特种合金钢系列标准物质研制

介绍了特种合金钢系列标准物质的研制过程。采用合理的冶炼锻轧工艺,选取不同部位的样品进行均匀性检验,确定了15种元素的认定值及扩展不确定度,并进行了线性、一致性考察以及与国内外同类标准物质的比对。结果表明,本套特种合金钢系列标准物质的均匀性良好,定值准确且有良好的梯度分布。     

疏水型纳米TiO_2膜的制备、表征及耐蚀性能研究

以乙酰乙酸乙酯(EAcAc)作稳定剂和阻聚剂制备超微TiO2溶胶,用提拉法在AISI316L不锈钢上构筑一层纳米TiO2膜,经水热后处理有效消除膜中的龟裂现象,经氟硅烷基化制备成疏水型纳米TiO2膜.用胶粒分布仪测定溶胶颗粒分布,接触角测试仪测定表面疏水性、XRD、SEM表征膜的形貌、结构,电化学线性极化法测定疏水型纳米TiO2膜在模拟体液(Ringer溶液)中的电化学行为.结果表明:TiO2膜呈多孔有序纳米膜,颗粒分布均匀,粒径约为15～18nm,厚度约375nm,TiO2为锐钛矿型,疏水型纳米膜可使不锈钢腐蚀电流降低3个数量级,其耐腐蚀性大幅度提高.     

光谱法研究钢铁表面彩色Mo-S-Fe簇合物膜

研究MoS4^2-在钢铁表面发生配位反应形成的具有装饰效果的多种彩色Mo-S-Fe簇合物膜。FT-IR、F-IR、FT-Raman、XPS和AES分析表明,簇合物膜以Fe(Ⅲ)、Mo(Ⅵ)状态存在,膜内层以Fe(Ⅱ)、Mo(Ⅳ)和Mo(Ⅵ)共存,S和O都-2价,膜表面含少量 4、 6价硫。从AES深度分布曲线的组成恒定区求得各组成元素的相对原子百分比浓度和膜层厚度,反应时间越长,膜越厚,膜为多分子层结构。加热后膜层所含元素种类及价态不变,但元素分布有所改变。     

The effect of H2S concentration on the corrosion behavior of API 5L X-70 steel

This work presents electrochemical data measured during the corrosion of API 5L X-70 pipeline steel immersed in aqueous environments containing dissolved H₂S. Three different electrolyte were used: a 3 wt% NaCl solution containing 100, 650 and 2,550 ppm of H₂S respectively. The corrosion of steel is described by means of electrochemical impedance spectroscopy. The electrochemical data obtained from the steel monitoring are presented in terms of Nyquist plots. The influence of the total H₂S concentration as well as the effect of temperature on the corrosion of API 5L X-70 steel were also studied. In the presence of H₂S the R_ct values decrease as the H₂S concentration increases.     

氯化2,3,5-三苯基-2 氢-四唑(TTC)及2,4,6-三(2-吡啶基)-s -三嗪(TPT)在1mol/L HCl 中对Q235碳钢的缓蚀作用及机理的研究(Ⅱ)

通过X射线光电子能谱(XPS)、椭圆偏振原位测试考察了氯化2,3,5-三苯基-2H-四唑(TTC), 2,4,6-三(2-吡啶基)-s-三嗪(TPT)分子在1 mol/L HCl中对碳钢表面的缓蚀作用, 并从微观上对二者的缓蚀机理进行探讨. XPS测试结果显示, 由C, N元素的1s特征峰产生的化学位移及其积分峰面积表明TTC, TPT分子在金属表面产生了有效抑制腐蚀的保护层; 由椭圆偏振原位测试并结合动电位极化曲线测试,考察了TTC, TPT分子对金属表面腐蚀反应的抑制程度, 并得到了相位差等参量, 结果表明二者在金属表面形成了具有缓蚀作用的覆盖层.     

Effects of synthesis parameters on the microstructure and phase structure of porous 316L stainless steel supported TiO2 membranes

Porous stainless steel (PSS) supported TiO₂ membrane was synthesized from colloidal TiO₂ sol by the sol–gel technique. Morphology and phase structure of the obtained membranes were regulated through optimizing the synthesis parameters including organic binders, aging periods of the parent sol and concentrations of the casting solutions as well as the sintering temperatures. Polyvinyl alcohol (PVA) 1750 was found to be feasible to fabricate TiO₂ membrane with relatively flat surface and homogeneous morphology without crack. The aging period of the parent sol, which was revealed to be very important to the morphology of the particles deposited in the membranes on PSS, was decided to be 24 h. The concentration, under which the membranes could avoid macro-pores and have a uniform thickness of approximately 8 μm, was regulated to 0.0036 mol/l. Besides, a homogeneous microstructure with grain sizes of 0.08–0.2 μm was obtained in the membrane with a pure rutile phase when sintered at 850 °C. The obtained PSS supported TiO₂ membrane with homogeneous microstructure and rutile phase may be very promising for practical applications.     

Effect of temperature on CO2 corrosion of carbon steel

This work investigates the effect of temperature on the corrosion product layer of carbon steel exposed to a CO₂‐containing solution. The measurement techniques, such as scanning electron microscopy with energy dispersive spectrometry, X‐ray diffraction, and X‐ray photoelectron spectroscopy, were used to systematically characterize the morphology and composition of the corrosion product layer. The corrosion rates were calculated by weight loss method. The corrosion mechanisms as a function of temperature are studied and discussed. The results showed that temperature is an important factor in the corrosion rate of carbon steel. Copyright © 2009 John Wiley & Sons, Ltd.     

铈和镧对Q345B钢在海洋大气中腐蚀行为的影响

通过周浸实验对普通Q345B钢和含有微量稀土铈(Ce)和镧(La)的Q345 BRE钢在模拟海洋大气腐蚀环境下,进行了耐腐蚀性能比较.利用失重和电化学方法进行两者的腐蚀速率比较,利用SEM和XRD分析了两者腐蚀形貌和锈层的特征.结果表明:加入混合稀土铈和镧的Q345B钢的腐蚀速率小于普通的Q345B钢,且腐蚀形貌也发生...     

T形型钢混凝土柱正截面承载力的计算方法探讨

在总结了型钢混凝土(SRC)柱承载力计算一般方法的基础上,针对T形型钢混凝土柱, 结合中国现行规范,分析了此种柱的受力特点和破坏模式,提出T形型钢混凝土柱正截面极 限承载力的计算方法,并采用该方法对一T形型钢混凝土柱的承载力进行验算. 结果表明与 试验数据吻合较好,说明本文方法具有较好的精确度和适用性.     

轧辊用高钒高速钢的滚-滑动磨损性能及失效行为研究

在高应力滚-滑动(滑动率约10%)条件下,利用自制的磨损试验机研究了高钒高速钢的磨损性能,并利用电子显微镜分析了失效行为.结果表明:高钒高速钢的相对耐磨性是高铬铸铁(Cr20)的2倍以上.磨损失效形式为显微切削与疲劳剥落的复合,兼有碳化物碎裂.碳化物对磨损失效有重要作用,高铬铸铁中的杆状M7C3型碳化物易于弯曲、碎裂而在其内部形成大量裂纹,促进磨损表面产生大块的疲劳剥落;高钒高速钢中团块状VC硬度高、形态好、具有精细亚结构、不易碎裂,可有效地抵御显微切削和疲劳剥落,是高钒高速钢耐磨性优良的原因.