核磁共振成像一维空间编码教学实验

利用梯度磁场实现检测信号的空间编码,是核磁共振成像(MRI)的关键技术.本文采用ccc系列样品将二维问题简化为一维,使用超小型教学用核磁共振成像仪进行了一维空间编码实验研究,并对实验过程及实验结果进行了计算模拟和分析.     

散斑条纹的快速高精度处理技术

本文提出一种快速高精度散斑杨氏条纹(斑纹)场处理方法——同态阀值滤波法。用它实现了散斑场条纹的快速、逐点连续高精度处理。     

Biomagnetic measurements utilising a superparamagnetic marker: a feasibility study

Summary A preliminary study is here reported on a new potential marker for biomagnetic measurements. The marker consists of superparamagnetic polymer microspheres which were detected in the presence of external steady magnetic fields by means of an r.f.-SQUID magnetometer. The particles were prepared in samples differing in the concentration value and immersed in a homogeneous magnetic field of variable intensity. A simple model was taken into account for the distribution of the microspheres in the samples, so that the theoretical values were compared to the marker field values measured by the biomagnetic sensor. The overall sensitivity of the experimental apparatus and the minimum concentration value of the marker were then estimated.     

电子直线加速器束流均方根发射度变化方程

本文导出了考虑外场和束流效应后束流均方根发射度平方变化方程的一般表达式,并就仅考虑外场,仅考虑空间电荷场和仅考虑尾场等三种特殊情况进行了分析。     

Design and fabrication of fluid controlled dynamic optical lens system

A novel small fluid controlled optical lens system that is capable of displaying dynamic variation of its focal length and field-of-view (FOV) is designed and fabricated. In this active lens system, appropriate volume of the optical fluid can be pumped into or out of the lens chamber to provide double-convex (DCX) or double-concave (DCV) lens effect. Simple optical imaging experiments were performed using different sets of glass lenses with fixed focal lengths to determine the optimum lens configuration required for designing a dynamic optical lens system. The experimental results obtained from the glass lenses demonstrate that a combination of a single DCX lens with three DCV lenses provides a wider FOV. The flexible membranes for fluid controlled lenses were fabricated using polydimethylsiloxane polymer material, which has good optical transparency and elasticity. A simple fluid injection system is used to vary the radius of curvature of the lenses, and thereby to change the focal length. A dynamic optical lens system with a combination of one DCX and multiple variable focal length DCV lenses as designed here can image an object with a wide range of focal length and FOV. With this fluid controlled optical system, the FOV and focal length could be continuously varied and a maximum FOV of 118.3° could be achieved. The smallest f-number (f_/#) for this fluid controlled single lens system was found to be 1.3, which corresponds to the numerical aperture value of 0.35.     

The number of ideals in a quadratic field

LetK be a quadratic Geld, and letR(N) be the number of integer ideals inK with norm at most AT. Letx with conductork be the quadratic character associated withK. Then |R(N)−NL(1,x)|⩽Bk ^50/73 N ^23/73(logN)^461/146 forN ≥Ak, whereA andB are constants. ForN ≥Ak ^c,C sufficiently large, the factork ^50/73 may be replaced by (d(k))^4/73 k ^46/73. Dedicated to the memory of Professor K G Ramanathan     

Measurement of acoustic particle velocities in enclosed sound field: Assessment of two Laser Doppler Velocimetry measuring systems

The performances of two Laser Doppler Velocimetry (LDV) systems adapted for measuring the acoustic particle velocities are assessed in enclosed sound field. This assessment is performed by comparing the acoustic velocities measured by means of LDV to reference acoustic velocities estimated from sound pressure measurements. The two LDV systems are based on a single optical bench which delivers an optical signal called Doppler signal. The Doppler signal, which is frequency modulated, is analyzed by means of two signal processing systems, the BSA (Burst Spectrum Analyser from Dantec) on the one hand, and a system specifically developed for the estimation of the acoustic velocity on the other hand. Once the experimental setup has been optimized for minimizing the errors made on the reference velocities, the assessment is performed and shows that both systems can measure the acoustic velocity in enclosed field in two the frequency ranges [0-4 kHz] and [0-2 kHz] respectively for acoustic velocity amplitudes of 10 mm/s and 1 mm/s.     

Calculation of impulsively started incompressible viscous flows

The paper's focus is the calculation of unsteady incompressible 2D flows past airfoils. In the framework of the primitive variable Navier–Stokes equations, the initial and boundary conditions must be assigned so as to be compatible, to assure the correct prediction of the flow evolution. This requirement, typical of all incompressible flows, viscous or inviscid, is often violated when modelling the flow past immersed bodies impulsively started from rest. Its fulfillment can however be restored by means of a procedure enforcing compatibility, consisting in a pre‐processing of the initial velocity field, here described in detail. Numerical solutions for an impulsively started multiple airfoil have been obtained using a finite element incremental projection method. The spatial discretization chosen for the velocity and pressure are of different order to satisfy the inf–sup condition and obtain a smooth pressure field. Results are provided to illustrate the effect of employing or not the compatibility procedure, and are found in good agreement with those obtained with a non‐primitive variable solver. In addition, we introduce a post‐processing procedure to evaluate an alternative pressure field which is found to be more accurate than the one resulting from the projection method. This is achieved by considering an appropriate ‘unsplit’ version of the momentum equation, where the velocity solution of the projection method is substituted. Copyright © 2004 John Wiley & Sons, Ltd.     

Damage and fracture evaluation of granular composite materials by digital image correlation method

This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steelfiber reinforced concrete, sandstone and crystal-polymer composite. The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated. The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform (WT) coefficients of the transform spectrum. The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry, both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials. The project supported by the National Natural Science Foundation of China (10125211 and 10072002), the Scientific Committee of Yunnan Province for the Program of Steel Fiber Reinforced Concrete, and the Institute of Chemical Materials, CAEP at Mianyang