Application of a new fast multipole BEM for simulation of 2D elastic solid with large number of inclusions

A fast multipole method (FMM) is applied for BEM to reduce both the operation and memory requirement in dealing with very large scale problems. In this paper, a new version of fast multipole BEM for 2D elastostatics is presented and used for simulation of 2D elastic solid with a large number of randomly distributed inclusions combined with a similar subregion approach. Generalized minimum residual method (GMRES) is used as an iterative solver to solve the equation system formed by BEM iteratively. The numerical results show that the scheme presented is applicable to certain large scale problems. The project supported by the National Nature Science Foundation of China (10172053) and the Ministry of Education     

Interaction of elastic waves with a periodic array of collinear inplane cracks

A boundary integral equation method is applied to the study of the interaction of plane elastic waves with a periodic array of collinear inplane cracks. Numerical results are presented for the dynamic stress intensity factors. The effects of the wave type, wave frequency, wave incidence angle, and crack spacing on the dynamic stress intensity factors are analyzed in detail. The project supported by the Committee of Science and Technology of Shanghai and Tongji University     

多胞材料的力学行为

多胞材料具有独特的力学性质,其工程应用日益增加.人造多胞材料可以分为蜂窝材料和泡沫材料两类.本文介绍了这两类材料在不同载荷条件下力学行为的研究概况.对于某些天然材料(木材和松质骨)的多胞结构及其模型也作了简要介绍.     

在PC机上实现开环光纤陀螺数字解调的方法研究

本介绍了开环光纤陀螺输出信号数字调解在通用PC机上的实现方法,合理地选取了相关参数,为研制采用DSP微处理器的数字式光纤陀螺提供良好的技术基础。     

Generalized Method of Separation of Variables on the Nonlinear Elastic-Plastic Wave Motion

The method of separation of variables is developed in addition to the Karman method and the method of characteristics for the wave motion of uniaxial stress in rods. Rate-independent theory is considered and it is shown that the plastic wave speed is independent of the constant n in the stress-strain law. Stresses are determined in explicit forms for two cases.     

层状弹塑性板动力变形的数值研究(英文)

本文研究了搁置在任意形状轴承上的层状平板,加上脉冲载荷(如炸药爆炸),结果产生塑性流动,改变了板和轴承的接触和破坏了层状板之间的接合,使之发生滑移,最后板形成残余形变,强动载冲击板产生形变的实际过程可分为两个阶段:第一阶段为应力波的传播和在板内应力波的相互作用,主要是从自由面反射的应力波和从轴承面反射的应力波,波经重复几次反射后,造成板的屈曲状态,其间,板的中间层始终保持中线弹性状态。第二阶段为板内某些截面发生塑性形变,随厚度不同而不同地收缩,同时所有的板均拉伸而增加了板的弯曲,最后,塑性形变消耗掉能量后,板各单元变为弹性状态而产生某种模型的振动。     

刚体撞块撞击弹性长杆的二次撞击分析

本文采用应力波特征线方法详细分析了刚体撞击固支的弹性长杆的撞击过程，指出当撞块质量和长杆质量的比值满足一定条件时，在第一次撞击过程结束后会发生第二次撞击。     

MULTIPLE SCATTERING AND DYNAMIC STRESS ANALYSIS OF ELASTIC WAVES IN A FIBER—REINFORCED COMPOSITE WITH INTERFACES

Based on the theory of elastic dynamics, multiple scattering of elastic waves and dynamic stress concentrations in fiber-reinforced composite are studied. The analytical expressions of elastic waves in different regions are presented. The mode coefficients of elastic waves are determined in accordance with the continuous conditions of displacement and stress on the boundary of the multi-interfaces. By using the addition theorem of Hankel functions, the formula of scattered wave fields in different local coordinates are transformed into those in one local coordinate to determine the unknown coefficients and dynamic stress concentration factors (DSCFs). The influences of the distance between two inclusions, material properties and structural size on the DSCFs near the interfaces are analyzed. As examples, the numerical results of DSCFs near the interfaces for two kinds of fiber-reinforced composites are presented and discussed. The project supported by the National Natural Science Foundation of China (19972018)     

Elastic modulus and yield stress of suspensions

A recent technique, developed to measure yield stress has here also been used to determine the elastic modulus of a suspension. Temperature effects have been measured.     

光纤检测系统在燃气管道应力、位移实验分析中的应用

城市燃气管道是城市基础设施的重要组成部分,由于城市路面车流量的增加、道路的路况以及管道本身材质的缺陷,在长期的工作环境下,埋入地下的管道受到了各种力的作用,其受力情况十分复杂。目前管道的埋深和管道本身的设计是根据设计人员的经验或者简单理论分析来确定的,遇到沉降因素复杂的特殊地段管道,其安全就不能保证,所以有必要进行实验分析。本文通过特殊地段管道的模拟试验,分析了在不同沉降因素作用下管道的安全性,试验中应用光纤检测系统及电测系统同时进行检测,两者的分析结果相近,为燃气管道沉降参数监测与预报系统的建立奠定实验基础。