Preparation and reactivity of metal-containing monomers

Electroreduction of methacryloylacetone and its Fe^III and Cu^II complexes was studied by cyclic voltammetry and preparative electrolysis on a Hg electrode. The possibility of the electropolymerization of the compounds at highly negative potentials (–2.0 V, vs sce) has been demonstrated. The polymers obtained were characterized by elemental analysis, electronic, IR-, and Mössbauer spectroscopy.For part 36, see Ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 255–261, February, 1994.     

Effect of chemical modification of ion-exchange membrane MA-40 on its electrochemical characteristics

Transport characteristics of commercial heterogeneous anion-exchange membranes MA-40 and MA-41 are studied, together with those of membrane MA-40M fabricated by treating the MA-40 surfaces with a strong polyelectrolyte complex. It is demonstrated that, after modification, the electrical conductivity of MA-40M in an NaOH solution increases. At overlimiting currents, the water dissociation rate on this membrane decreases as compared with the initial membrane. At the same time, no noticeable change in the rate of transport of counter-ions (ions Cl^-) through the membrane at a fixed potential drop is discovered at under-and overlimiting currents. The MA-40M membrane behavior is explained by the conversion of secondary and tertiary functional ammonium groups in the near-surface membrane layers approximately 80 μm thick into quaternary groups during the treatment by the polyelectrolyte.     

Multistep electrochemical reactions involving transport of intermediates between the near-electrode layer and the bulk solution: A kinetics analysis based on theory of generalized variables (theory of similarity)

A kinetic analysis of multistep electrochemical reactions involving partial diffusion transport of intermediates between the near-electrode layer and the bulk electrolyte is performed within theory of generalized variables (theory of similarity). Dimensionless complexes (similarity criteria) that characterize such reactions are obtained, and their values corresponding to the transport of intermediates are determined.Translated from Elektrokhimiya, Vol. 41, No. 1, 2005, pp. 121–125.Original Russian Text Copyright © 2005 by Protsenko, Danilov.     

Role of Hydrodynamic Conditions in the Distribution of Anodic Dissolution Rates in Cavity Etching Regions during Electrochemical Micromachining of Partially Insulated Surfaces

Experimental study of the distribution of local rates of electrochemical micromachining in the presence of photoresist masks in various hydrodynamic conditions (macroscopically nonuniform rotating disk electrode, sprayer flow, an electrode placed into a cell with chaotic bulk electrolyte mixing) shows that the maximum etching localization is achieved at the control of the dissolution rate by the mass transport rate (at achieving the anodic limiting current). The localization enhancement as compared to the primary current distribution takes place in the case of a turbulent flow at hydrodynamic conditions where the removal of dissolution products from the undercutting region is hindered. These conditions (electrochemical reaction limited by the ion mass transport rate, high resistance to the mass transport in the undercutting region) are necessary for the localization enhancement using a pulsed anodic–cathodic treatment.     

On the reduction of 1-aryl-2-oxo-1,2,3,6-tetra-hydro[1,4]diazepino[6,5-<Emphasis Type="Italic">b</Emphasis>]indole 4-oxides

Electrochemical reduction of 1-aryl-2-oxo-1,2,3,6-tetrahydro[1,4]diazepino[6,5-b]indole 4-oxides, 2-oxo-1-phenyl-1,2,3,6-tetrahydro[1,4]diazepino[6,5-b]indole, and 2-oxo-1-phenyl-1,2,3,4,5,6-hexahydro[1,4]diazepino[6,5-b]indole was studied. The results obtained were compared with previous data for the reduction of 4-oxides with formamidinesulfinic acid.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2715–2718, December, 2004.     

微圆盘电极上耦合—级均相反应的稳态电流

在电极袭面反应物浓度均匀的近似假设下,得到了微圆盘电极上暂态可逆反应的一般解.然后利用该一般解得到了微圆盘电极上耦合一级均相反应的可逆电极反应CE、EC、EC′和ECE 的稳态电流计算公式.     

层状LiMnO2的固相合成及电化学性能

以Mn₂O₃和氢氧化锂为原料，通过焙烧合成出o-LiMnO₂。用X射线衍射和扫描电镜对不同温度下合成的粉末样品进行了表征，并研究了材料的电化学性能。通过对不同温度条件下烧结样品的晶胞参数、布拉格(110)晶面峰半高宽及电化学性能研究发现：600 ℃下合成样品的半高宽最大，堆垛层错率高，同时电化学性能也最好，首次放电容量达到156 mAh·g^-1，20次循环后仍保持在140 mAh·g^-1以上。中高温固相合成的o-LiMnO₂材料，在晶粒范围大小相近时，材料电化学性能与材料堆垛层错率相关。     

低钴AB5型稀土系贮氢电极合金的研究

为了进一步降低AB5型混合稀土系贮氢合金的成本,采用Cr,Si,Cu替代Co和调节化学计量比的方法制备低钴AB5型贮氢合金。结果表明:3种取代元素在寿命方面的效果依次为Si>Cr>Cu,在放电容量和活化性能方面依次是Cu>Cr>Si。Cr,Cu,Si只有少量的替代才可能发挥其有利影响;通过非化学计量比的调节,低钴混合稀土系贮氢电极合金的放电容量、活化性能及倍率放电能力都能较好地达到实用要求,但是循环寿命有待提高。     

环氧环己烷的电化学合成

环氧环己烷的电化学合成何俊翔＊周锦成（温州师范学院化学系温州３２５００３）关键词电化学环氧化，环氧环己烷，环己烯，钛基氧化物电极１９９６－１１－２２收稿，１９９７－０６－０５修回间接电解氧化合成环氧化合物的研究已有报道［１～４］．它们均在铂电极上完成...     

Flow amperometric detection of indigo for enzyme-linked immunosorbent assays with use of screen-printed electrodes

A simple and automated methodology for a sensitive electrochemical detection of enzyme immunoassays that employ alkaline phosphatase (AP) as label has been developed. A flow injection system with programmable pump, valve and cell functions, amperometric detection of indigo and screen-printed electrodes (SPEs) are responsible for the advantages of this methodology. Amperometric detection at a low potential of indigo, the product of the enzymatic hydrolysis of the substrate 3-indoxyl phosphate (IP), is combined with a flow injection system. This incorporates in the flow cell a disposable screen-printed board provided with a graphite working electrode. No electrode pretreatment is necessary to obtain reproducible signals. The system was applied to the determination by an enzyme-linked immunosorbent assays (ELISA) of pneumolysin (PLY), a toxin related to respiratory infections. Linear calibration curves for low and high concentration ranges were obtained. These were also performed in a proteic matrix and linearity was also obtained.