Piezoelectric transmission spectroelectrochemistry with a normal piezoelectric quartz crystal as an optically-transparent electrode

Piezoelectric transmission spectroelectrochemistry (PTSEC), i.e., the combination of electrochemistry and spectroelectrochemistry (SEC) with electrochemical quartz crystal microbalance (EQCM) technique is reported by using a normal piezoelectric quartz crystal (PQC) as an optically-transparent electrode (OTE). A theoretical relationship between the PQC response and the spectroelectrochemical response is derived and used to estimate the apparent molar absorptivity of the absorbing species deposited on the OTE on the PQC surface. The complex of copper with aspartic acid is used to test this new PQC-SEC technique. Results show that the combination of three such diverse techniques provides a very useful methodology for studying electrode processes and electrode surface characteristics in situ.     

Synthesis and Electrochemical Studies of Spinel LiNi1−xMnxVO4

Spinel compound LiNi_1−xMn_xVO₄ (0≤x≤0.4) had been prepared by using the moist chemical method. X-ray diffraction spectra showed that the lattice constant increased with x in the LiNi_1−xMn_xVO₄, XPS spectra indicating that Li1s had a chemical shift towards lesser binding energy, and manganese in LiNi_1−xMn_xVO₄ existing as the mixed valence of Mn²⁺ and Mn³⁺. The electrochemical charge and discharge testing at a current density of 0.1 mA/cm² between the potentials of 4.0 and 3.0 V vs Li/Li⁺ in 1 mol/dm³ LiPF₆/EC+DEC (1:1 by volume) at 25°C showed that LiNi_1−xMn_xVO₄ cell has a better rechargeability, but a lower cell voltage of 4.0 V vs Li/Li⁺ than that without the doping sample, and the capacity and the cycle efficiency of the Li/LiNi_1−xMn_xVO₄ cells increased with x in the LiNi_1−xMn_xVO₄.     

Alkylation of cobalt and lutetium tetra(3,5-di-tert-butyl-4-hydroxyphenyl)dodecachlorophthalocyanine complexes initiated with current

Electrochemical properties of tetra(3,5-di-tert-butyl-4-hydroxyphenyl)dodecachlorophthalocyanine complexes of cobalt(II) and lutetium(III) in DMF solutions have been studied. It was suggested that in the presence ofn-butyl bromide, the electrochemically generated monoanionic complexes undergo alkylation at the metal atom. The geometries of the neutral and anionic complexes were calculated by the ZINDO/I semiempirical method. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 289–293, February, 1998.     

口腔癌相关唾液肿瘤生物标志物的分析检测研究进展

口腔癌系头颈部癌，癌组织均位于口腔内，其非侵入性早期诊断是减少该病死亡的有效手段.唾液系口腔癌变相关物质首先释放进入的体液，取材方便，安全无创，是口腔癌普查筛选、早期诊断的首选指标.本文对唾液肿瘤生物标志物的种类、目前国内外常用的检测方法进行概述，重点阐述新型电化学生物传感方法在口腔癌相关唾液肿瘤生物标志物检测方面的相关应用及其最新研究进展.并对口腔癌相关唾液肿瘤生物标志物电化学传感技术的未来发展方向提出展望，拟为其深入研究与应用提供参考.     

Iridium mediated methyl and phenyl C-H activation of 2-(arylazo)phenols. Synthesis, structure, and spectral and electrochemical properties of some organoiridium complexes

Reaction of 2-(2′,6′-dimethylphenylazo)-4-methylphenol with [Ir(PPh₃)₃Cl] in refluxing ethanol in the presence of a base (NEt₃) affords an organoiridium complex 5, where the 2-(2′,6′-dimethylphenylazo)-4-methylphenol is coordinated to iridium, via C-H activation of a methyl group, as a dianionic tridentate C,N,O-donor. Two triphenylphosphines and a hydride are also coordinated to the metal center. A similar reaction carried out in toluene affords complex 5 along with a similar complex 7, where a chloride is coordinated to iridium instead of the hydride. Reaction of 2-(2′-methylphenylazo)-4-methylphenol with [Ir(PPh₃)₃Cl] in refluxing ethanol in the presence of a base (NEt₃) affords an organoiridium complex 12, where the 2-(2′-methylphenylazo)-4-methylphenol is coordinated to iridium, via C-H activation at the ortho position of the phenyl group in the 2′-methylphenylazo fragment, as a dianionic tridentate C,N,O-donor. Two triphenylphosphines and a hydride are also coordinated to the metal center. A similar reaction carried out in toluene affords a complex 12 along with a similar complex 13, where a chloride is coordinated to iridium instead of the hydride. Structures of complexes 5, 12 and 13 have been determined by X-ray crystallography. In all these complexes, the two triphenylphosphines are trans. All these complexes show intense MLCT transitions in the visible region. Cyclic voltammetry on all the complexes shows an Ir(III)-Ir(IV) oxidation within 0.60-0.73 V vs. SCE, followed by an oxidation of the coordinated 2-(arylazo)phenolate ligand within 1.08-1.39 V vs. SCE. A reduction of the coordinated 2-(arylazo)phenolate ligand is observed within −1.10 to −1.26 V vs. SCE.     

Electrochemical machining of metals: Fundamentals of electrochemical shaping

Basic problems of metal electrochemical shaping theory are considered. Exact and approxi1mate (quasi-steady-state, locally one-dimensional) methods for solving direct and inverse problems are analyzed. Experimental methods for improving the electrochemical shaping accuracy are considered.Translated from Elektrokhimiya, Vol. 40, No. 12, 2004, pp. 1438–1480.Original Russian Text Copyright © 2004 by Davydov, Volgin, Lyubimov.     

Electrochemical Reduction of Arylxenon Tetrafluoroborates

Reduction potentials of arylxenon(II) tetrafluoroborates have been measured by cyclic voltammetry method on platinum disc and ultramicro electrodes. The electrochemical properties of the arylxenon(II) tetrafluoroborates are quite different to those of corresponding arylperfluoralkyliodine(III) salts.     

Electrochemical reduction of cobalt and nickel complexes with ligands stabilizing metal in low oxidation state

Electrochemical reduction of cobalt(ii) complexes containing -acceptor ligands (L = bpy, Ph₂Ppy) proceeds through three consecutive reversible steps: one-electron transfer to form a more stable Co^IL complex, transfer of two electrons at more negative potentials to form an anionic [NiL]^– complex, and reduction of the ligand to the radical anion. The stability of the cobalt complexes with different ligands decreases in the series Ph₂Ppy > Ph₃P > bpy.     

活性炭纤维电极电解法处理墨绿B染料废水

将铁丝缠绕在活性炭纤维(简称ACF)上制成电极,并在阴极鼓入空气,用电解生成的Fenton试剂处理墨绿B染料模拟废水.研究了电压、pH值、温度、空气流量、支持电解质的浓度等因素对染料脱色率的影响.结果表明,pH值越低,温度越高,处理效果越好,气流量的改变对于处理效果影响不大.室温时处理浓度为50mg·L-1的活性染料墨绿B,在实验电压为11V,中性条件下,无水硫酸钠的浓度为20g·L-1,通入空气流量为60L·min-1时,处理60min,色度去除率达到95%左右.55℃时,电解30min色度去除率就达到96%,60min时达到100%.     

氯氮平、去甲氯氮平及奥氮平的高效液相色谱电化学检测特性的研究

 采用高效液相色谱安培电化学检测法 ,考察了氯氮平、去甲氯氮平和奥氮平在不同 pH值流动相下的色谱分离情况及其色谱峰高与检测电压的关系。结果表明 ,氯氮平、去甲氯氮平和奥氮平的保留时间均随流动相 pH值的升高而延长 ;在pH值为 4 5 6和 5 5 6的流动相中 ,均可实现基线分离。 3种化合物的色谱峰高与检测电压之间呈典型的“S”型曲线 ,pH值升高时该曲线均左移。氯氮平、去甲氯氮平和奥氮平的检测电压必须大于产生最大氧化电流的最低电压才能得到稳定的检测电流。这种典型的“S”型伏安曲线对于化合物的定量和定性检测具有重要意义。