Chemical treatment of TiO2-based coatings formed by plasma electrolytic oxidation in electrolyte containing nano-HA, calcium salts and phosphates for biomedical applications

TiO₂-based coatings were formed on titanium alloy by plasma electrolytic oxidation (PEO) in an electrolyte containing nano-HA, calcium salts and phosphates. Bioactive surface was formed after chemical treatment (NaOH aqueous solution) of the PEO coating. The surface of the PEO coating was mainly composed of Ti, O, Ca and P showing anatase and rutile; while that of the chemically treated PEO (CT-PEO) coating mainly contains Ti, O, Ca and Na showing anatase, rutile and amorphous phase. And the chemically treated surface exhibits dissolution of P and introduction of Na during the chemical treatment process. The chemical treatment has no effect on the chemical states of Ca and Ti of the PEO coating. In addition, the surface constituents of the CT-PEO coating show a uniform distribution near its surface with increasing depth. When incubated in a simulated body fluid for 7 and 14 days, the PEO coating does not exhibit apatite-forming ability; however, apatite was successfully deposited on the CT-PEO coating after 7 days probably due to the formation of hydroxyl functionalized surface, enhancing the heterogeneous nucleation of apatite. The addition of nano-HA in the electrolyte has effects on the surface character and apatite-forming ability of the PEO coating; however, it has no obvious influence on those of the CT-PEO coatings.     

Growth mechanism of amorphous carbon by liquid plasma electrolytic deposition

The growth mechanism of amorphous carbon film by the liquid deposition process is still unclear. In this study, the influence of applied voltages on the surface morphology and microstructure of amorphous carbon films was investigated as well as the bonding probability at the film/substrate interface, and a new mechanism of film growth was proposed from the electrochemistry and non‐equilibrium thermodynamics viewpoints. The results showed that growth of amorphous carbon film involved the island groove morphology; more graphitic carbons are present within the film as the applied voltage increased. A coupling model of the growth mechanism including the ionization–absorption–dehydrogenation process and the chemical volume polymerization is highlighted. Copyright © 2016 John Wiley & Sons, Ltd.     

Enhanced fatigue performance of porous coated Ti6Al4V biomedical alloy

Biofunctional coatings are necessary to improve integration of titanium implants in the host tissue but they may be detrimental for the implant fatigue properties. This study presents an attempt towards enhancement of the in vitro fatigue strength of plasma electrolytic oxidation coated Ti6Al4V alloy by applying shot peening process prior to coating. The electrolytic oxidation was performed in calcium acetate and calcium glycerophosphate electrolytes that allowed formation of porous oxide coatings with high surface free energy and apatite like ability. A deformed surface layer coupled with induced residual compressive stresses seem to affect oxide growth rate and fatigue behavior of the titanium alloy.     

Investigation of the voltage and time effects on the formation of hydroxyapatite-containing titania prepared by plasma electrolytic oxidation on Ti-6Al-4V alloy and its corrosion behavior

Producing titania and hydroxyapatite (HA) bioceramic coating on titanium alloys increases corrosion resistance and biocompatibility of these alloys. Plasma electrolytic oxidation (PEO) is one of the effective techniques for producing this type of coating. This method produces coatings with enough thickness and appropriate adhesion. In this study, titania and HA were directly produced on Ti-6Al-4V by applying PEO process in a Ca- and P-containing electrolyte by changing voltage and time parameters. Morphology and cross section, chemical composition and elements of coatings were investigated by scanning electron microscope, X-ray diffraction and energy dispersive spectroscopy, respectively. Corrosion behavior of the samples was also examined by potentiodynamic polarization and electrochemical impedance spectroscopy. The results indicated that the formation of HA phase with titania needs a minimum voltage below which HA is not formed. By increasing the operation time, the amount of the formed HA increased. Also, the sample coated at 500 V and 15 min showed the best corrosion behavior in Ringer's solution.     

电解铜箔表面电沉积Zn-Ni-P-La合金工艺

为了缓解我国高性能铜箔依靠进口的局面,进行了将类金属(P)和稀土金属(La)引入电解铜箔锌镍合金镀层中以获得高耐腐蚀性铜箔的实验。 利用电子能谱(XPS)、X射线衍射(XRD)、扫描电子显微镜(SEM)等技术手段分析镀层质量。 在最佳工艺下获得非晶态Zn-Ni-P-La合金镀层,镀层表面平整均匀、结晶致密,未钝化的情况下,铜箔镀件在180 ℃烘箱中保持1 h不变色,表现出较理想的抗氧化和抗腐蚀能力。 表明镀层中适量的P和稀土La对改善镀层质量有着重要的作用,具有较好的工业应用前景。     

Electrochemical assessment of water|ionic liquid biphasic systems towards cesium extraction from nuclear waste

A room temperature ionic liquid (IL) composed of a quaternary alkylphosphonium (trihexyltetradecylphosphonium, P₆₆₆₁₄⁺) and tetrakis(pentafluorophenyl)borate anion (TB⁻) was employed within a water|P₆₆₆₁₄TB (w|P₆₆₆₁₄TB or w|IL) biphasic system to evaluate cesium ion extraction in comparison to that with a traditional water|organic solvent (w|o) combination. ¹³⁷Cs is a major contributor to the radioactivity of spent nuclear fuel as it leaves the reactor, and its extraction efficiency is therefore of considerable importance. The extraction was facilitated by the ligand octyl(phenyl)-N,N′-diisobutylcarbamoylphosphine oxide (CMPO) used in TRans-Uranium EXtraction processes and investigated through well established liquid|liquid electrochemistry. This study gave access to the metal ion to ligand (1:n) stoichiometry and overall complexation constant, β, of the interfacial complexation reaction which were determined to be 1:3 and 1.6 × 10¹¹ at the w|P₆₆₆₁₄TB interface while the study at w|o elicited an n equal to 1 with β equal to 86.5. Through a straightforward relationship, these complexation constant values were converted to distribution coefficients, δ_α, with the ligand concentrations studied for comparison to other studies present in the literature; the w|o and w|IL systems gave δ_α of 2 and 8.2 × 10⁷, respectively, indicating a higher overall extraction efficiency for the latter. For the w|o system, the metal ion-ligand stoichiometries were confirmed through isotopic distribution analysis of mass spectra obtained by the direct injection of an emulsified water–organic solvent mixture into an electron spray ionization mass spectrometer.     

废水中铜银的分离和银的回收研究

废水中铜银的分离和银的回收研究黄秀山（四川三峡学院化学系万县６３４０００）关键词分解电压，还原电势，回收一、引言本实验采用电解还原的方法回收贵金属银。目前此法主要用于回收废水中的铬、汞等，对银的研究很少。曾有人进行过自然渗析还原法回收银的研究。用自然...     

Plasma electrolytic oxidation coating on AZ91 magnesium alloy modified by neodymium and its corrosion resistance

Ceramic coatings on the surfaces of Mg-9Al-1Zn (AZ91) magnesium alloy and Mg-9Al-1Zn-1Nd magnesium alloy (AZ91 magnesium alloy modified by neodymium, named as AZ91Nd in this paper) are synthesized in aluminate electrolyte by plasma electrolytic oxidation (PEO) process, respectively. X-ray diffraction and X-ray photoelectron spectroscopy analyses show the PEO coating on the Mg-9Al-1Zn-1Nd alloy comprises not only MgO and Al₂O₃, which are found in the coating on the AZ91 alloy, but also a trace amount of Nd₂O₃. Microstructure observations indicate the addition of Nd can decrease the sizes of β phases and form Al₂Nd intermetallics in the AZ91 alloy. The fine β phases can effectively restrain the formation of unclosed-holes and greatly decrease the sizes of pores in the coating during the PEO process. In addition, the Al₂Nd intermetallics can be completely covered due to the lateral growth of the PEO coatings formed on the α and β phases. As a result, the coating on the AZ91Nd alloy possesses a dense microstructure compared with that on the AZ91 alloy. The following corrosion tests indicate the corrosion resistance of the PEO coating on the AZ91Nd alloy is evidently higher than that of the PEO coating on the AZ91 alloy.     

Growth characteristics of plasma electrolytic oxidation ceramic coatings on Ti-6Al-4V alloy

The aim of this work is to discuss the growth characteristics of the ceramic coatings on Ti alloy by plasma electrolytic oxidation (PEO) technique. Ceramic coatings were prepared on Ti alloy by plasma electrolytic oxidation in different electrolyte solutions under different pulse modes. The composition and the structure of the coatings were investigated by X-ray diffraction and scanning electron microscopy (SEM), respectively. The amount of the dissolved titanium into the electrolytes during PEO process was measured by inductively coupled plasma-atomic emission spectrometer (ICP-AES). The structure and the composition of the coatings were related to the mode of the spark discharge during PEO process. (a) Under the pulsed single-polar mode: In Na₃PO₄ solution, the spark discharge was mainly due to the breakdown of the oxide film, and the coatings prepared were porous and mainly structured by the Ti from the substrate. In K₄ZrF₆-H₃PO₄ and NaAlO₂-Na₃PO₄ solutions, the main mode of the spark discharge was the breakdown of the oxide film at the initial stage, and then changed into the breakdown of the vapor envelope, and the coatings were rough and thick, and mainly structured by the elements from the electrolyte. (b) Under the pulsed bi-polar mode in NaAlO₂-Na₃PO₄ solution, the spark discharge may be mainly due to the breakdown of the oxide film, the coatings prepared were dense in inner layer and loose in outer layer, and structured by the elements from both the substrate and the electrolyte. Besides, the ICP-AES analyses showed that the amount of the dissolved titanium in the electrolyte during PEO process was more under the breakdown of the oxide film than under the breakdown of the vapor envelope, which was consistent with the changes of the structure of the coatings. Cathode pulse in the pulsed bi-polar mode increased the amount of the dissolved titanium in the electrolyte, compared with the pulsed single-polar one.     

JONES型电导池测量的LCR电桥等效电路选择

JONES电导池系统的交流阻抗由电极过程的相关阻抗和电极间溶液的电阻两部分组成,可用适当的等效电路模拟。采用LCR电桥测量JONES电导池中溶液的电阻时需要选择合适的等效电路为模型解析测量的交流阻抗。通过等效电路的分析发现,选择串联电路作为LCR电桥的解析等效电路测量JONES型电导池中溶液的电阻时引入的误差比并联电路小。