Interaction of bathocuproine with metals (Ca, Mg, Al, Ag, and Au) studied by density functional theory

Electronic structure of the interface between a bathocuproine (BCP) molecule and metal surface was studied by density functional theory. The bond energy of BCP with metal surface increased with decreasing work function of metals, that is, Au, Ag, Al, Mg, and Ca in this order. The charge transfer also increased with decreasing metal work function. It was analyzed that the Fermi level and the lowest unoccupied molecular orbital of BCP are composed of both BCP and metal orbital component, and electron transport properties across the BCP and metal is discussed based on these analyses.     

Effects of textured morphology on the short circuit current of single crystalline silicon solar cells: Evaluation of alkaline wet-texture processes

The effect of different surface morphologies obtained by anisotropic etching on the light trapping and short circuit current of single crystalline silicon solar cells was investigated. The anisotropic texturing of a (1 0 0) silicon surface was performed using potassium hydroxide (KOH) solution and/or tetramethylammonium hydroxide (TMAH) solution including isopropyl alcohol (IPA) additive or tertiary butyl alcohol (TBA) additive. Texturing in TMAH solution formed smaller pyramids on the textured surface compared with texturing in KOH solution. Although the textured samples showed similar reflectances (except in the case of the TBA additive), they showed different short circuit currents. Texturing in KOH/TMAH solution led to a 9.6% increase in short circuit current compared with texturing in KOH/IPA solution, a typical etchant in commercial processes. Based on these results, the reflectivity has no simple proportionality relationship to the short circuit current, and the short circuit current of silicon solar cells should be the criterion used in evaluating texturing effects on reducing reflectance and forming a sound junction with high collection efficiency.     

Stress Inhomogeneity in Powder Specimens Tested in the Jenike Shear Cell: Myth or Fact?

In the mechanical characterization of powders using the direct shear testers such as the Jenike shear cell, the existence of a uniform or well‐defined stress field in a powder specimen is assumed. This assumption has not been subjected to any serious scrutiny in the literature. In this study, the normal stress variation in a silica powder was locally determined by locating a pressure‐sensitive TekScan pad at the bottom section of a Jenike shear cell. A computer simulation of the consolidation and pre‐shearing stages of the Jenike test procedure was performed using the Discrete Element Method (DEM). The paper presents both experimental and computational evidence for the existence of a complex stress field in the powder specimen, thus clearly invalidating the long‐standing stress homogeneity assumption in the direct shear testing of powders. The implications of the stress inhomogeneity in terms of the accuracy of the material properties extracted from the Jenike test are also presented.     

Spherophylon,the concept of life at a level higher than that of the individual

A new term, spherophylon, indicates a unit of life higher than the individual level. To define this term, critical notes are given on the meaning of age in terms of life, the interrelationships among the elements of biodiversity, and an analogy of development between the multicellular body of an individual and the spherophylon. Life is compared at various levels; at the level of the cell, the individual as a multicellular organism, and the spherophylon. The biology of the spherophylon is discussed in the context of integrative biology.     

Assessment of conservative weighting scheme in simulating chemical vapour deposition with trace species

Low‐pressure or ultra‐high vacuum chemical vapour deposition often involves important trace species in both gas‐phase and surface reactions. The conservative weighting scheme (J. Thermophys. Heat Transfer 1996; 10 (4) : 579) has been used to deal with the trace species often involved in some non‐reactive physical processes, which is otherwise considered computationally impossible using the conventional DSMC method. This conservative weighting scheme (CWS) improves greatly the statistical uncertainties by decreasing the weighting factors of trace‐species particles and ensures the conservation of both momentum and energy between two colliding particles with large difference of weighting factors. This CWS is further extended to treat reactive processes for gas‐phase and surface reactions with trace species, which is called extended conservative weighting scheme (ECWS). A single‐cell equilibrium simulation is performed for verifying both the CWS and ECWS in treating trace species. The results of using CWS show that it is most efficient and accurate for weight ratio (trace to non‐trace) equal to or less than 0.01 for flows with two and three species. The results of a single‐cell simulation using ECWS for gas‐phase reaction and surface reactions show that only ECWS can produce acceptable results with reasonable computational time. Copyright © 2003 John Wiley & Sons, Ltd.     

双功能化合物-二氯荧光素二丙烯酸酯的合成与生物活性

荧光素主要用于生物细胞染色。本文合成了二氯荧光素二丙烯酸酯,并用元素分析,核磁共振,红外、紫外、荧光光谱进行表征,考察发现它对人体外培养肿瘤细胞L1210有很强的瞬时杀伤作用;对人体胃腺癌(SGC 7901)细胞增殖有很强的抑制作用;并可用于鉴定蚕豆花粉细胞的生活力和生活状态。1　实验部分1 1　试剂与仪器荧光素(上海医药化工试剂采购供应站)、丙烯酸、氯化亚砜(A R)。细胞由中科院上海药物研究所提供。意大利1106型元素分析仪,NICOLETFT IR170SX型IR仪(KBr压片),FT Ac80型核磁共振仪,KOFLER熔点仪(温度计未校正)。1 2　…     

Influence of chemical composition and sequence length on the transport properties of proton exchange membranes

One of the integral parts of the fuel cell is the proton exchange membrane. Our research group has been engaged in the past few years in the synthesis of several sulfonated poly(arylene ether) random copolymers. The copolymers were varied in both the bisphenol structure as well as in the functional groups in the backbone such as sulfone and ketones. To compare the effect of sequence length, multiblock copolymers based on poly(arylene ether sulfone)s were synthesized. This paper aims to describe our investigation of the effect of chemical composition, morphology, and ion exchange capacity (IEC) on the transport properties of proton conducting membranes. The key properties examined were proton conductivity, methanol permeability, and water self diffusion coefficient in the membranes. It was observed that under fully hydrated conditions, proton conductivity for both random and block copolymers was a function of IEC and water uptake. However, under partially hydrated conditions, the block copolymers showed improved proton conductivity over the random copolymers. The proton conductivity for the block copolymer series was found to increase with increasing block lengths under partially hydrated conditions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2226–2239, 2006     

Preparation of solid alkaline fuel cell binders based on fluorinated poly(diallyldimethylammonium chloride)s [poly(DADMAC)] or poly(chlorotrifluoroethylene‐co‐DADMAC) copolymers

A membrane or an electrode binder to be used in a solid alkaline fuel cell (SAFC) needs to (i) be insoluble in both aqueous solutions and the required fuels, and (ii) exhibit an hydroxide ion conductivity. To achieve these goals, two pathways were employed: (i) one consists of the radical copolymerization of diallyldimethylammonium chloride (DADMAC) with chlorotrifluoroethylene (CTFE) while (ii) the other one is based on the counter‐ion exchange of a poly(DADMAC) by fluorinated anions. First, the radical copolymerization of CTFE with DADMAC under various experimental conditions was achieved in yields up to 85%, and DADMAC percentages in the copolymers were higher than those in the feed compositions. To obtain insoluble copolymers, high CTFE feed contents (>70 mol %) were required. The other route consisting in the partial replacement of the Cl^? counter‐ions in the water‐soluble poly(DADMAC) by bistrifluoromethanesulfonimide (TFSI^?) did confer the starting material insolubility in water while maintaining its conductivity. When the fluorinated poly(DADMAC) was obtained from concentrated solutions of fluorinated surfactant, it was observed that the amount of counter‐ions exchanged was difficult to control, which limits optimization. Nevertheless, under diluted conditions, membranes with ion exchange capacity up to 0.7 meq g^?1, and conductivities close to 1 mS cm^?1 were obtained. Although their conductivities were low, these membranes fulfill the requirements for a SAFC membrane in terms of solubility in DMSO, water insolubility, and thermal stability (T_d,10% > 320 °C). When used in a fuel cell, as a binder in the membrane‐electrode assembly (MEA), significant improvements were noted (+50% of the open circuit voltage, +580% in current density, and +540% in accessible power). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2043–2058, 2009     

Effect of acidification treatment and morphological stability of sulfonated poly(arylene ether sulfone) copolymer proton‐exchange membranes for fuel‐cell use above 100 °C

Directly copolymerized wholly aromatic sulfonated poly(arylene ether sulfone) copolymers derived from 4,4′‐biphenol, 4,4′‐dichlorodiphenyl sulfone, 3,3′‐disulfonated, and 4,4′‐dichlorodiphenyl sulfone (BPSH) were evaluated as proton‐exchange membranes for elevated temperature operation (100–140 °C). Acidification of the copolymer from the sulfonated form after the nucleophilic step (condensation) copolymerization involved either immersing the solvent‐cast membrane in sulfuric acid at 30 °C for 24 h and washing with water at 30 °C for 24 h (method 1) or immersion in sulfuric acid at 100 °C for 2 h followed by similar water treatment at 100 °C for 2 h (method 2). The fully hydrated BPSH membranes treated by method 2 exhibited higher proton conductivity, greater water absorption, and less temperature dependence on proton conductivity as compared with the membranes acidified at 30 °C. In contrast, the conductivity and water absorption of a control perfluorosulfonic acid copolymer (Nafion 1135) were invariant with treatment temperature; however, the conductivity of the Nafion membranes at elevated temperature was strongly dependent on heating rate or temperature. Tapping‐mode atomic force microscope results demonstrated that all of the membranes exposed to high‐temperature conditions underwent an irreversible change of the ionic domain microstructure, the extent of which depended on the concentration of sulfonic acid sites in the BPSH system. The effect of aging membranes based on BPSH and Nafion at elevated temperature on proton conductivity is also discussed. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2816–2828, 2003     

Electrochemical Arylation of N-Containing Chelate and Macrocyclic Complexes of Transition Metals with the Aid of Diphenyliodonium Salts

A new method of electrochemical arylation of complexes of transition metals (Fe, Co, Ni) with N-containing chelate and macrocyclic (dimethylglyoximate, porphyrin, etc.) ligands employs diphenyliodonium salts as arylating agents and permits the synthesis of compounds containing functional groups that are easily reduceable or sensitive to the action of organometallic compounds. A homogeneous redox catalysis (mediator 1,5-dinitroanthraquinone-9,10) reduces the reaction potential to –0.45 V (Ag/AgCl/KCl), thus substantially decreasing the contribution of side processes.