利用电化学微分质谱在燃料电池的阴极研究碳载体的氧化

利用电化学微分质谱,在双薄层流动电解池中,通过检测二氧化碳产物的信号研究氧气与铂纳米粒子对碳载体氧化机理与动力学的影响．研究发现,碳载体可以在不同的电位区间内被氧化;氧气可以加速碳的氧化,在相同的电位下碳氧化生成二氧化碳产物的速率在氧气饱和溶液中是在氮气饱和溶液中的两倍;铂纳米粒子可以催化碳的氧化,在碳电极上,担载的铂纳米粒子可以大大降低碳氧化的过电势．讨论了铂与氧气促进碳氧化的机理．     

阵列波导光栅解调的准分布式光纤光栅传感器

从理论上和实验上研究了一种操作简单、响应速度快,价格低廉和高分辨率的基于阵列波导光栅(AWG)的准分布式光纤布拉格光栅(FBG)传感器.该传感系统采用了阵列波导光栅双通道强度解调技术对光纤光栅的布拉格波长和温度进行精确的解调.实验结果表明,该系统对宽带宽光纤光栅的布拉格波长和温度解调均具有高线性度,考虑系统稳定性及光纤布拉格光栅之间的串扰影响,波长测量精度仍可达2 pm,温度测量精度优于0.2℃.     

Controllable Preparation of Nanosized LiMnPO4/C with Rod-Like Morphology by Hydrothermal Method with Excellent Electrochemical Performance

The nanosized rod-like LiMnPO₄/C cathode materials have successfully in situ synthesized on the surface of flaky structure MnPO₄ · H₂O self-sacrificing template by the hydrothermal method. The crystal microstructure, micro shape, and electrochemical parameters of LiMnPO₄/C are comprehensively studied by XRD, SEM, TEM, and electrochemical measurement methods. The physical and chemical properties analysis confirms that the vinyl acetate solution (VAc-H₂O) with a proper molar ratio is beneficial to generate orthorhombic olivine structure LiMnPO₄ with microporous structure and nanorod-shaped morphology. The electrochemical measurement results indicate that LMP-X1-AA sample delivers an initial discharge capacity of 148.1 mAh g⁻¹ at 0.05 C, the capacity retention rate still maintains at 89.2% after 200 cycles. As the discharge rate increases to 1 C, the discharge capacity still remains at 133.4 mAh g⁻¹. The results indicate that the synergistic effect of nanosized rod-like morphology and conductive carbon coating is beneficial to improving the lithium ions diffusivity and electrochemical properties of LiMnPO₄ materials.     

稀土元素对Ti0.26Zr0.07V0.24Mn0.1Ni0.33贮氢合金微观结构和电化学性能的影响

本文研究了稀土元素对Ti0.26Zr0.07V0.24Mn0.1Ni0.33合金的微观结构和电化学性能的影响。结果表明,Ti0.26Zr0.07V0.24-xMn0.10Ni0.33REx(RE=Ce,Nd,Gd;x=0.01)合金均有V基固溶体相和C14型Laves相两相组成。合金中两相的晶格参数随加入稀土元素的不同而发生变化。稀土元素部分取代可改善合金电极的活化性能。然而,对合金电极的其他性能影响因元素种类不同而各异。Ce取代增大了合金电极的最大放电容量,Nd元素可以有效改善合金的高倍率放电性能。工作温度对合金电极的放电容量影响较大,Nd和Gd在333 K最大放电容量可达426和465 mAh.g-1。过高的温度使其循环容量衰减加剧。     

Novel materials for bioanalytical and biomedical applications: Environmental response and binding/release capabilities of amphiphilic hydrogels with shape‐persistent dendritic junctions

The binding and release capabilities of a hydrogel series, constructed of hydrophilic poly(ethylene glycol) segments and hydrophobic dendritic junctions [poly (benzyl ether)s], are evaluated in aqueous media. The environmental response of the amphiphilic networks is also tested in water at three pH values: 1.5, 7.0, and 10.1. The highest swelling ratio is observed under acidic conditions and varies between 3.7 and 6.5, depending on the crosslinking density and dendrimer generation. Gel specimens with embedded indicators react within 3–6 s with a clear color switch to the change in the pH of the surrounding medium. The experiments with model anionic and cationic indicators and stains show that the hydrogels have basic interiors. The gel binding capabilities depend on the water solubility of the substrate and on the size of the incorporated dendritic fragments. Model release studies have been performed at 37 °C and pHs 1.5, 7.0, and 10.1. The observed phenomena are explained by the transformations in the structure and charge that both the networks and the model compounds undergo with the changes in the pH of the aqueous medium. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4017–4029, 2005     

Molecular Composites Comprising Rodlike Polyamides and Vinyl Polymers

Abstract

At present we have strong evidence that several members of a series of wholly-aromatic, para-linked, rodlike polyamides, polyesters, and polyesteramides form molecular composites with certain flexible-chain, thermoplastic polymers over a wide range of compositions. This paper reports on the initial results of an investigation of intermolecular interactions using spectroscopy and various scattering techniques as well as characterization of some of the mechanical and optical properties of these materials. The composites are made by two techniques: 1) photo-polymerization of a homogeneous solution of a rodlike polymer in a monomer containing a photoinitiation; 2) solvent evaporation from homogeneous solutions of very limited combinations of solvent, rodlike polymers and flexible polymers. While both of these techniques produce optically clear, nonscattering films of various thicknesses over the entire compositional range, e.g., 1–99 wt% of rodlike polymer, the latter is generally more convenient and has been used extensively in this study. Optical and electron microscopy, wide angle light scattering, and spectroscopic and thermal analysis support the view that these polymer combinations are truly molecularly dispersed.     

Electrochemical Method for the Preparation of Dibromomethyl,Bis(bromomethyl), and Bis(dibromomethyl) Arenes

Electrochemical bromination of alkyl aromatic compounds by two-phase electrolysis yields the corresponding α, α-dibrominated products. The reaction has been carried out in a single-compartment electrochemical cell using aqueous sodium bromide (40–50%), containing a catalytic amount of HBr as electrolyte, and chloroform, containing an alkyl aromatic compound, as the organic phase with a Pt plate as anode at 10–15°C. Two-phase electrolysis results in high yields (70–90%) of dibromomethyl, bis(bromomethyl), and bis(dibromomethyl) arenes, depending upon the charge passed.     

A PEGylated Fluorescent Turn‐On Sensor for Detecting Fluoride Ions in Totally Aqueous Media and Its Imaging in Live Cells

Owing to the considerable significance of fluoride anions for health and environmental issues, it is of great importance to develop methods that can rapidly, sensitively and selectively detect the fluoride anion in aqueous media and biological samples. Herein, we demonstrate a robust fluorescent turn‐on sensor for detecting the fluoride ion in a totally aqueous solution. In this study, a biocompatible hydrophilic polymer poly(ethylene glycol) (PEG) is incorporated into the sensing system to ensure water solubility and to enhance biocompatibility. tert‐Butyldiphenylsilyl (TBDPS) groups were then covalently introduced onto the fluorescein moiety, which effectively quenched the fluorescence of the sensor. Upon addition of fluoride ion, the selective fluoride‐mediated cleavage of the Si? O bond leads to the recovery of the fluorescein moiety, resulting in a dramatic increase in fluorescence intensity under visible light excitation. The sensor is responsive and highly selective for the fluoride anion over other common anions; it also exhibits a very low detection limit of 19 ppb. In addition, this sensor is operative in some real samples such as running water, urine, and serum and can accurately detect fluoride ions in these samples. The cytotoxicity of the sensor was determined to be Grade I toxicity according to United States Pharmacopoeia and ISO 10993‐5, suggesting the very low cytotoxicity of the sensor. Moreover, it was found that the senor could be readily internalized by both HeLa and L929 cells and the sensor could be utilized to track fluoride level changes inside the cells.     

Influence of surface properties on the interfacial adhesion in carbon fiber/epoxy composites

A polyacrylonitrile‐based carbon fiber was electrochemically oxidized in an aqueous ammonium bicarbonate solution with current density of up to 2.76 A/m² at room temperature. X‐ray photoelectron spectroscopy revealed that the oxygen content increased with increasing current density before approaching saturation. The increase can be divided into two regions, the rapid increase region (0–1.78 A/m²) and a plateau region (1.78–2.76 A/m²). The surface chemistry analysis showed that the interlaminar shear strength (ILSS) value of the carbon fiber/epoxy composite could be improved by 24.7%. The carbon structure was examined using Raman spectroscopy in terms of order/disorder in the graphite structure and the results indicated that the relative percentage of graphite carbon in the form of sp² hybridization increased above a current density of 1.39 A/m². The increasing non‐polar graphite carbon on the carbon fiber surface decreased the surface energy. As a result, both the surface free energy () and its polar component () decreased when current density increased above 1.78 A/m². The ILSS value had no direct relationship with the nature and surface density of the oxygen‐containing functional groups nor with the carbon structure. It is the surface free energy (), especially the polar component (), which played a critical role in affecting the interfacial adhesion of carbon fiber/epoxy composites. The ILSS value changed with increasing current density and could be divided into three distinct regions, as chemical interaction region (I), anchor force region (II) and matrix damage region (III). Copyright © 2013 John Wiley & Sons, Ltd.     

Insight into luminescent iridium complexes: Their potential in light-emitting electrochemical cells

Cyclometallated iridium complexes possess fascinating electrochemical and photophysical properties that make them excellent candidates for a variety of photonic and optoelectronic applications. In particular, light-emitting electrochemical cells (LEECs) based on iridium-containing ionic transition-metal complexes (Ir-iTMCs) are a promising alternative to conventional organic light-emitting diodes with several advantages, including a simpler device structure, solution processability, and reduced manufacturing costs. This review aims to provide a comprehensive and systematic overview of the current status of Ir-iTMC-based LEECs using the archetypal complex [Ir(ppy)₂(bpy)]PF₆ as a reference emitter. After a discussion of the device fundamentals and important photophysical and device parameters, key strategies for tuning the emission characteristics and device stability through LUMO and HOMO stabilization/destabilization are presented using numerous examples from the literature, with a particular focus on ligand modification with hydrophobic, electron-withdrawing, and electron-donating substituents, π-stacking interactions, and alternative ancillary and cyclometalated ligand skeletons. Comprehensive data tables summarizing the photophysical and LEEC properties of the various classes of iridium complexes reported to date are also provided. Finally, in an effort to highlight promising directions for future research, the current champion iridium complexes for fabricating state-of-the-art LEECs are identified, and the merits and limitations of existing approaches are discussed.