The nonlinear optical response of a fluorine-containing azoic dye

The nonlinear optical nonlinearities of a fluorine-containing azoic dye in tetrahydrofuran have been investigated by using Z-scan technique with picosecond and nanosecond lasers. The experimental results reveal that the azoic dye has large optical nonlinearity under the excitations of picosecond and nanosecond 532 nm. At the picosecond 532 nm the solution presents negative nonlinear refraction due to the electronic effect, while the larger nonlinear refraction under nanosecond laser excitation is induced by thermal effect. Moreover, the different nonlinear absorption behavior under picosecond and nanosecond excitations is analyzed.     

锐钛矿相TiO2纳米管的制备及其染料敏化太阳电池

以商用金红石相TiO₂粉末为原料,通过在碱性溶液中150℃水热48h的方法合成TiO₂纳米管.采用SEM,TEM,XRD分析手段对TiO₂纳米管的形貌和结构演变进行了表征.制成的TiO₂纳米管与TritonX-100,乙酰丙酮混合后,通过丝网印刷的方法涂敷到ITO导电玻璃衬底上,并且在450℃下烧结30min后得到可应用于染料敏化太阳电池的多孔光阳极.将此光阳极浸泡于N719染料敏化后,与镀铂对电极组装电池,两者之间灌 关键词： 2纳米管')" href="#">TiO₂纳米管 染料敏化太阳电池 水热法     

The design of a peptide linker group to enhance the SERS signal intensity of an atto680 dye‐nanoparticle system

The Surface enhanced resonance Raman spectroscopy (SERRS) spectra of three modified atto680 dyes were recorded using Au nanoparticles and an excitation laser operating at 670 nm. The dyes were modified with linker groups based on the small peptides, Cys, Cys–Gly and Cys–Gly–Gly. The Cys thiol group acted as the coupling point to the Au surface and the Gly  NH₂ group used to attach the dye. The maximum signal was recorded for the Cys–Gly linker. This gave a signal intensity for the 577 cm⁻¹ Raman peak of the atto680 dye that was more than 27 times greater than the unmodified dye. The Au nanoparticles used had a diameter of 49.8 ± 1.2 nm and were synthesised by the citrate reduction method. The Raman dye‐AuNP probes were also used in an immunoassay to detect mouse IgG in the femto mole range. Copyright © 2010 John Wiley & Sons, Ltd.     

Excition dynamics in the J-aggregates of a carbocyanine dye

We report on the exciton dynamics in the J-aggregating dye 5,5, 6,6-tetrachloro-1,1-diethyl-3,3-di(4-sulfobutyl)-benzimidazolocarbocyanine which is known readily to form J-aggregates, even at room temperature and at a low concentration. We performed a series of time-correlated singlephoton-counting experiments at different emission wavelengths and at different temperatures in the range between 1.5 and 125 K. Additionally, the temperature dependence of the relative fluorescence quantum yield was determined.     

Hair dye distribution in human hair by ToF-SIMS

A single hair sample preparation protocol modified from reported method was developed and used to prepare longitudinally sectioned hair for ToF-SIMS analysis. Preliminary results demonstrate that ToF-SIMS is capable of providing molecular distribution of fragment ions from intrinsic constituents as well as external chemicals like the hair dye ingredients used in this study. The observation of pPDA and H₂PO₄⁻ penetrating into the internal region of hair might initiate a renewed interest in exposure study.     

Specificity of Cyanine Dye L-21 Aggregation in Solutions with Nucleic Acids

Optical spectroscopy experiments were used to study the features of cyanine dye 3,3′-dimethyl-9-(2-thienyl)-thiacarbocyanine iodide (L-21) aggregation in binary solutions DMF:Tris–HCl buffer (pH = 8) containing nucleic acids (DNA or RNA). The appearance of absorption and luminescence bands associated with J-aggregates and dimers that are formed within the minor groove of DNA has been observed. The model of L-21 J-aggregate structure is proposed. It has been found that dimers are the building blocks of L-21 J-aggregates. Disorientation in dimers caused by the minor groove curvature is reason of observation of Davydov splitting in absorption spectrum of L-21 J-aggregates. In the solution containing DNA the absorption and luminescence bands of L-21 J-aggregates exhibit the specific properties that allows the dye L-21 to be used as a fluorescent probe for DNA detection.     

Premicellar and micelle formation behavior of aqueous anionic surfactants in the presence of triphenylmethane dyes: protonation of dye in ion pair micelles

The premicellar and micelle formation behaviors of four cationic triphenylmethane dyes, viz, Pararosaniline (RN), Crystal violet (CV), Ethyl violet (EV), and Malachite green (MG), in aqueous anionic surfactant solutions of sodium dodecyl sulfate (SDS), sodium dodecyl benzene sulfonate (SDBS), and sodium dodecyl sulfonate (SDSN) have been studied by spectral and surface tension measurements. The study was carried out within a pH range where the dyes are stable in their quinoid forms. The dyes have been found to form dye–surfactant ion pairs (DSIPs) with the surfactants, at the surfactant concentrations well below their critical micelle concentration, CMC*. The DSIPs behave like nonionic surfactants and form an air–water interfacial monolayer. The DSIPs have a lower critical micelle concentration (CMC_IP), greater efficiency, and lower effectiveness than the corresponding pure surfactants. As the surfactant concentration is increased below the CMC*, the DSIPs start forming micelles of their own where the dye gets protonated and exists as a protonated dye–surfactant ion pair (PDSIP) in the ion pair micelles. As the concentration of the surfactant exceeds the CMC* of the pure surfactant, the protonation reverses gradually with the dye remaining in the micelles in solubilized form and the DSIPs in the air–water interfacial monolayer are replaced by pure surfactants. The distorted helical isomeric form (isomer B) of the dyes is favored in the PDSIPs. Copyright © 2009 John Wiley & Sons, Ltd.     

Photo-physical properties and amplified spontaneous emission of a new derivative of fluorescein

The synthesis of new high-performance dyes and the implementation of new ways of incorporating the organic molecules into the solid host matrices have produced a great deal of activity in the field of solid-state dye lasers. In this article, the new laser dye, 2-(6-allyl-3-oxo-3H-xanthen-9-yl)-benzoic acid ethyl ester [AXBE] has been synthesized, and its chemical structure was confirmed by ¹H NMR, ¹³C NMR, IR and elemental analysis. This new dye was covalently bonded with methyl methacrylate (MMA) and 2-hydroxy ethyl methacrylate (HEMA) copolymer backbone and evaluated as the active medium of the solid-state laser dye. Its optical properties were experimentally investigated. Amplified spontaneous emission (ASE) and photostability were studied by pumping the dye sample with 355 nm (8 ns) pulsed Nd-YAG laser.     

Enhancing Tris(pyrazolyl)borate-Based Models of Cysteine/Cysteamine Dioxygenases through Steric Effects: Increased Reactivities,Full Product Characterization and Hints to Initial Superoxide Formation

The design of biomimetic model complexes for the cysteine dioxygenase (CDO) and cysteamine dioxygenase (ADO) is reported, where the 3-His coordination of the iron ion is simulated by three pyrazole donors of a trispyrazolyl borate ligand (Tp) and protected cysteine and cysteamine represent substrate ligands. It is found that the replacement of phenyl groups—attached at the 3-positions of the pyrazole units in a previous model—by mesityl residues has massive consequences, as the latter arrange to a more spacious reaction pocket. Thus, the reaction with O₂ proceeds much faster and afterwards the first structural characterization of an iron(II) η²-O,O-sulfinate product became possible. If one of the three Tp-mesityl groups is placed in the 5-position, an even larger reaction pocket results, which leads to yet faster rates and accumulation of a reaction intermediate at low temperatures, as shown by UV/Vis and Mössbauer spectroscopy. After comparison with the results of investigations on the cobalt analogues this intermediate is tentatively assigned to an iron(III) superoxide species.     

Preparation of MnO2 Loaded Hydrothermal Carbon-coated Electrospun PAN Fiber Membranes for Highly Efficient Adsorption and Separation of Cationic Dye

Hydrothermal carbonaceous materials and MnO₂ have been proved to be promising adsorbents to remove organic dyes from wastewater. In this study, flexible MnO₂ loaded hydrothermal carbon-coated electrospun poly-acrylonitrile(AC/MnO₂/PAN) fiber membranes were fabricated by a facile one-step hydrothermal method and activated by NaOH solution. The composite fibers exhibited large adsorption capacity toward cationic dyes and excellent mechanical properties. The adsorption performance can be fitted well with pseudo-second-order model and Langmuir isotherm model. The maximum adsorption for methylene blue(MB), methyl violet(MV) and malachite green(MG) are 1173.27,1106.31 and 1129.89 mg/g, respectively, according to Langmuir fitting. The AC/MnO₂/PAN fiber membrane also showed satisfactory performances for selective adsorption and recyclability. In addition, based on selective adsorption, the AC/MnO₂/PAN fiber membranes that are repulsive to the anionic dye methyl orange(MO) can separate the MB/MO mixture solution by dynamic filtration. Thus, this work not only provides a facile strategy to fabricate large capacity adsorbents, but also demonstrates the potential applications in the dye wastewater treatment field.