Double-stranded ladderphanes with C2-symmetric planar chiral ferrocene linkers

Eight ladderphanes with C₂-symmetric planar chiral ferrocene linkers are synthesized by ring opening metathesis polymerization of bisnorbornene monomers using Grubbs-I catalyst. The aminobenzoate in both monomers and polymers shows absorption maximum around 320 nm. Both monomers and polymers are Circular dichroism (CD) active. Little enhancements of CD profiles around 320 nm are observed for ladderphanes having chiral chloro- or phenyl-substituted ferrocene linkers. However, ladderphanes with a phenyl substituent on the cyclopendienyl ring exhibits enhancement of CD curves aound 240–300 nm. The congested phenyl moieties in adjacent linkers in this polymer might be well oriented such that interactions between these aromatic substituents on different monomeric units might provoke the enhancement of the CD curves in this region. When the methyl-substituted cyclopendienyl ligand is used for chiral ferrocene linkers, the ladderphanes exhibit two-fold enhancement of CD spectrum around 320 nm. This enhancement is further increased when the cyclopentadienyl ligand contains an additional phenyl substituent, owing to exciton coupling between aminobenzoate moieties in adjacent monomeric units. Moreover, the intensity of the CD curves in the region of 240–300 nm is significantly increased. These results suggest that the later polymer may adopt a posible helical structure. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2999–3010     

气相二氧化硅填充极性低聚物的界面与流变

气相二氧化硅(FS)/低聚物纳米复合材料应用广泛于涂料、胶黏剂、锂离子电池、液体防弹衣等诸多领域.然而,极性低聚物与FS表面相互作用复杂,FS/低聚物复合材料(ONCs)的流变响应多种多样.如何实现ONCs流变行为调控,是长期困扰工业界的难题.本文详细总结了FS在ONCs领域的应用,将FS粒子间相互作用与ONCs流变性质相关联,综述ONCs界面层结构的表征、调控手段及界面层与流变行为的关系.结合本课题组对FS/极性低聚物体系界面及流变行为的研究成果,提出未来ONCs领域的2个重要方向,即研究界面结构与粒子-极性低聚物相互作用间的关系,并通过界面设计实现对纳米粒子/极性低聚物复合材料的流变行为的精确调控.     

带有端烷烃链的超支化聚酯的受限结晶及动态黏弹行为

以三羟甲基丙烷(TMP)为核,二羟甲基丙酸(DMPA)为支化单体,通过熔融缩聚法合成了第3代端羟基脂肪族超支化聚酯,并用十八酸对其进行端基改性,采用广角X射线衍射(WAXD)、示差扫描量热分析(DSC)及红外光谱(FTIR)研究了不同端基改性程度的超支化聚酯的结晶熔融行为及端烷烃链的构象和堆积结构随温度的变化,采用旋转流变仪研究了端烷烃链对脂肪族超支化聚酯熔体动态黏弹行为的影响.结果表明,这类改性超支化聚酯的结晶归因于长链端烷烃的有序排列,改性程度越高,衍射峰强度越大.受限结晶的端烷烃链在升温后并不能完全转变为无序的结构状态,改性超支化聚酯在"熔点"以上仍有部分有序结构存在.超支化聚酯的线性黏弹区随着端基改性程度的增大而逐渐变短,超支化聚酯的弹性逐渐增大,剪切变稀越明显.动态流变测试中所出现的现象与改性超支化聚酯中端烷烃链的受限密切相关.     

双活性磺酸基蔗渣木聚糖对羟基苯甲酸酯的合成及活性模拟

以蔗渣木聚糖(BX)为主要原料、氨基三磺酸钠为酯化剂,在一步酯化合成磺酸基蔗渣木聚糖酯的基础上,利用磺酸基蔗渣木聚糖酯和对羟基苯甲酸进行二步酯化反应,合成了磺酸基蔗渣木聚糖对羟基苯甲酸酯,并考察了反应条件对酯化反应的影响,通过单因素实验确定了第二步酯化反应较佳的合成工艺条件.蔗渣木聚糖酯化改性前后的样品分别用FT-IR,DG-DTG和XRD进行了表征,并对该双酯化衍生物的分子进行了优化与活性模拟.结果表明:FT-IR证明双酯化产物含有磺酸基团和对羟基苯甲酸酯基团,TG-DTG分析表明该双酯化衍生物的热稳定性提高,XRD说明发生双酯化改性后分子排列的规整性提高,结晶度增加;活性模拟实现了磺酸基蔗渣木聚糖对羟基苯甲酸酯与艾滋病毒的对接.     

AAO辅助三唑亚铁纳米材料:一维限制生长和二维表面成膜及自旋转换性能

通过连续多步自组装的方式分别将三唑亚铁（SCO1）和氨基三唑亚铁（SCO2）自旋转换纳米材料生长于氧化铝模板（AAO）的孔道内和表面上。利用扫描电镜（SEM）、红外光谱（IR）、粉末X射线衍射（PXRD）、拉曼光谱（Raman）等手段对SCO1-1D+2D和SCO2-1D+2D纳米材料进行表征,SEM表明随着自组装时间的增加,球状的SCO纳米颗粒生长于AAO孔道内,并逐渐形成1D的纳米结构,而在AAO表面则形成致密均匀的SCO-2D薄膜。两种SCO-1D+2D纳米粒子都具有两步自旋行为（SCO1-1D+2D：T_c1↑=319 K,T_c1↓=313 K,T_c2↑=381 K,T_c2↓=340 K;SCO2-1D+2D：T_c1↑=181 K,T_c1↓=155 K,T_c2↑=246 K,T_c2↓=233 K）。对相应的SCO-1D和SCO-2D磁性结果表明,两步自旋转换行为的产生是由于SCO组装体形貌的差异。其中,低温区的自旋转换行为是由生长于AAO表面的SCO-2D自旋转换性能所致,而发生在更高温度的第二阶段的自旋转换行为则归因于生长于AAO孔道内的SCO-1D的自旋转换性能。     

The Origin of Hierarchical Structure Formation in Highly Grafted Symmetric Supramolecular Double‐Comb Diblock Copolymers

Involving supramolecular chemistry in self‐assembling block copolymer systems enables design of complex macromolecular architectures that, in turn, could lead to complex phase behavior. It is an elegant route, as complicated and sensitive synthesis techniques can be avoided. Highly grafted double‐comb diblock copolymers based on symmetric double hydrogen bond accepting poly(4‐vinylpyridine)‐block‐poly(N‐acryloylpiperidine) diblock copolymers and donating 3‐nonadecylphenol amphiphiles are realized and studied systematically by changing the molecular weight of the copolymer. Double perpendicular lamellae‐in‐lamellae are formed in all complexes, independent of the copolymer molecular weight. Temperature‐resolved measurements demonstrate that the supramolecular nature and ability to crystallize are responsible for the formation of such multiblock‐like structures. Because of these driving forces and severe plasticization of the complexes in the liquid crystalline state, this supramolecular approach can be useful for steering self‐assembly of both low‐ and high‐molecular‐weight block copolymer systems.     

Mechanochemical synthesis of dodecyl sulfate anion (DS−) intercalated Cu-Al layered double hydroxide

Dodecyl sulfate anion (DS⁻) was successfully intercalated into the gallery space of Cu-Al layered double hydroxides (LDH) by a non-heating mechanochemical route, in which basic cupric carbonate (Cu₂(OH)₂CO₃) and aluminum hydroxide (Al(OH)₃) were first dry ground and then agitated in SDS solution under ambient environment. The organics modified Cu-Al LDH showed good adsorption ability toward 2,4-dichlorophenoxyacetic acid (2, 4-D). The prepared samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), CHS elemental analysis and Scanning electron microscopy (SEM). The LDH precursor prepared by ball-milling could directly react with SDS molecules forming a pure phase of DS⁻ pillared Cu-Al LDH, which was not observed with the LDH product through the ion-exchange of DS⁻ at room temperature. The process introduced here may be applied to manufacture other types of organic modified composites for pollutants removal and other applications.     

基于个体仿真的机场安检系统优化研究

建立了安检流程的网络流模型,模型中包含了不稳定的乘客到达情形、嫌疑乘客以及反馈机制。分析了安检过程中的瓶颈所在,并给出了相应的优化方案,包括整个安检过程的通行规则,A区和B区内部预检节点与普通节点的适当比例等。仿真结果显示,为了充分利用安检资源并兼顾预检乘客的利益,通行规则应采用连通方案。依照统计数据中计算出的各种参数,在A区预检节点和普通节点比例设置为2∶2,B区预检节点和普通节点比例设置为3∶5的情况下,旅客平均等待时间最短,等待时间的标准差也最小,同时高峰期的通行量也相对较优。进一步分析了不同的文化背景及机场情况。对于美国人和瑞士人,通过改变预检乘客的选择概率来满足他们不同的行为偏好。仿真结果说明,预检乘客选择哪类节点进行安检对平均等待时间、等待时间的标准差和高峰期通行量的影响不大。分析了插队情形,插队对平均等待时间和高峰期通行量几乎没有影响,但当插队比例非常大时,旅客等待时间标准差会增加,影响乘客到达的准确性。最后,针对具体情况提出了一些合理的建议,并给出了进一步的研究计划。     

基于严格α-双链对角占优矩阵的非奇H-矩阵的判定准则

研究了非奇H-矩阵的判定问题.先给出了几个判定严格α-双链对角占优矩阵的充要条件,进一步利用矩阵对角占优理论得到了判定非奇H-矩阵的一些充分条件,推广和改进了已有的相关结果,并用数值算例说明了这些判定方法的有效性.