The variational Lyapunov function and strict stability theory for differential systems

In this paper, we investigate strict stability of differential systems by variational Lyapunov function. We obtain some sufficient conditions and comparison theorems.     

基于线性耦合下混沌系统的同步条件

将混沌同步问题用精确的数学语言给予描述，通过数学分析将其转化为微分方程组的稳定性问题.以Lorenz系统族的Chen氏系统作为典型系统，在线性耦合下分析系统参数，得到了系统达到同步时的充分条件，且在理论上加以证明.结合该条件，提出了一种确定耦合系数的方法.最后用仿真实验验证了该方法的正确性，并验证了在不同耦合方式和参考系统的情况下定理的有效性. 关键词： 混沌同步 耦合 稳定性     

Existence and Nonlinear Stability of Stationary States of the Schrödinger–Poisson System

We consider the Schrödinger–Poisson system in the repulsive (plasma physics) Coulomb case. Given a stationary state from a certain class we prove its nonlinear stability, using an appropriately defined energy-Casimir functional as Lyapunov function. To obtain such states we start with a given Casimir functional and construct a new functional which is in some sense dual to the corresponding energy-Casimir functional. This dual functional has a unique maximizer which is a stationary state of the Schrödinger–Poisson system and lies in the stability class. The stationary states are parameterized by the equation of state, giving the occupation probabilities of the quantum states as a strictly decreasing function of their energy levels.     

Noise-induced asymptotic periodicity in a piecewise linear map

We examine asymptotically periodic density evolution in one-dimensional maps perturbed by noise, associating the macroscopic state of these dynamical systems with a phase space density. For asymptotically periodic systems density evolution becomes periodic in time, as do some macroscopic properties calculated from them. The general formalism of asymptotic periodicity is examined and used to calculate time correlations along trajectories of these maps as well as their limiting conditional entropy. The time correlation is shown to naturally decouple into periodic and stochastic components. Finally, asymptotic periodicity is studied in a noise-perturbed piecewise linear map, focusing on how the variation of noise amplitude can cause a transition from asymptotic periodicity to asymptotic stability in the density evolution of this system.     

热力膨胀阀在空气源热泵热水器系统中稳定特性的实验研究

本文对热力膨胀阀在空气源热泵热水器的稳定特性进行了实验研究.通过不同热力膨胀阀开度下的实验数据,分析了热力膨胀阀在系统中的稳定特性.分析了热力膨胀阀在空气源热泵热水器全年运行工况中存在的局限性.提出保证系统稳定运行的方法与建议;指出制冷剂充注量是系统稳定运行的另一个重要因素,只有同时很好地把握住热力膨胀阀开度和制冷剂充注量,才可能使系统运行在最佳工况.     

Strict Stability of Impulsive Differential Equations

In this paper, we will extend the strict stability to impulsive differential equations. By using Lyapunov functions, we will get some criteria for the strict stability of impulsive differential equations, and we can see that impulses do contribute to the system＇s strict stability behavior. An example is also given in this paper to illustrate the efficiency of the obtained results.     

Thermal stability of shear-induced precursor structures in isotactic polypropylene by rheo-X-ray techniques with couette flow geometry

Combined in situ rheo-SAXS (small-angle X-ray scattering) and -WAXD (wide-angle X-ray diffraction) studies using couette flow geometry were carried out to probe thermal stabilty of shear-induced oriented precursor structure in isotactic polypropylene (iPP) at around its normal melting point (162 °C). Although SAXS results corroborated the emerging consensus about the formation of “long-living” metastable mesomorphic precursor structures in sheared iPP melts, these are the first quantitative measures of the limiting temperature at which no oriented structures survive. At the applied shear, rate = 60 s⁻¹ and duration t_s = 5 s, the oriented iPP structures survived a temperature of 185 °C for 1 h after shear, while no stable structures were detected at and above 195 °C. Following Keller's concepts of chain orientation in flow, it is proposed that the chains with highly oriented high molecular weight fraction are primarily responsible for their stability at high temperatures. Furthermore, the effects of flow condition, specifically the shear temperature, on the distributions of oriented and unoriented crystals were determined from rheo-WAXD results. As expected, at a constant flow intensity (i.e., rate = 30 s⁻¹ and duration, t_s = 5 s), the oriented crystal fraction decreased with the increase in temperature above 155 °C, below which the oriented fraction decreased with the decrease in temperature. As a result, a crystallinty “phase” diagram, i.e., temperature versus crystal fraction ratio, exhibited a peculiar “hourglass” shape, similar to that found in many two-phase polymer–polymer blends. This can be explained by the competition between the oriented and unoriented crystals in the available crystallizable species. Below the shear temperature (155 °C), the unoriented crystals crystallized so rapidly that they overwhelmed the crystallization of the oriented crystals, thus depleting a major portion of the crystallizable species and increasing their contribution in the final total crystalline phase. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3553–3570, 2006     

Chemically modified proton‐conducting membranes based on sulfonated polyimides: Improved water stability and fuel‐cell performance

A series of branched/crosslinked sulfonated polyimide (B/C‐SPI) membranes were prepared and evaluated as proton‐conducting ionomers based on the new concept of in situ crosslinking from sulfonated polyimide (SPI) oligomers and triamine monomers. Chemical branching and crosslinking in SPI oligomers with 1,3,5‐tris(4‐aminophenoxy)benzene as a crosslinker gave the polymer membranes very good water stability and mechanical properties under an accelerated aging treatment in water at 130 °C, despite their high ion‐exchange capacity (2.2–2.6 mequiv g^?1). The resulting polymer electrolytes displayed high proton conductivities of 0.2–0.3 S cm^?1 at 120 °C in water and reasonably high conductivities of 0.02–0.03 S cm^?1 at 50% relative humidity. In a single H₂/O₂ fuel‐cell system at 90 °C, they exhibited high fuel‐cell performances comparable to those of Nafion 112. The B/C‐SPI membranes also displayed good performances in a direct methanol fuel cell with methanol concentrations as high as 50 wt % that were superior to those of Nafion 112. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3751–3762, 2006     

Synthesis and properties of poly(amic acid)s and polyimides based on 2,2′,6,6′‐biphenyltetracarboxylic dianhydride

Poly(amic acid)s (PAAs) having the high solution stability and transmittance at 365 nm for photosensitive polyimides have been developed. PAAs with a twisted conformation in the main chains were prepared from 2,2′,6,6′‐biphenyltetracarboxylic dianhydride (2,2′,6,6′‐BPDA) and aromatic diamines. Imidization of PAAs was achieved by chemical treatment using trifluoroacetic anhydride. Among them, the PAA derived from 2,2′,6,6′‐BPDA and 4,4′‐(1,3‐phenylenedioxy)dianiline was converted to the polyimide by thermal treatment. The heating at 300 °C under nitrogen did not complete thermal imidization of PAAs having glass‐transition temperatures (T_g)s higher than 300 °C to the corresponding PIs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6385–6393, 2006     

Numerical simulation of critical dependences for symmetric two-layered Josephson junctions

Partial critical dependences of the form current-magnetic field in a two-layered symmetric Josephson junction are modeled. A numerical experiment shows that, for the zero interaction coefficient between the layers of the junction, jumps of the critical currents corresponding to different distributions of the magnetic fluxes in the layers may appear on the critical curves. This fact allows a mathematical interpretation of the results of some recent experimental results for two-layered junctions as a consequence of discontinuities of partial critical curves.