reaction rate of 21Na(p, γ)22Mg

By using the new Coulomb screening model and most recent experimental results, this paper calculates the resonance reaction rates of ^21Na（p,γ）^22Mg. The derived result shows that the effect of electron screening on resonant reaction is prominent in astrophysical interesting temperature range. In conjunction with the experimental results, the recommended rates of^21Na（p,γ）^22 Mg would increase at least 10%, which undoubtedly affect the nucleosynthesis of some heavier nuclei in a variety of astrophysical sites.[第一段]     

导电分子巯基紫罗碱电子结构的理论计算

用密度泛函B3LYP/6-31G**计算方法,对不同碳链长度和不同氧化态( V2 +/V+.)紫罗碱二硫醇的平衡几何构型及相应电子结构的研究表明,两种氧化态在吡啶环共面性和前线轨道电子集居上的差异与特征,导致氧化态V2 +成为紫罗碱亲合金原子形成Au-S-nVn-S-Au结构的关键组分,自由基V+.则在该结构的氧化还原电子传导中发挥核心作用.S-S核间距与前线轨道能隙的计算结果表明,在紫罗碱二硫醇单分子电导的测量中,亚甲基数n达到12的分子长度是有效的.     

Free electron laser based on the Smith–Purcell radiation

A Smith–Purcell (S–P) free electron laser (FEL) composed of a metallic diffraction flat grating, an open cylindrical mirror cavity and a relativistic sheet electron beam with moderate energy, is presented. The characteristics of this device are studied by theoretical analysis, experimental measurements and particle-in-cell (PIC) simulation method. Results indicate that coherent radiation with output peak power up to 50 MW at millimeter wavelengths can be generated by using relativistic electron beam of moderate energy.     

高性能微通道板除气过程中电阻的变化

比较了高性能微通道板和标准型微通道板在经过相同或类似制管工艺处理前、后电阻的变化，测定了高性能微通道板分别在真空烘烤和2个不同阶段电子清刷后电阻随电压及温度的变化关系。实验结果表明：高性能微通道板的热稳定性优于标准型微通道板，其电阻温度系数为-0.007/℃；经过第二阶段清刷后，电阻随电压的变化缓慢，电压系数为-1.11×10^-4V^-1；用这种材料和工艺制作的低电阻、大动态范围、高稳定性微通道板可满足特种探测器的需求。     

单分子器件与电极间耦合界面对电子传输的影响

利用自恰tight-binding 理论，对由phenalenyl分子构成的全对称三电极纳米单分子器件的电子传导特性进行了理论研究. 通过改变电极与分子界面上的耦合，得出了分子与原子线电极间耦合强度变化对电子传输的影响. 结果显示电子通过phenalenyl分子器件的概率随着分子与电极的耦合强度变弱而减小. 当耦合强度变大时，不仅电子通过phenalenyl分子器件的概率变大，而且在较宽的能带内电子都可以通过phenalenyl分子. 所得结果还揭示出在特定的能区，对称三电极phenalenyl分子可以构成一个无源正负能量开关器件的新特性.     

TEM investigation of the formation mechanism of deformation twins in Fe–Mn–Si–Al TWIP steels

The microstructure of a Fe–Mn–Si–Al twinning-induced plasticity (TWIP) steel exhibiting remarkable work hardening rate under uniaxial tensile deformation was investigated using transmission electron microscopy to uncover the mechanism(s) controlling the nucleation and growth of the mechanically induced twins. The results show that the stair-rod cross-slip deviation mechanism is necessary for the formation of the twins, while large extrinsic stacking faults homogenously distributed within the grains could act as preferential sources for the activation of the deviation process. The influence of such features on the thickness and strength of the twins and the resulting mechanical behaviour is discussed and compared to similar works recently performed on Fe–Mn–C TWIP steels.     

The Tri(imidazole)-Derivative Moiety: A New Category of Electron Acceptors for the Design of Crystalline Hybrid Photochromic Materials

The intermarriage of neutral and tripodal imidazole ligand, tris(4-(1H-imidazol-1-yl)phenyl)amine (TIPA), with zinc phosphite yields two hybrid phosphites, [Zn₂(HPO₃)₂(TIPA)]⋅2 H₂O ( 1 ) and [Zn₃(HPO₃)₃(TIPA)]⋅6 H₂O ( 2 ). Compound 1 has a hybrid sheet with neutral zinc-phosphite chains as supramolecular building blocks (SBBs), whereas 2 exhibits a 3D hybrid architecture with other neutral zincophosphite chains as supramolecular building blocks. The structural discrepancy between 1 and 2 is mainly due to the distinct linkage modes between organic TIPA ligands and inorganic zincophosphite chains. Interestingly, compounds 1 and 2 feature fast photochromism in response to UV light irradiation under ambient conditions. The discrepancy of photochromic performance between 1 and 2 is mainly due to the different geometrical configuration of the TIPA ligand. Different to majority of reported hybrid photochromic compounds driven by photochromic active units, the photochromism in 1 and 2 is derived from the electron transfer (ET) between phosphite and non-photochromic triimidazole-derivative ligand TIPA. Compared with the widely explored nonphotochromic polypyridine-derivative as electron acceptors (EAs), our work provides a new EA model for the design of hybrid photochromic materials based on the ligand-to-ligand ET mechanism. A multiple anti-counterfeiting application based on 1 and 2 was investigated.     

Synthesis of PMHDO‐g‐PDEAEA well‐defined amphiphilic graft copolymer via successive living coordination polymerization and SET‐LRP

A series of well‐defined amphiphilic graft copolymer containing hydrophobic polyallene‐based backbone and hydrophilic poly(2‐(diethylamino)ethyl acrylate) (PDEAEA) side chains was synthesized by sequential living coordination polymerization of 6‐methyl‐1,2‐heptadiene‐4‐ol (MHDO) and single electron transfer‐living radical polymerization (SET‐LRP) of 2‐(diethylamino)ethyl acrylate (DEAEA). Ni‐catalyzed living coordination polymerization of MHDO was first performed in toluene to give a well‐defined double‐bond‐containing poly(6‐methyl‐1,2‐heptadiene‐4‐ol) (PMHDO) homopolymer with a low polydispersity (M_w/M_n = 1.10). Next, 2‐chloropropionyl chloride was used for the esterification of pendant hydroxyls in every repeating unit of the homopolymer so that the homopolymer was converted to PMHDO‐Cl macroinitiator. Finally, SET‐LRP of DEAEA was initiated by the macroinitiator in tetrahydrofuran/H₂O using CuCl/tris(2‐(dimethylamino)ethyl)amine as catalytic system to afford well‐defined PMHDO‐g‐PDEAEA graft copolymers (M_w/M_n ≤ 1.22) through the grafting‐from strategy. The critical micelle concentration (cmc) was determined by ?uorescence spectroscopy with N‐phenyl‐1‐naphthylamine as probe and the micellar morphology was visualized by transmission electron microscopy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Two types of diffusions at the cathode/electrolyte interface in IT-SOFCs

Analytical transmission electron microscopy, in particular with the combination of energy dispersive X-ray spectroscopy (EDX) and electron energy-loss spectroscopy (EELS), has been performed to investigate the microstructure and microchemistry of the interfacial region between the cathode (La_0.6Sr_0.4Co_0.8Fe_0.2O₃, LSCF) and the electrolyte (Gd-doped ceria, GDC). Two types of diffusions, mutual diffusion between cathode and electrolyte as well as the diffusion along grain boundaries, have been clarified. These diffusions suggest that the chemical stability of LSCF and GDC are not as good as previously reported. The results are more noteworthy if we take into consideration the fact that such interdiffusions occur even during the sintering process of cell preparation.