A novel, environmentally friendly dispersive liquid-liquid microextraction procedure for the determination of copper

A novel, simple and environmentally friendly procedure for copper determination has been developed. The method is based on the formation of an ion associate of Cu(I) with 1,3,3-trimethyl-2-[5-(1,3,3-trimethyl-1,3-dihydroindol-2-ylidene)-penta-1,3-dienyl]-3H-indolium (DIDC) in the presence of chloride ions as ligand, followed by dispersive liquid-liquid microextraction (DLLME) of the formed ion associate into organic phase and UV-Vis spectrophotometric detection. The following experimental conditions were used: pH 3, 0.24 mol L^− 1 chloride ions, 0.06 mmol L^− 1 DIDC. The effect of the nature of the extraction solvent, auxiliary solvent and disperser solvent used was studied. A mixture of amyl acetate, tetrachloromethane, and methanol in a 1:1:3 v/v/v ratio was selected for the DLLME procedure. The absorbance of the coloured extracts at 640 nm wavelength obeys Beer's law in the range 0.020-0.090 mg L^− 1 of Cu. The limit of detection calculated from a blank test (n = 10) based on 3s is 0.005 mg L^− 1 of Cu. The developed procedure was applied to the analysis of water samples. The suggested DLLME is compared with two procedures previously reported from our laboratory based on (1) conventional liquid-liquid extraction, and (2) sequential injection extraction performed in a dual-valve sequential injection system. The advantages and disadvantages of each method are discussed.     

Four spectrophotometric methods for determination of nitrofurazone in pharmaceutical formulations

Four simple and sensitive visible spectrophotometric methods (A-D) for the determination of nitrofurazone in bulk samples and pharmaceutical formulations are described. They are based on the formation of colored species by treating either its reduction product with 3-methylbenzothiazolin-2-one hydrazone in the presence of ferric chloride (method A: _max 600 nm) or its hydrolysis product with thiobarbituric acid (method B: _max 520 nm, 440 nm) or barbituric acid (method C: _max 400 nm) or by oxidizing it with excess N-bromosuccinimide and determining the consumed NBS using metol-isonicotinic acid hydrazide (method D: _max 620 nm).     

双显色剂高灵敏协同显色反应的研究——钼-溴邻苯三酚红-乙基紫体系

本文研究了在聚乙烯醇存在下,钼(Ⅵ)与溴邻苯三酚红和碱性染料-乙基紫产生的协同显色反应。探讨了利用协同显色反应进行分光光度测定痕量钼的可能性。在乙酸介质中,钼(Ⅵ)与溴邻苯三酚红和乙基紫形成[EV]₃[MoO₂(BPR)]离子缔合型配合物,其吸收峰位于535nm,相应试剂(BPR+EV)的吸收峰则位于640nm。摩尔吸光系数e₅₃₆=1.70×10⁵L·mol^-1·cm^-1。双峰双波长法可使灵敏度倍增。Δε_535～640=3.20×10⁵L·mol^-1。钼含量为0～0.16^μg/mL时,吸光度遵守比尔定律。桑德尔灵敏度(S)为0.00057μg/cm²。反应具有较高的选择性,除锗、钛、钨、钒有较严重干扰以外,其它常见金属离子不干扰钼的显色。根据配合物的组成,推测了它的可能结构。     

BP网络光度法测定去痛片中的四组分

应用Levenberg-Marquardt优化算法的BP网络,采用紫外分光光度法测定去痛片中四组分的含量。测定低含量组分咖啡因和苯巴比妥时,结合吸光度减法技术。氨基比林、非那西丁、咖啡因和苯巴比妥的平均回收率和RSD分别为99.3%,1.2%：;100.0%,1.1%;100.3%,1.5%;100.1%,1.3%。     

Simultaneous 2nd Order Derivative Spectrophotometry Determination of Sorbic and Benzoic Acids in Soft Drinks

Abstract

A method is developed for the simultaneous 2nd order spectrophotometric determination of 1 to 7 μg.mL^?1 of each of benzoic and sorbic acids in non vegetal soft drinks, using a blank prepared from the same soft drink to be analyzed in order to avoid the interferece from other additives and colouring matter present.     

Ethanol as a Solvent in the Determination of Arsenic in Marine Extracts by Atomic Absorption Spectrophotometry

Abstract

Arsenic is determined in aqueous solutions produced from marine raw materials by atomic absorption spectrophotometry. Conversion of the aqueous extract to an ethanol-extract increases the sensitivity of determination by a factor of 4 to 5. The method is applied to some selected samples produced from marine raw materials.     

Second-Derivative Spectrophotometric Determination of Some Benzenoid Drugs

Abstract

A rapid second-derivative spectrophotometric assay procedure has been described for the determination of some benzenoid drugs in pharmaceutical dosage forms. Spectral interference from formulation excipients in simple uv spectrophotometric methods has been eliminated by the application of the proposed method. The different assay parameters, linearity and precision of the method have been assessed. The assay results obtained for eight batches of the pharmaceutical formulations of these drugs are in accord with the declared amounts. The high specificity, ease and simplicity offered by second-derivative spectrophotometry permit unit dose assay of these formulations.     

紫外分光光度法测定氯氟吡氧乙酸十二酯的研究

以甲醇作为溶剂,用紫外分光光度法测定氯氟吡氧乙酸十二酯的含量,测得氯氟吡氧乙酸十二酯对照品溶液浓度在12.0～20.0μg/mL范围之内线性关系良好,其线性方程为A=0.0815C+0.0318(R2=0.9832).平均回收率为90.86%,RSD为5.3%(n=6),结果说明方法简便、灵敏、准确,重现性好.     

钼蓝分光光度法测定纯金中的硅

建立了钼蓝分光光度法测定纯金中硅量的方法。确定了基体的分离方法、分离条件、还原剂及其用量;考察了酸度,试剂等对测定的影响。在优化条件下对3个合成试样进行了测定,RSD10%。方法的回收率在97%~122%之间,满足测定的要求。方法适用于0.001%~0.005%的硅量的测定。     

Bioactive constituents of Iris hybrida (Iridaceae): Processing effect

Iris genus plants are a valuable source of bioactive compounds, which are an important component for pharmaceutical development. The present article shows the potential for mineral nutrition with application of magnesium sulfate, iron chelates and potassium oxide affecting the phenolic compound contents in Iris hybrida ‘Tsikavynka’, I. hybrida ‘Tambo’ and I. hybridа ‘Widecombe Fire’. The effect of mineral processing was specific to plant organs and varied in the component composition. The Iris rhizomes had an increased total phenolic compound content after treatment (up to 10% of the total isoflavonoid content, up to 8% of phenolic acids, up to 5% of γ-pyrones and up to 13% of flavonoids), determined using UV–vis spectroscopy. A positive effect of nutrition on the biosynthesis and content of individual isoflavonoids (tectoridin, nigricin d -glucoside, genistin, iristectorigenin B, nigricin, irigenin and irisolidone) and xanthone mangiferin in Iris rhizomes by HPLC was established. In addition, an increase in the chlorogenic acid amount in Iris leaves was noted. The results demonstrate the sensitivity of Iris phenylpropanoid metabolism to mineral nutrition and can be used to predict medical plant cultivation with increased content of bioactive constituents.