4-乙烯基吡啶-镍(钴)及丙烯酰胺-镍(钴)的制备、结构、聚合及聚合物的催化性能

制备了4-乙烯基吡啶-镍(钴)和丙烯酰胺-镍(钴)络合物并研究了它们的结构。在自由基引发剂的作用下,4-乙烯基吡啶-镍可进行溶液聚合,也可与苯乙烯共聚合,测定了单体的竞聚率。所得的聚(4-乙烯基吡啶-镍)及聚(4-乙烯基吡啶-钴)以NaBH_4还原后可作为一些有机化合物的加氢催化剂。由IR及XPS分析说明在丙烯酰胺-镍络合物中,与镍离子发生了络合作用的是羧基上的氧原子。     

Surface Properties of Cu Doped La-Ni Intermetallic Compounds

A series of Cu-doped La-Ni intermetallic compounds(LaN5-xCux, x = 0-4) was studied. The bulk structure and surface composition of the samples were detected before and after they were used as catalyst for nitrobenzene hydrogennation. The catalytic properties of the intermetallic compounds depend on the surface region composition, especially on the valence of the metal ions.     

Water-soluble chiral monosulfonamide-cyclohexane-1,2-diamine-RhCp complex and its application in the asymmetric transfer hydrogenation (ATH) of ketones

Monosulfonamide ligands with heteroatom/heterocyclic systems were derived from trans-(1R,2R)-cyclohexane-1,2-diamine and complexed with [Ru(benzene)Cl₂]₂, [Cp^∗RhCl₂]₂ in situ and used in the ATH of aromatic ketones with aqueous sodium formate as the hydrogen source. The chiral secondary alcohols were obtained with >93% enantioselectivity and >89% yield. Reduction in water was faster than in isopropanol/KOH. Addition of surfactants showed little or no effects.     

Enantioselective Catalysis CXLI [1]. Tridentate Ligands with 1-(Pyridin-2-yl)ethylamine as Chiral Building Block in the Enantioselective Transfer Hydrogenation of Acetophenone

Summary.  A series of novel tridentate ligands with nitrogen and oxygen donor sites was synthesized starting from enantiomerically pure (S)- and (R)-1-(pyridin-2-yl)ethylamine, the preparation and resolution of which was developed. The new optically active ligands were tested as in situ catalysts together with Ru(PPh₃)₃Cl₂ in the enantioselective transfer hydrogenation of acetophenone with isopropanol. The secondary amine ligand (S)-2,4-di-tert-butyl-6-(1-(pyridin-2-yl)ethylamino)methylphenol gave the best results with almost quantitative conversion and 47%ee. Received August 17, 2001. Accepted August 27, 2001     

Synthesis, structure, catalytic transfer hydrogenation and biological activity of cyclometallated ruthenium(III)2-(arylazo)phenolate complexes

A series of mononuclear organoruthenium complexes of the type [RuX(PPh₃)₂(L)] (X = Cl or Br; L = 2-(arylazo)phenolate ligand) have been synthesized from the reaction of five 2-(arylazo)phenol ligands with ruthenium(III) precursors, viz. [RuCl₃(PPh₃)₃] and [RuBr₃(PPh₃)₂(CH₃OH)] in benzene under reflux. In all these reactions, the 2-(arylazo)phenolate ligand replaces one triphenylphosphine molecule, two chlorides or bromides and one methanol from the precursors leading to five-membered cyclometallated species. The 2-(arylazo)phenol ligands behave as dianionic tridentate C, N, O donors and coordinated to ruthenium by dissociation of the phenolic proton and the phenyl proton at the ortho position of the phenyl ring. The compositions of the complexes have been established by elemental analysis, magnetic susceptibility measurement, FT-IR, UV-Vis and EPR spectral data. These complexes are paramagnetic and shows intense d-d and charge transfer transitions in chloroform. The solution EPR spectrum of the complex 7 in dichloromethane at 77 K shows rhombic distortion around the ruthenium ion. The structural conformation of the complex 1 has been carried out by X-ray crystallography. The redox behavior of the complexes has been investigated by cyclic voltammetry and the potentials are observed with respect to the electronic nature of substituents (R) in the 2-(arylazo) phenolate ligands. These complexes catalyze transfer hydrogenation of benzophenone to benzhydrol with up to 99.5% in the presence of i-prOH/KOH. Further, these complexes have shown great promise in inhibiting the growth of both Gram +ve and Gram −ve bacteria, viz. Staphylococcus aureus NCIM 2079 and Escherichia coli NCIM 2065 and fungus Candida albicans NCIM 3102.     

Influence of the Br?nsted and Lewis Acid Sites in Platinum/Solid Acid Catalysts on the Hydrogenation of Benzene and Toluene

The hydrogenation of benzene and toluene was investigated over US-SSY, -Al₂O₃, and Ha1-MCM-41 supported platinum catalysts. The acidity of catalyst supports was measured by IR spectra of pyridine adsorption. On the Brönsted acid supported catalyst, both the hexacyclic saturation product and the pentacyclic one, the hydroisomerization product, were observed, and these two products were revealed to be primary reaction products. The two products were proposed to be formed competitively on Brönsted acid sites with carbonium ions as the reaction intermediate. By contrast, no hydroisomerization product was found on Lewis acid supported catalysts. It was inferred that the electron-deficient reaction intermediate formed on Lewis acids could not undertake any skeletal isomerization process to give a pentacyclic saturation product.     

Performance of Pt/SnO2 catalyst in the gas phase hydrogenation of crotonaldehyde

Selective hydrogenation of crotonaldehyde was performed on 5% Pt/SnO₂ catalysts, in gaseous phase, at atmospheric pressure, at 353 K. Two types of catalyst were prepared using H₂PtCl₆ and Pt(NH₃)₄(NO₃)₂ as metallic precursors. Their performances were compared as a function of the reduction temperature and both catalysts were characterised by X-ray diffraction after different reduction treatments. Using the ex-chloride catalyst, the selectivity values to the unsaturated alcohol (UOL) resulted into a maximum of 45% while a selectivity as high as 70–77%, in 0–25% conversion range, was achieved by using ex-nitrate catalyst reduced at 443 K. The formation of Pt–Sn alloy on the metal particles of platinum was thought to be necessary to improve the activity and the selectivity on these catalysts. In the contrast, a presence of PtSn₂ formed at a reduction temperature higher than 473 K led to a decrease of activity and selectivity.     

The partial hydrogenation of benzene to cyclohexene by nanoscale ruthenium catalysts in imidazolium ionic liquids

The controlled decomposition of an Ru(0) organometallic precursor dispersed in 1-n-butyl-3-methylimidazolium hexafluorophosphate (BMI.PF(6)), tetrafluoroborate (BMI.BF(4)) or trifluoromethane sulfonate (BMI.CF(3)SO(3)) ionic liquids with H(2) represents a simple and efficient method for the generation of Ru(0) nanoparticles. TEM analysis of these nanoparticles shows the formation of superstructures with diameters of approximately 57 nm that contain dispersed Ru(0) nanoparticles with diameters of 2.6+/-0.4 nm. These nanoparticles dispersed in the ionic liquids are efficient multiphase catalysts for the hydrogenation of alkenes and benzene under mild reaction conditions (4 atm, 75 degrees C). The ternary diagram (benzene/cyclohexene/BMI.PF(6)) indicated a maximum of 1 % cyclohexene concentration in BMI.PF(6), which is attained with 4 % benzene in the ionic phase. This solubility difference in the ionic liquid can be used for the extraction of cyclohexene during benzene hydrogenation by Ru catalysts suspended in BMI.PF(6). Selectivities of up to 39 % in cyclohexene can be attained at very low benzene conversion. Although the maximum yield of 2 % in cyclohexene is too low for technical applications, it represents a rare example of partial hydrogenation of benzene by soluble transition-metal nanoparticles.     

Synthesis of enantiopure 1,2-diamine attached to cross-linked polystyrene and its application to an insoluble catalyst for asymmetric hydrogenation

A novel enantiopure 1,2-diamine (5) having two phenolic hydroxy groups was attached into chloromethylated polystyrene through benzyl ether linkage, which was used as a chiral ligand of the catalyst in asymmetric hydrogenation of acetophenone.     

Immobilization of Polymer-Stabilized Noble Metal Colloids and Their Catalytic Properties for Hydrogenation of Olefins

Polymer-stabilized noble metal colloids were efficiently immobilized on silica by the addition of organic acids under mild conditions. The function of organic acids in the immobilization was studied by infrared spectroscopy. Transmission electron micrographs indicate that the immobilized colloids have a controlled particle size and size distribution. They serve as catalysts in the hydrogenation of cyclohexene and cyclopentadiene, the results of which show that this new type of immobilized colloid has high selectivity and good stability.