Precise Conductance Measurements on Dilute Aqueous Solutions of Sodium and Potassium Hydrogenphosphate and Dihydrogenphosphate

Precise conductance measurements are reported on dilute aqueous solutions of the sodium and potassium salts of orthophosphoric acid at 25 ^∘C. Conductance measurements on solutions of electrolytes such as these phosphate salts that exist in solution as complicated mixtures of ions have previously proved difficult to interpret. To overcome this, a mathematical method has been developed to calculate the concentrations of all the species in the aqueous system M₃PO₄/M₂HPO₄/M₂HPO₄/H₃PO₄ (M = Na or K) over a continuous range of stoichiometries. The Lee–Wheaton conductance equation has been used to interpret the conductance of these multicomponent solutions in terms of the limiting ionic conductances and concentrations of all the ions in the solution. The limiting molar conductances of the ions H₂PO₄ ⁻ and HPO₄ ²⁻ and the ion-pair formation constants of these ions with sodium and potassium ions were determine This work has enabled the accurate determination of solution parameters for the important hydrogenphosphate ions in water and provides an excellent example of the use of an advanced conductance theory in the analysis of the conductance of multicomponent electrolyte systems.     

Methanol electrooxidation on platinum mesh electrodes bonded to solid polymer electrolytes

Methanol electrooxidation on smooth platinum electrodes bonded to solid polymer electrolytes was studied in water and acid solution by voltammetric measurements with different scanning rates. An enhancement of the oxidation rates was observed in these systems as compared to identical platinum electrodes in contact with liquid electrolytes. This electrocatalytic effect strongly depends on the measuring conditions and on the electrode potential. The reasons for the catalytic effects at different potentials are discussed. Received: 8 January 1997 / Accepted: 1 December 1997     

Fabrication of solid thin film electrolyte and LiCoO2 by aerosol flame pyrolysis deposition

Aerosol flame pyrolysis deposition method was applied to deposit the oxide glass electrolyte film and LiCoO₂ cathode for thin film type Li-ion secondary battery. The thicknesses of as-deposited porous LiCoO₂ and Li₂O–B₂O₃–P₂O₅ electrolyte film were about 6 μm and 15 μm, respectively. The deposited LiCoO₂ was sintered for 2 min at 700 °C to make partially densified cathode layer, and the deposited Li₂O–P₂O₅–B₂O₃ glass film completely densified by the sintering at 700 °C for 1 h. After solid state sintering process the thicknesses were reduced to approximately 4 μm and 6 μm, respectively. The cathode and electrolyte layers were deposited by continuous deposition process and integrated into a layer by co-sintering. It was demonstrated that Aerosol flame deposition is one of the good candidates for the fabrication of thin film battery.     

Formal Mathematical Analysis of the Existence of the Common Intersection Point in Relation to Determining the Parameters Describing Ion Adsorption at the Oxide/Electrolyte Interface: Comparison of the Triple and Four-Layer Models

For most oxide/electrolyte systems potentiometric titration curves measured for different ionic strengths have a Common Intersection Point (CIP) which corresponds to the Point of Zero Charge (PZC). However, there are systems where a CIP exists but the surface charge at this point does not equal zero (PZC CIP). In this paper theoretical analysis of the systems in which the PZC and CIP do not coincide is presented. It is based on the well-known 2-pK surface charging approach and Triple Layer Model (TLM) as well as the Four Layer Model (FLM) of the electric double layer. The appropriate mathematical criterion for CIP existence was applied with detailed derivations, both for TLM and FLM. Having determined in this manner the parameter values, one can draw proper conclusions about the features of oxide/electrolyte adsorption systems, in which PZC and CIP do not coincide. The values of adsorption parameters are found by fitting simultaneously the obtained theoretical expressions to both of the experimental titration isotherms, and to the individual isotherms of electrolyte cation adsorption measured using radiometric methods.     

Sm, Pr掺杂CeO2和CeMoO15基固体电解质的结构与性能

采用溶胶凝胶法制备了Sm和Pr掺杂的CeO2和CeMoO15基固体电解质, 通过X射线衍射(XRD)、拉曼光谱(Raman)、场发射扫描电镜(FE-SEM)等手段对氧化物结构进行了分析, 用交流阻抗谱测试了其电性能, 并比较了不同基体及其掺杂体系的结构与电性能. 结果表明, Ce6MoO15基掺杂体系的导电性能高于CeO2基掺杂体系; 元素Mo的加入使Ce6MoO15基材料的晶粒尺寸增大, 晶界相成分减少, 材料的晶界电导率增加, 600 ℃以下材料导电性能明显提高; Pr的掺入减小了材料的晶粒尺寸, 提高了材料的晶界电导率.     

Ce0.8Y0.2O1.9-Ca3(PO4)2-K3PO4复合电解质在中温区的质子导电性及在常压合成氨中的应用

A precursor of Ce_0.8Y_0.2O_1.9(YDC) solid electrolyte was synthesized by the gol-gel method. YDC and phosphates powders were prepared by mixing the YDC and phosphates according to different weight ratios. The mixtures of the YDC and binary phosphates were ground and sintered at 1 400 ℃. The proton conductivity in solid electrolyte of the sintered samples was examined using electrochemical methods at 400～800 ℃. Ammonia was synthesized from nitrogen and hydrogen at atmospheric pressure in the solid state proton conducting cell reactor. The optimal condition for the ammonia production was determined. The result indicated that composite electrolyte of 80wt% YDC: 20wt% binary phosphates as proton conductor could obtain the highest ionic conductivity and ammonia production rate among the four samples, the rate of evolution of ammonia was up to 9.5 × 10^-9 mol·s^-1·cm^-2.     

磺酸型聚氨酯离聚物的离子导电性能

本文以多种聚醚为软段，二异氰酸酯（ＭＤＩ和ＴＤＩ）为硬段，合成了多嵌段聚醚聚氨酯，以此聚氨酯为基材，与ＮａＨ及１，３－丙碳酸内酯反应，进一步合成了一系列不同离子化程度的阴离子型碳化聚氨酯离聚物，用交流阻抗谱仪测定了样品的阻抗谱，由此计算出样品的离子电导率。研究结果表明其他条件相同时，以聚乙二醇（ＰＥＧ）为软段的样品具有较高的离子电导率；以聚环氧丙烷（ＰＰＯ）为软段的样品次之，以聚四氢呋喃（ＰＴＭＯ）为软段的样品最低，对于离子化程度不同的聚氨酯离聚物以金属离子和烷氧单元之比为０．０５时导电性能最好。阳离子为Ｌｉ＋和Ｎａ＋的样品具有相近的离子电导率。     

TiO2/P(VdF-HFP)杂化纤维微孔膜的制备及其电化学性能

用电纺法制备了TiO₂/P(VdF-HFP)(聚偏氟乙烯-六氟丙烯共聚物)杂化纤维微孔膜, 用SEM观察了杂化纤维微孔膜的形貌, 并测算了这类由超细纤维相互搭接而形成的微孔膜的孔隙率. 这种微孔膜吸附LiPF₆/EC-DMC-EMC(碳酸乙烯酯-二甲基碳酸酯-碳酸甲乙酯)电解质溶液后得到凝胶聚合物电解质膜. 用电化学方法测试了聚合物电解质膜的离子电导率、锂离子迁移数等参数, 并研究了TiO₂纳米晶的掺入对聚合物电解质电化学性能的影响. 结果表明, TiO₂的掺入降低了P(VdF-HFP)聚合物基体的结晶度, 改善了凝胶聚合物电解质的低温电化学性能.     

Pre-irradiation induced grafting of styrene into crosslinked and non-crosslinked polytetrafluoroethylene films for polymer electrolyte fuel cell applications. II: Characterization of the styrene grafted films

Crosslinked and non-crosslinked polytetrafluoroethylene films (RX-PTFE and V-PTFE films, respectively) were irradiated by γ-ray and then grafted with styrene in liquid phase. Microscope FT-IR spectroscopy, TGA, solid state ¹³C CP/MAS and high resolution HS/MAS NMR spectroscopy, wide-angle X-ray diffraction (WAXD) study were used to get the structural information of the styrene grafted RX-PTFE and V-PTFE films. From microscope FT-IR spectra of the grafted RX-PTFE films, the “grafting front mechanism” was proved. TGA analysis showed that the grafted films have a small degradation step and two main degradation steps. In the ¹³C CP/MAS NMR spectra of the non-grafted films, there are no signal due to the absence of the hydrogen atom. While in the spectra of the grafted films, there are signals attributed to the polystyrene grafts. In the ¹³C HS/MAS NMR spectra of the grafted films, the relative intensity of the peaks attributed to the polystyrene grafts increased while the relative intensity of the peak attributed to PTFE matrix decreased with the increase in the DOG. From WAXD patterns, the intensity of the crystalline peak decrease with the increase in the DOG. The grafted films were sulfonated by chlorosulfonic acid and the results of highest IEC value exceeded 3.0. Those results will be reported in the near future.     

固体电解质La2-xCaxMo1.7W0.3O9-δ(0≤x≤0.2)的合成、表征及电性能

在氧离子导体La₂Mo_1.7W_0.3O₉的基础上，采用固相法合成了La位掺杂的Ca系列新型氧化物La_2-xCa_xMo_1.7W_0.3O_9-δ(0≤x≤0.2)。通过XRD、Raman和XPS等手段对化合物结构进行表征，交流阻抗谱测试其电性能。结果表明：掺杂离子Ca²⁺的半径小于基质离子La³⁺的半径导致晶格收缩；Ca的掺杂在La₂Mo_1.7W_0.3O₉自身内置氧空位的基础上增加了额外的氧空位，提高了氧离子导体的电导率，550 ℃电导率由0.79 × 10^-4 S·cm^-1 (x=0.0)增加到1.5 × 10^-4 S·cm^-1 (x=0.16，0.2)，电导率增加89.9%。