EicC对撞光学设计

EicC是中国科学院近代物理研究所计划建造的中国电子-离子对撞机装置,该对撞机质心能位于20 GeV附近,是研究海夸克的最佳能量窗口,同时还可研究胶子和价夸克。EicC对撞粒子为高极化率质子和电子束团,质子环pRing采用八字环设计方案,可以更好地保持极化质子束团极化率,电子环eRing采用跑道形环设计方案,可以更好地利用隧道空间。该装置电子束流能量中心值为3.5 GeV,电子束RMS发射度为水平方向60 nm·rad,垂直方向60 nm·rad,对撞点b函数为水平方向0.4 m,垂直方向0.12 m;质子束流能量中心值20 GeV,质子束RMS发射度为水平方向300 nm·rad,垂直方向180 nm·rad,对撞点b函数为水平方向0.08 m,垂直方向0.04 m,设计亮度2×1033 cm–2s–1。EicC采用双对撞区非对称光学设计,通过对EicC不同色品补偿方案的研究,最终确定了弧区加短直线节共同补偿的色品补偿方案;通过研究对撞点处b函数以及对撞点间相移对动力学孔径的影响,最终得到pRing动力学孔径大于8 s(s为束团RMS尺寸)、eRing动力学孔径大于20 s,满足大于束团尺寸6 s的要求。     

Sonoelectrochemical hydrogenation of safrole: A reactor design,statistical analysis and computational fluid dynamic approach

In this work, ultrasound-assisted electrocatalytic hydrogenation (US-ECHSA) of safrole was carried out in water medium, using sacrificial anode of nickel. The ultrasonic irradiation was carried out at frequency of 20 kHz ± 500 Hz with a titanium cylindrical horn (MS 73 microtip; Ti-6AI-4V alloy; 3.0 mm diameter). The optimal conditions were analyzed by statistical experimental design (fractional factorial). The influence of the sonoelectrochemical reactor design was also investigated by using computational fluid dynamics as simulation tool. Among the five parameters studied: catalyst type, use of β-cyclodextrin as inverse phase transfer catalyst, sonoelectrochemical reactor design, ultrasound mode and the temperature of the solution, only the last three were significant. The hydrogenation product, dihydrosafrole, reached 94% yield, depending on the experimental conditions applied. Data of computational fluid dynamics showed that a wing shape tube added to the sonoelectrochemical reactor can work as a cooling apparatus, during the electrochemical process. The reactional solution temperature diminishes 14 °C when compared to the four-way-type reactor. Cooper cathode, absence of β-cyclodextrin, four-way-type reactor, ultrasound continuous mode (14 W) and absence of temperature control were the most effective reaction parameters for the safrole hydrogenation using US-ECHSA method. The proposed approach represents an important contribution for understanding the hydrodynamic behavior of sonoelectrochemical reactors designs and, consequently, for the reducing of the experimental costs inherent to the sonoelectrochemical process.     

Mechanistic model for the dielectric spectrum of a simple dielectric material

ABSTRACT

In this paper, we perform molecular dynamics simulations of a dielectric fluidic material composed of permanent molecular dipoles. The dielectric spectrum features two peaks at lower frequencies than the system phonon frequency. The primary peak is observed at all temperatures studied and shifts toward lower frequencies as the temperature decreases. During this shift, the secondary peak emerges with a higher peak frequency than the primary peak. The secondary peak amplitude increases as the temperature decreases. Both peaks are dependent on the wavevector; in the small wavevector regime, the primary peak is shifted to higher frequencies as the wavevector squared and the secondary peak amplitude increases as the wavevector increases, but shows no shift in frequency. From the polarisation balance equation, we propose a model for the dielectric spectrum. This captures the spectrum features, and we conjecture that the primary peak is due to dipole moment correlations (Debye-type) and the secondary peak is due to the correlation between the dipole moment and a microscopic local field.     

Triple Self‐Sorting in Constitutional Dynamic Networks: Parallel Generation of Imine‐Based CuI,FeII, and ZnII Complexes

Three imine‐based metal complexes, having no overlap in terms of their compositions, have been simultaneously generated from the self‐sorting of a constitutional dynamic library (CDL) containing three amines, three aldehydes, and three metal salts. The hierarchical ordering of the stability of the three metal complexes assembled and the leveraging of the antagonistic and agonistic relationships existing between the constituents within the constitutional dynamic network corresponding to the CDL were pivotal in achieving the sorting. Examination of the process by NMR spectroscopy showed that the self‐sorting of the Fe^II and Zn^II complexes depended on an interplay between the thermodynamic driving forces and a kinetic trap involved in their assembly. These results also exemplify the concept of “simplexity”—the fact that the output of a self‐assembling system may be simplified by increasing its initial compositional complexity—as the two complexes could self‐sort only in the presence of the third pair of organic components, those of the Cu^I complex.     

川芎栽培土壤中重金属镉的动态监测

目的：连续多年监测彭州敖平镇川芎药材栽培土壤中重金属镉的含量,分析其对川芎药材中镉含量的影响。方法根据前期研究结果选取敖平镇部分川芎种植地固定采集样品。按照国家标准方法,采取0～20 cm连续根系土柱和川芎药材。采用火焰法对抽样土壤及川芎药材中镉的含量进行检测分析。结果采样区域内土壤中镉含量均符合国家二级土壤环境质量标准;部分土壤中镉的含量呈明显增长趋势。结论川芎种植土壤中镉含量与环境有较高关联,水泥厂粉尘等污染源是土壤中镉含量增加的重要来源。     

Molecular and conformational properties of comb-like polymers with ionically bound side chains studied in organic solvent

Conformational and dynamo-optical properties of a homologous series of poly(cetyltrimethylammonium 2-acrylamido-2-methylpropane sulfonates) with molecular masses ranging from 80 to 700?kDa were studied in chloroform solutions by viscometry, dynamic light scattering, sedimentation, and flow birefringence. The Mark–Kuhn–Houwink Equations for this polymer in chloroform were obtained; the values of hydrodynamic diameter and the Kuhn segment length as well as the value of intrinsic anisotropy of polarizability of the monomer unit were defined.     

基于闭环二苯醚与磷氧基团的主体材料的合成及其在蓝色磷光有机发光二极管中的应用

本文通过多步有机反应制备了化合物9-苯基-9′-（4-二苯基氧化膦）苯基-氧杂蒽[diphenyl（4-（9-phenyl-9H-xanthen-9-yl）phenyl）phosphine oxide,DPPO],低温磷光发射光谱测试表明该化合物具有高的三线态能级（2.88eV）,它可以作为天蓝色磷光发光材料双（4,6-二氟苯基吡啶-N,C2）吡啶甲酰合铱[bis（3,5-difluoro-2-（2-pyridyl）phenyl-（2-carboxypyridyl）iridium（Ⅲ）,FIrpic,ET=2.62eV]的主体材料.将主体材料DPPO用于蓝色磷光有机发光二极管中,该器件在100cd/m2的亮度下,电流效率和流明效率分别达到30.6cd/A和19.2lm/W,最大外量子效率达到13.6%.     

A NOVEL ZWITTERIONIC SILANE COUPLING AGENT FOR NONTHROMBOGENIC BIOMATERIALS

A novel silane coupling agent bearing sulfobetaine group, N,N-diethyl-N-（3-sulfopropyl）-aminopropyl- trimethoxysilane （DESATS）, was first designed, synthesized and characterized. Its solution property was studied by means of dynamic light scattering. DESATS was successfully bonded onto the surface of the glass and proved by ESCA. Platelet adhesion assay in vitro indicated that the nonthrombogenicity of glass slide modified with DESATS is greatly improved.     

仪器定量分析中几个问题的探讨

详细介绍了分析方法的评价指标,包括检出限、测定限、灵敏度、精密度、准确度、动态范围和线性范围、抗干扰能力等,单因素优化方法与加标回收实验评定测定结果准确度的可靠性,并就分析工作中遇到的一些实际问题进行了讨论.     

中心直裂纹平台巴西圆盘复合型动态断裂实验研究

制作了中心直裂纹平台巴西圆盘（cracked straight through flattened Brazilian disc-CSTFBD）试样,利用分离式霍普金森压杆（split Hopkinson pressure bar-SHPB）加载,进行了岩石纯Ⅰ型和复合型（Ⅰ＋Ⅱ型）动态断裂实验。由于加载角（载荷方向与裂纹线的夹角）在制作试样时已经通过裂纹线与试样平台的位置关系确定,因此在实验中可以方便而准确地实施加栽。比较了纯Ⅰ型加载和复合型加载下压杆上记录的入射波、反射波和透射波的波形。采用实验与数值相结合的方法,将实验得到的动态载荷输入有限元程序,得到了纯Ⅰ型试样的动态断裂韧度和复合型试样的两种动态应力强度因子的时间历程。计算了加载角为15°的试样应力强度因子的复合比（KI（t）／KⅡ（t））,此计算值与文献结果吻合较好,验证了实验方法的有效性。