Impedance Response of a Thin Film on an Electrode: Deciphering the Influence of the Double Layer Capacitance

The different contributions of the interfacial capacitance are identified in the case of passive materials or thin protective coatings deposited on the electrode surface. The method is based on a graphical analysis of the EIS results to determine both the passive-film capacitance in the high-frequency domain and the double-layer capacitance in the low-frequency domain. The proposed analysis is shown to be independent of the physicochemical origins of the frequency dispersion of the interfacial capacitances which results, from an analysis point of view of the experimental results, in the use of a constant-phase element However, for a correct evaluation of the thin-film properties such as its thickness, the high-frequency data must be corrected for the double-layer contribution. In particular, it is shown that if the double-layer capacitance gives a frequency-dispersed response, it is necessary to correct the high-frequency part for the double-layer constant-phase elements. This is first demonstrated on synthetic data and then used for the determination of the thickness of thin oxide film formed on Al in neutral pH solution.     

Graphene and Carbon Nanotube-based Electrochemical Sensing Platforms for Dopamine

Dopamine (DA) is an important neurotransmitter, which is created and released from the central nervous system. It plays a crucial role in human activities, like cognition, emotions, and response to anything. Maladjustment of DA in human blood serum results in different neural diseases, like Parkinson's and Schizophrenia. Consequently, researchers have started working on DA detection in blood serum, which is undoubtedly a hot research area. Electrochemical sensing techniques are more promising to detect DA in real samples. However, utilizing conventional electrodes for selective determination of DA encounters numerous problems due to the coexistence of other materials, such as uric acid and ascorbic acid, which have an oxidation potential close to DA. To overcome such problems, researchers have put their focus on the modification of bare electrodes. The aim of this review is to present recent advances in modifications of most used bare electrodes with carbonaceous materials, especially graphene, its derivatives, and carbon nanotubes, for electrochemical detection of DA. A brief discussion about the mechanistic phenomena at the electrode interface has also been included in this review.     

Redox-Active Supramolecular Heteroleptic M4L2L′2 Assemblies with Tunable Interior Binding Site

Three Pt₄L₂L′₂ heteroleptic rectangles ( 1 – 3 ), containing ditopic redox-active bis-pyridine functionalized perylene bisimide (PBI) ligands PBI-pyr₂ ( L ) are reported. Co-ligand L′ is a dicarboxylate spacer of varying length, leading to modified overall size of the assemblies. ¹H NMR spectroscopy reveals a trend in the splitting and upfield chemical shift of the PBI-hydrogens in the rectangles with respect to free PBI, most pronounced with the largest strut length ( 3 ) and least with the smallest strut length ( 1 ). This is attributed to increased rotational freedom of the PBI-pyr ₂ ligand over its longitudinal axis (N_py-N_py), due to increased distance between the PBI-surfaces, which is corroborated by VT-NMR measurements and DFT calculations. The intramolecular motion entails desymmetrization of the two PBI-ligands, in line with cyclic voltammetry (CV) data. The first (overall two-electron) reduction event and re-oxidation for 1 display a subtle peak-to-peak splitting of 60 mV, whilst increased splitting of this event is observed for 2 and 3 . The binding of pyrene in 1 is probed to establish proof of concept of host-guest chemistry enabled by the two PBI-motifs. Fitting the binding curve obtained by ¹H NMR titration with a 1:1 complex formation model led to a binding constant of 964±55 m ⁻¹. Pyrene binding is shown to directly influence the redox-chemistry of 1 , resulting in a cathodic and anodic shift of approximately 46 mV on the first and second reduction event, respectively.     

Electrochemically induced oxidative cyclization of 2,3‐dihydroxypyridine. Synthesis of a novel highly oxygenated heterocyclic compound

Electrochemical oxidation of 2,3‐dihydroxypyridine in aqueous phosphate buffer solution at a glassy carbon electrode has been studied using cyclic voltammetry and controlled potential coulometry. The results indicate that oxidation of 2,3‐dihydroxypyridine on glassy carbon electrode shows an irreversible feature in aqueous solution. This data indicates that the electrochemically generated pyridindione is unstable and via an oxidative conversion pathway converts to a novel highly oxygenated heterocyclic compound. By means of the obtained electrochemical data, an efficient, one‐pot method for the synthesis of this heterocyclic compound based on the oxidative cyclization of 2,3‐dihydroxypyridine under green conditions, and in a good yield and purity is described. Copyright © 2011 John Wiley & Sons, Ltd.     

Multiple Mechanism of NCA Polymerization: Effect of N-Acetylglycine NCA and Related Additives

Polymerization of α-aminoisobutyric acid NCA by alkaline salts of various basicity as well as amines has been investigated. The study was focused on the effect on the initial polymerization rate of additives such as N-acetylglycine NCA and some other less electrophilic additives (l-acetyl-2-pyrrolidone, 3-acetyl-2-oxazolidone, 1-acetyl-3-methylhydantoin) which are all models of the growing chain end produced by the NCA anion pathway. The acetyl endgroup was detected by 250 MHz ¹H-NMR in all the polymers of α-aminoisobutyric acid NCA obtained in the presence of l-acetyl-3-methylhydantoin and triethyl amine or sodium methoxide initiators, whereas the additives influenced variously the kinetics of polymerization according to the nature of the initiator used. The results were interpreted in the light of a multiple mechanism supposing the simultaneous presence of the initiator anion, its conjugate acid, and NCA anion for basic salt initiation. Thus, the observed effect has to be considered as the sum of an elementary acceleration due to NCA anion and of an elementary deceleration due to the initiator anion. Predominance of the pathways involving NCA anion could be shown this way. This conclusion could be extended to γ-benxyl-L-glutamate NCA which is a more reactive NCA. However, the deceleration observed with some additives led us to believe that a nonnegligible participation of initiator anion during initiation cannot be excluded.     

Molecular Composites Comprising Rodlike Polyamides and Vinyl Polymers

Abstract

At present we have strong evidence that several members of a series of wholly-aromatic, para-linked, rodlike polyamides, polyesters, and polyesteramides form molecular composites with certain flexible-chain, thermoplastic polymers over a wide range of compositions. This paper reports on the initial results of an investigation of intermolecular interactions using spectroscopy and various scattering techniques as well as characterization of some of the mechanical and optical properties of these materials. The composites are made by two techniques: 1) photo-polymerization of a homogeneous solution of a rodlike polymer in a monomer containing a photoinitiation; 2) solvent evaporation from homogeneous solutions of very limited combinations of solvent, rodlike polymers and flexible polymers. While both of these techniques produce optically clear, nonscattering films of various thicknesses over the entire compositional range, e.g., 1–99 wt% of rodlike polymer, the latter is generally more convenient and has been used extensively in this study. Optical and electron microscopy, wide angle light scattering, and spectroscopic and thermal analysis support the view that these polymer combinations are truly molecularly dispersed.     

Trityl Salt-Initiated Cationic Polymerization of 1,2-Cyclohexene Oxide: Structural Analyses of the Products

The polymerization of 1,2-cyclohexene oxide was carried out at 0°C in dichloroethane with triphenylmethyl hexafluoroarsenate as the initiator. A typical reaction product (PCHO-1) was analyzed by infrared and nuclear magnetic resonance spectroscopy as well as by gel-permeation chromatography, x-ray diffraction, and differential scanning calorimetry (DSC). The x-ray and DSC data show that PCHO-1 is an amorphous substance. The results of the NMR analyses show that the propagation step in the trityl salt-initiated polymerization obeys Bernoullian statistics with a P_m value of 0.38.     

A review on environmental applications of chitosan biopolymeric hydrogel based composites

Abstract

Chitosan (CS) is being used for fabrication of low cost, biocompatible materials that have applicability in fields such as agriculture, biotechnology and environment. In Environmental research, one of the applications of CS based hydrogel composites are in form of biosorbents for eviction of toxic dyes, heavy metals and nutrients from effluent streams. The adsorption potential could be attributed to the reactive functional groups existing on the surface of CS. CS based materials can also be employed for oil/water separation, as a fertilizer carrier, in Microbial fuel cells as Electrolyte membrane and as Electrochemical/Biosensors for detecting and analyzing few environmental pollutants such as pesticides. The earlier review papers on the subject matter have concentrated mainly on dye and heavy metal removal without giving details of its utility in the field of electrochemistry and agriculture. Though the biopolymer holds numerous applications, it has not been discussed extensively. Thus, an attempt has been made to elucidate the current and potential applications of CS hydrogels and composites based on the efficacy it has shown in areas of removal of organic and inorganic contaminants such as dyes, heavy metals and nutrients, in agriculture, oil and water separation, Microbial Fuel cells and Electrochemical/Biosensors.

• HIGHLIGHTS

• Chitosan based hydrogel composites could be extensively used in the field of Environment Technology.

• The composites act as effective biosorbents for dye, heavy metal and nutrient removal because of the functional groups present on Chitosan’s surface.

• These can also be effectively used for oil/water separation and also as a fertilizer/pesticide carrier for their slow release.

• Chitosan based electrolytes can become a promising ecofriendly substitute for synthetic polymers in fuel cells.

• These biopolymers have also been researched upon as electrochemical/biosensors in recent years for detecting environmental pollutants.

     

碳和石墨烯对磷酸锰锂材料性能的影响

在采用溶剂热法制备磷酸锰锂的基础上,以蔗糖和石墨烯为碳源,制备了裂解碳和石墨烯含量不同的磷酸锰锂/碳/石墨烯复合材料,研究了裂解碳和石墨烯对材料性能的影响。采用扫描电镜（SEM）和透射电镜（TEM）对材料的形貌进行了表征。裂解碳包覆可以提高LiMnPO₄纳米片表面的电子导电性,对于材料性能的改善起到主要的作用;石墨烯可以提高纳米片之间的电子和离子导电性,改善材料的电化学性能。电化学测试表明,当裂解碳含量为4%、石墨烯含量为2%时,LiMnPO₄电极具有较好的电化学性能,在0.5C下的放电比容量为139.1 mAh·g^-1,循环100次后,容量保持率为93.6%。与添加单一碳和单一石墨烯的LiMnPO₄电极相比,该电极在0.5C下的放电比容量分别提高了35.0%和48.6%。