Controlled Synthesis of Cr‐Co0.85Se Nanoarrays for Water Splitting at an Ultralow Cell Voltage of 1.43 V

Water splitting has attracted more and more attention as a promising strategy for the production of clean hydrogen fuel. In this work, a new synthesis strategy was proposed, and Co_0.85Se was synthesized on nickel foam as the main matrix. The doping of appropriate Cr amount into the target of Co_0.85Se and the Cr‐Co_0.85Se resulted in an excellent electrochemical performance. The doping of Cr introduces Cr³⁺ ions which substitute Co²⁺ and Co³⁺ ions in Co_0.85Se, so that the lattice parameters of the main matrix were changed. It is worth noting that the Cr0.15‐Co_0.85Se/NF material exhibits an excellent performance in the oxygen evolution reaction (OER) test. When the current density reaches 50 mA cm^?2 for OER, the overpotential is only 240 mV. For the hydrogen evolution reaction (HER) tests, the overpotential is only 117 mV to drive 10 mA cm^?2 of current density. Moreover, when the Cr0.15‐Co_0.85Se/NF material is used as a two‐electrode device for whole water splitting, the required cell voltage is only 1.43 V to reach a current density of 10 mA cm^?2, which is among the lowest values of the published catalysts up to now. In addition, the Cr0.15‐Co_0.85Se/NF catalyst also exhibits excellent stability during a long period of water splitting. The experimental result demonstrates that the change of the lattice structure has an obvious influence on the electrocatalytic activity of the material. When an external electric field is applied, it facilitates the rapid electron transfer rate and enhances the electrocatalytic performance and stability of the material.     

Investigation of Structural Evolution of SnO2 Nanosheets towards Electrocatalytic CO2 Reduction

In‐depth understanding of the catalytic active sites is of paramount importance for the design of efficient electrocatalysts for CO₂ conversion. Here we highlight the structural evolution of SnO₂ nanosheets for electrocatalytic CO₂ reduction. The transformation of SnO₂ into metallic Sn would occur on the surface of catalyst during the catalytic process, followed by enhanced selectivity and activity for the conversion of CO₂ to HCOOH. Electrocatalytic characterization and structural analysis demonstrate that the metallic Sn derived from structural evolution plays a dominant role in the CO₂ reduction to HCOOH. This work deepens the understanding of the catalytic mechanism and provides a new pathway for the rational design of advanced electrocatalysts for CO₂ reduction.     

Hyperbranched Poly(ester‐enamine) from Spontaneous Amino‐yne Click Reaction for Stabilization of Gold Nanoparticle Catalysts

Hyperbranched polymers have garnered much attention due to attractive properties and wide applications, such as drug‐controlled release, stimuli‐responsive nano‐objects, photosensitive materials and catalysts. Herein, two types of novel hyperbranched poly(ester‐enamine) (hb‐PEEa) were designed and synthesized via the spontaneous amino‐yne click reaction of A₂ monomer (1, 3‐bis(4‐piperidyl)‐propane (A_2a) or piperazine (A_2b)) and B₃ monomer (trimethylolpropanetripropiolate). According to Flory's hypothesis, gelation is an intrinsic problem in an ideal A₂+B₃ polymerization system. By controlling the polymerization conditions, such as monomer concentration, molar ratio and rate of addition, a non‐ideal A₂+B₃ polymerization system can be established to avoid gelation and to synthesize soluble hb‐PEEa. Due to abundant unreacted alkynyl groups in periphery, the hb‐PEEa can be further functionalized by different amino compounds or their derivates. The as‐prepared amphiphilic PEG‐hb‐PEEa copolymer can readily self‐assemble into micelles in water, which can be used as surfactant to stabilize Au nanoparticles (AuNPs) during reduction of NaBH₄ in aqueous solution. As a demonstration, the as‐prepared PEG‐hb‐PEEa‐supported AuNPs demonstrate good dispersion in water, solvent stability and remarkable catalytic activity for reduction of nitrobenzene compounds.     

Achieving Superior Electrocatalytic Performance by Surface Copper Vacancy Defects during Electrochemical Etching Process

Vacancy defects of catalysts have been extensively studied and proven to be beneficial to various electrocatalytic reactions. Herein, an ultra‐stable three‐dimensional PtCu nanowire network (NNW) with ultrafine size, self‐supporting rigid structure, and Cu vacancy defects has been developed. The vacancy defect‐rich PtCu NNW exhibits an outstanding performance for the oxygen reduction reaction (ORR), with a mass activity 14.1 times higher than for the commercial Pt/C catalyst (20 %.wt, JM), which is currently the best performance. The mass activity of the PtCu NNW for methanol oxidation reaction (MOR) is 17.8 times higher than for the commercial Pt/C catalyst. Density‐functional theory (DFT) calculations indicate that the introduction of Cu vacancies enhances the adsorption capacity of Pt atoms to the HO* intermediate and simultaneously weakens the adsorption for the O* intermediate. This work presents a facile strategy to assemble efficient electrocatalysts with abundant vacancy defects, at the same time, provides an insight into the ORR mechanism in acidic solution.     

Electroreductive Cobalt‐Catalyzed Carboxylation: Cross‐Electrophile Electrocoupling with Atmospheric CO2

The chemical use of CO₂ as an inexpensive, nontoxic C1 synthon is of utmost topical interest in the context of carbon capture and utilization (CCU). We present the merger of cobalt catalysis and electrochemical synthesis for mild catalytic carboxylations of allylic chlorides with CO₂. Styrylacetic acid derivatives were obtained with moderate to good yields and good functional group tolerance. The thus‐obtained products are useful as versatile synthons of γ‐arylbutyrolactones. Cyclic voltammetry and in operando kinetic analysis were performed to provide mechanistic insights into the electrocatalytic carboxylation with CO₂.     

Rare‐Earth Single Erbium Atoms for Enhanced Photocatalytic CO2 Reduction

The solar‐driven photocatalytic reduction of CO₂ (CO₂RR) into chemical fuels is a promising route to enrich energy supplies and mitigate CO₂ emissions. However, low catalytic efficiency and poor selectivity, especially in a pure‐water system, hinder the development of photocatalytic CO₂RR owing to the lack of effective catalysts. Herein, we report a novel atom‐confinement and coordination (ACC) strategy to achieve the synthesis of rare‐earth single erbium (Er) atoms supported on carbon nitride nanotubes (Er₁/CN‐NT) with a tunable dispersion density of single atoms. Er₁/CN‐NT is a highly efficient and robust photocatalyst that exhibits outstanding CO₂RR performance in a pure‐water system. Experimental results and density functional theory calculations reveal the crucial role of single Er atoms in promoting photocatalytic CO₂RR.     

Bridge Bonded Oxygen Ligands between Approximated FeN4 Sites Confer Catalysts with High ORR Performance

The applications of the most promising Fe—N–C catalysts are prohibited by their limited intrinsic activities. Manipulating the Fe energy level through anchoring electron‐withdrawing ligands is found effective in boosting the catalytic performance. However, such regulation remains elusive as the ligands are only uncontrollably introduced oweing to their energetically unstable nature. Herein, we report a rational manipulation strategy for introducing axial bonded O to the Fe sites, attained through hexa‐coordinating Fe with oxygen functional groups in the precursor. Moreover, the O modifier is stabilized by forming the Fe?O?Fe bridge bond, with the approximation of two FeN₄ sites. The energy level modulation thus created confers the sites with an intrinsic activity that is over 10 times higher than that of the normal FeN₄ site. Our finding opens a novel strategy to manage coordination environments at an atomic level for high activity ORR catalysts.     

A Blinking Mesoporous TiO2−x Composed of Nanosized Anatase with Unusually Long‐Lived Trapped Charge Carriers

A mesoporous TiO_2?x material comprised of small, crystalline, vacancy‐rich anatase nanoparticles (NPs) shows unique optical, thermal, and electronic properties. It is synthesized using polymer‐derived mesoporous carbon (PDMC) as a template. The PDMC pores serve as physical barriers during the condensation and pyrolysis of a titania precursor, preventing the titania NPs from growing beyond 10 nm in size. Unlike most titania nanomaterials, during pyrolysis the NPs undergo no transition from the anatase to rutile phase and they become catalytically active reduced TiO_2?x. When exposed to a slow electron beam, the NPs exhibit a charge/discharge behavior, lighting up and fading away for an average period of 15 s for an extended period of time. The NPs also show a 50 nm red‐shift in their UV/Vis absorption and long‐lived charge carriers (electrons and holes) at room temperature in the dark, even long after UV irradiation. The NPs as photocatalysts show a good activity for CO₂ reduction.     

Photo‐excited Oxygen Reduction and Oxygen Evolution Reactions Enable a High‐Performance Zn–Air Battery

The storage of solar energy in battery systems is pivotal for a sustainable society, which faces many challenges. Herein, a Zn–air battery is constructed with two cathodes of poly(1,4‐di(2‐thienyl))benzene (PDTB) and TiO₂ grown on carbon papers to sandwich a Zn anode. The PDTB cathode is illuminated in a discharging process, in which photoelectrons are excited into the conduction band of PDTB to promote oxygen reduction reaction (ORR) and raise the output voltage. In a reverse process, holes in the valence band of the illuminated TiO₂ cathode are driven for the oxygen evolution reaction (OER) by an applied voltage. A record‐high discharge voltage of 1.90 V and an unprecedented low charge voltage of 0.59 V are achieved in the photo‐involved Zn–air battery, regardless of the equilibrium voltage. This work offers an innovative pathway for photo‐energy utilization in rechargeable batteries.