Relationship between the dynamic softening transition and wet sliding friction of elastomer compounds

For properly chosen elastomer compounds, thermorheological characterization is combined with an examination of the variation of the wet sliding friction with temperature. A conceptual argument leads to the assumption that the wet sliding friction should maximize at the energy dissipation peak associated with the dynamic softening transition at a characteristic frequency determined by the sliding speed and the effective smallest surface asperity scale. The dynamic softening transition is characterized with the peak in tan δ/G′ⁿ, where tan δ is the loss tangent, G′ is the elastic modulus, and n is a constant between 0 and 1. The William–Landel–Ferry transform is uncritically applied for extrapolating the position of the peak in tan δ/G′ⁿ at high frequencies. Even based on the criterion of tan δ, the results obtained on a concrete surface indicate that the effective smallest asperity scale is of order of 100 μm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2467–2478, 2004     

NMR investigation of concentrated alumina and silica slurries

The longitudinal relaxation times (T₁) of water in concentrated silica and alumina slurries were measured as a function of solids content. It was shown that the results could be fit very well with a two-phase fast-exchange model between free and surface-bound water. As expected, values of T₁ for bound water were in the order of 20–2000 times lower than that for free water, indicating a higher effective viscosity of the surface-bound water. The strength of the interaction depended on the particular surface, and all of the aluminas examined interacted more strongly with water than the two silicas studied, which themselves differed considerably. The chemical mechanical polishing (CMP) removal rate of tantalum by silica slurries was shown to be directly correlated with the interaction parameters, derived from the NMR relation times rather than with total surface hydroxyl group concentration.     

亚像元动态成像技术中系统调制传递函数的数值分析

亚像元动态成像技术是目前实现遥感器小型化非常有效的新方法,因而研究亚像元动态成像系统的调制传递函数MTF显得非常必要和重要.介绍了亚像元动态成像的基本原理及成像过程,指出了光程差对亚像元动态成像系统MTF的影响.对亚像元动态成像系统的MTF进行了数值分析,并指出了亚像元动态成像系统的成像质量及空间分辨率与一般成像系统相比较的优点.     

氟代吡啶阳离子的理论研究

利用量子化学密度泛函理论B3LYP方法及 6 31G(d ,p)、6 311G(d ,p)、6 31+G(d ,p)和 6 311+G(d ,p)基组对五氟代吡啶、2 ,6 二氟代吡啶和 2 氟代吡啶分子的阳离子进行了计算研究 .B3LYP构型优化和频率分析计算结果表明这三种氟代吡啶阳离子的结构分别具有C2v、C2v和Cs 对称性 ,电子基态分别为2 A2 、2 A2 和2 A″ .对离子和分子的计算构型做了比较 .利用B3LYP方法和不同的基组对这三种阳离子及其分子进行了自然布居分析计算 .用B3LYP方法对这三种阳离子 (自由基 )中的超精细结构进行了计算 ,对五氟代吡啶、2 ,6 二氟代吡啶和2 氟代吡啶分子的垂直电离势和绝热电离势进行了计算 ,与实验值符合得很好     

Some Aspects of the Implementation of Scaling Quantum Mechanical Molecular Force Fields

Some features of software implementation of the Pulay scaling procedure are considered. The advantages of the single value decomposition method for maintaining well-conditionality of the scale factor determination problem are demonstrated. The necessity of using a rational number of scale factors is shown. The possibility of obtaining transferable scale factors with the Pulay method and thus predict the vibrational spectra of related compounds is emphasized.     

The Crystal Structure of N-Benzoyl-N''-(2-hydroxyethyl)-thiourea

Thiourea compounds are excellent agents of bioactive substance. A number of biological activities are associated with substituted thiourea derivatives. A survey of literature reveals that some work has been reported on benzoylthiourea, which has found plenty of applications as a facile and simple ligand in determination of trances of the transition metal and as an available starting material in preparation of a wide variety of metal complexes. In recent years,N-benzoyl-N'-(2-hydroxyethyl)-thiourea has attracted considerable attention as selective reagents for the liquid-liquid extraction and preconcentration of platinum group metals and its antifungle activity.As a part of our works in studying coordination behaviours of N-benzoyl-N'-(2-hydroxyethyl)-thiourea and its bioactivity, in view of these observations and in continuation of our previous works on it, the present work was reported on the crystal structure of N-benzoyl-N'-( 2-hydroxyethyl)-thiourea.The crystals structure in the monoclinic system and space group of P21/c of N-benzoyl-N'-(2-hydroxyethyl)- thiourea (C10H12N2O2S) was determined from single-crystal X-ray diffraction analysis, a = 17.083 (3) A, b = 4.5490 (10) A, c = 14.279 (3)A, a = 90.00°, a = 102.44(3)°, a = 90.00 °, Ⅴ = 1083.6 (4)A3, Z = 4, Dc = 1.375 Mg/m3, i (Mo Ka)= 0.280 mm-1, F(000) =472. The final R and u R are 0.0399 and 0.0881 for 783 observed reflections [Ⅰ＞26(Ⅰ)].Fig. 1 shows the molecular crystal structure of N-benzoyl-N'-(2-hydroxyethyl)thiourea indicating that the carbonyl and thiocarbonyl moieties are pointing in approximate opposite directions. The six atoms in the ring structure hydrogen bonded are almost in one plane. The N(2)-H proton pendant arm extends to the carbonyl oxygen atom, forms hydrogen bond between them.The existence of hydrogen bond in benzoyl-thiourea molecular six-membered ring structure has significant implications on coordination properties, suggest the possibility of intramolecular hydrogen bond controlled coordination behaviors of these potentially bidentate ligands. In the coordination compound reported by Bourne et al.,cis-bis(N-benzoyl-N'-propylthiourea)dichloroplatinum(Ⅱ), the two ligand molecules bind to Pt(Ⅱ)via the sulfur atoms only, the carbonyl oxygen atom being locked into hydrogen bond similar to that in the free ligands.     

On General Mixed Quasivariational Inequalities

In this paper, we suggest and analyze several iterative methods for solving general mixed quasivariational inequalities by using the technique of updating the solution and the auxiliary principle. It is shown that the convergence of these methods requires either the pseudomonotonicity or the partially relaxed strong monotonicity of the operator. Proofs of convergence is very simple. Our new methods differ from the existing methods for solving various classes of variational inequalities and related optimization problems. Various special cases are also discussed.     

Conjugacy relationship between M-convex and L-convex functions in continuous variables

By extracting combinatorial structures in well-solved nonlinear combinatorial optimization problems, Murota (1996,1998) introduced the concepts of M-convexity and L-convexity to functions defined over the integer lattice. Recently, Murota–Shioura (2000, 2001) extended these concepts to polyhedral convex functions and quadratic functions in continuous variables. In this paper, we consider a further extension to more general convex functions defined over the real space, and provide a proof for the conjugacy relationship between general M-convex and L-convex functions.Mathematics Subject Classification (1991): 90C10, 90C25, 90C27, 90C35This work is supported by Grant-in-Aid of the Ministry of Education, Culture, Sports, Science and Technology of Japan     

Piecewise Deterministic Markov Control Processes with Feedback Controls and Unbounded Costs

The control of piecewise-deterministic processes is studied where only local boundedness of the data is assumed. Moreover the discount rate may be zero. The value function is shown to be solution to the Bellman equation in a weak sense; however the solution concept is strong enough to generate optimal policies. Continuity and compactness conditions are given for the existence of nonrelaxed optimal feedback controls.     

Analysis of end point vibrations of a two-link manipulator by integrated CAD/CAE procedures

In this work, the effect of flexibility on the trajectory of a planar two-link manipulator is studied using integrated computer-aided design/analysis (CAD/CAE) procedures. The solid models and finite element models of the parts of the manipulator are created by using the CAD/CAE software I-DEAS. The assembly is defined, and knowing the payload and the end point trajectory, the velocities and accelerations of the parts, joint forces and driving torques are calculated using the rigid body dynamics. All the time dependent nodal forces acting on the parts including distributed gravity and inertia forces are created in files with the I-DEAS program file format. The finite element vibration analysis of the parts is performed by I-DEAS. The end point vibrations and the deviations from the rigid-body trajectory are analyzed for different types of end point acceleration curves. A circular trajectory is considered as an example. It is observed that the precision of the manipulator can be increased by testing different end point acceleration curves without changing the trajectory and the duration of the end point work. The procedure explained in this work can be used for this purpose successfully.