STUDIES ON RESPONSE CHARACTERISTICS OF DRUG ISE''''S (Ⅳ) SELECTIVITY OF, DRUG ISE''''S WITH HETERO-POLY ACID ANION SITE TOWARD METAL IONS

The relationship between the selectivity of six drug ion-selective electrodes with anionic species of hetero-poly acid as exchange site and the structural and thermodynamical parameters of the metal ion has been investigated experimentally and theoretically. The electrode selectivity is controlled mainly by the extractibility or hydrophobicity of the metal ion, but not by the ion-association-complex formation process. Linear relationship exists between the pK_(ij) value and the structural parameter z~2/(r + 0.85) and the thermodynamic parameter of hydration (△G_h) of the metal ion. Better correlation is obtained for the pK_(ij)vs. (z~2/r)~(-k) relationship.     

非水体系中哌啶在银电极表面的表面增强喇曼散射

本文测定了哌啶在甲醇溶液中吸附在银电极表面的表面增强喇曼散射(SERS)光谱,及其随电位的变化,同时还测定了电极经不同氧化-还原循环(ORC)预处理时的SERS谱,对所得结果进行了分析比较,并进一步研究了非水体系和水体系SERS谱之间的关系.实验结果表明:哌啶在甲醇体系中比在水体系中SERS谱的增强因子要小,并且它们的SERS谱线随电位的变化也有一定的差别.     

The electrochemical behaviour of the altenuene mycotoxin and its acidic properties

The electrooxidation of altenuene (ALT), one of the mycotoxins of the Alternaria alternata genus, on a glassy carbon disk electrode is studied for the first time by using cyclic and square wave voltammetry. From the electrochemical responses, a complex reaction mechanism could be inferred. Values of 1.06×10⁻⁵ cm² s⁻¹, 1.116 V and 2 were determined for the diffusion coefficient, the apparent formal potential and the electron number, respectively, for the overall electrode process by convolution analysis of linear scan voltammograms. Square wave voltammetry was used to generate I_p versus c_ALT* calibration curves for this fungal metabolite. A detection limit of 4.0×10⁻⁷ M was determined for a 2:1 signal to noise ratio. The acid dissociation constant for ALT was determined from conventional UV–vis spectrophotometric measurements. Experimental variations of absorbance as a function of pH at a given wavelength were fitted by using the exact equation that describes the system. Good agreement between the experimental absorbance versus pH plots and the curves generated by the fitting process was found.     

MEA with double-layered catalyst cathode to mitigate methanol crossover in DMFC

Methanol permeation is one of the key problems for direct methanol fuel cell (DMFC) applications. It is necessary to change the structure of the cathode of membrane electrode assembly (MEA). Therefore, a novel MEA with double-layered catalyst cathode was prepared in this paper. The double-layered catalyst consists of PtRu black as inner catalyst layer and Pt black as outer catalyst layer. The inner catalyst layer is prepared for oxidation of the methanol permeated from anode. The results indicate that this double-layered catalyst reduced the effects of methanol crossover and assimilated mixed potential losses. The performance of MEA with double-layered catalyst cathode was 52.2 mW cm⁻², which was a remarkable improvement compared with the performance of MEA with traditional cathode. The key factor responsible for the improved performance is the optimization of the electrode structure.     

Laser generation of narrow-band and directed ultrasound

An aluminium hemicylindrical sample has been irradiated with an array of laser lines, with each line acting as a source of acoustic waves. Detection of the generated ultrasonic waves was performed using both a wide-band stabilized Michelson interferometer and a 20 MHz piezoelectric transducer. Experimental and theoretical results are presented which reveal that the use of a spatially modulated laser source produces significant narrow-banding of the detected ultrasound, compared with a single point or single line source case. Additionally, for a given line spacing, ultrasound of a particular frequency can be directed. Owing to the nature of the acoustic signals generated by each individual array element, superposition of several signals does not result in any energy directivity similar to that encountered in phase electromagnetic array antennas. While time or frequency feature enhancement may be obtained in a desired direction, in most cases the far field energy directivity pattern is simply the incoherent sum of the energy directivity of each array element.     

Biosensor for peptide determination constructed by immobilizing proteolytic enzymes on coated-wire electrodes

A biosensor for peptide determination was constructed with trypsin or α-chymotrypsin immobilized on hydrogen ion-selective coated-wire electrode and its fundamental properties were investigated with two artificial peptides. The substrates could be determined in the range 0.1–40 mM with response times of 5–10 min. The effects of pH and concentration of buffer solution on the determination were investigated.     

Lamb wave sensors array for nonviscous liquid sensing

The interdigital transducer (IDT) can excite Lamb wave in a piezoelectric plate loading with a liquid layer, and the phase velocity of Lamb wave is associated with the properties of the liquid layer. In this paper, the concept of effective permittivity is introduced to study the Lamb wave’s potential application in liquid sensing. Considering the measuring of ideal nonviscous liquid, the sensors array is designed to sense the density and the dielectric constant of the liquid layer simultaneously. Using LiNbO₃ as piezoelectric material, in order to improve the sensors array sensitivity and the electro-mechanical coupling coefficient, the optimized results including plate thicknesses and cut orientations are presented by numerical simulation. These studies show that the Lamb wave sensors array can be potential in liquid sensing.     

Methanol vapor‐induced morphology and current–voltage characteristic changes in a cast‐coated nafion film/interdigitated microarray electrode

Methanol vapor‐induced membranous changes in a cast‐coated Nafion thin film were studied through current–voltage (I–V) characteristics with an interdigitated microarray (IDA) electrode and atomic force microscopy (AFM). The obtained I–V curves showed that the as‐prepared Nafion film was stable under humidified nitrogen gas; however, the I–V profile dramatically changed with exposure to methanol vapor. Next, the morphology of the film was compared before and after methanol exposure with AFM images. On the basis of our observations, we found that the as‐prepared film had an irregularly complicated microstructure, whereas the structure became homogeneous in appearance after 30 min of exposure to methanol gas. The alternating‐current conductivity data, showing almost the same magnitude before and after exposure, strongly suggested that the I–V profile shift was based on a change in an electrode reaction mechanism induced by a change in the junction at the Nafion/IDA electrode interface. Furthermore, the methanol vapor‐pre‐exposed Nafion was stable for further exposure to methanol vapor, water vapor, or both. With the stabilized film used in combination with the IDA electrode, a reversible change in the magnitude of the current was observed when the methanol/water vapor ratio was varied. This indicated that the electrode reaction had good reproducibility after the treatment. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1103–1109, 2002     

圆内零级亚纯函数的充满圆及应用

本文研究了圆内零级亚纯函数的充满圆序列,获得了在关于型函数的Borel点附近存在充满圆序列,从而得到了Hayman点的存在性.     

Platinum particles dispersed poly(diphenylamine) modified electrode for methanol oxidation

A modified potentiostatic method, termed the ‘pulse pontentiostatic method’ (PPSM) was used to get nano fibrillar poly(diphenylamine) (PDPA) film on Indium tin oxide (ITO) coated glass electrode and also for making modified electrode with platinum particles dispersed in PDPA. Platinum clusters were electrodispersed under constant potential on PDPA films to obtain catalytic electrodes for methanol oxidation. Energy dispersive analysis of X-rays (EDAX) results showed that the Pt microparticles are deposited into PDPA film. Scanning electron micrograph, SEM images show that the deposition results spherical catalytic particles. X-ray photoelectron spectroscopy (XPS) results inform that the net electronic charge on carbon atom and also the imine/amine ratio was not affected by Pt loadings. The modification of electrode surface by nano fibular PDPA improves the electrocatalytic activity for methanol oxidation.