Fabrication of microporous membranes from melt extruded polypropylene precursor films via stretching: Effect of annealing

In this work, the effects of annealing conditions on the microstructure of polypropylene(PP) precursor films and further on the porous structure and permeability of stretched membranes were investigated. Combinations of WAXD, FTIR, DSC and DMA results clearly showed the crystalline orientation and crystallinity of the precursor film increased with annealing temperature, while the molecular chain entanglements in the amorphous phase decreased. Changes in the deformation behavior suggested more lamellar separation occurred for the films annealed at higher temperatures. Surface morphologies of the membranes examined by SEM revealed more pore number and uniform porous structure as the annealing temperature increased. In accordance with the SEM results, the permeability of the membranes increased with annealing temperature. On the other hand, it was found that 10 min was almost enough for the annealing process to obtain the microporous membranes with an optimal permeability.     

Utilization of Active Ni to Fabricate Pt–Ni Nanoframe/NiAl Layered Double Hydroxide Multifunctional Catalyst through In Situ Precipitation

Integration of different active sites into metallic catalysts, which may impart new properties and functionalities, is desirable yet challenging. Herein, a novel dealloying strategy is demonstrated to decorate nickel–aluminum layered double hydroxide (NiAl–LDH) onto a Pt–Ni alloy surface. The incorporation of chemical etching of Pt–Ni alloy and in situ precipitation of LDH are studied by joint experimental and theoretical efforts. The initial Ni‐rich Pt–Ni octahedra transform by interior erosion into Pt₃Ni nanoframes with enlarged surface areas. Furthermore, owing to the basic active sites of the decorated LDH together with the metallic sites of Pt₃Ni, the resulting Pt–Ni nanoframe/NiAl–LDH composites exhibit excellent catalytic activity and selectivity in the dehydrogenation of benzylamine and hydrogenation of furfural.     

Formation of the Main Cores Present in Natural Products by Tandem Additions

A rapid route to 5,5‐ and 5,6‐ bicyclic systems is provided by an 1,3‐alkyl‐shift process mediated by a hypervalent iodine reagent on aromatics. The structures obtained contain several unsaturations with different behaviors and reactivities. Such diversity allows further elaborations for the rapid formation of compact systems present in a variety of natural products. The potential for further transformations has been demonstrated by performing a double Michael addition. This cyclization process is regio‐ and stereoselective due to the presence of a former benzylic substituent. Furthermore, an extension of this approach has been accomplished on indole derivatives.     

邻位取代基对芳基杂环磷酸盐成核有效性的影响

以2,4-二叔丁基苯酚为原料分别合成2,2'-亚甲基双(4,6-二叔丁基苯基)磷酸钠(NA-1)和2,2'-亚甲基双(4-叔丁基苯基)磷酸钠(NA-2),并将其应用于等规聚丙烯(i PP),研究该类芳基杂环磷酸盐成核剂邻位取代基对其成核有效性的影响.通过红外吸收光谱(FTIR)、核磁共振谱(NMR)、X-Ray多晶粉末衍射(XRD)、扫描电镜分析(SEM)和热分析对其化学结构、凝聚态结构、颗粒形貌和物性特征进行了表征,确定了NA-1和NA-2的分子结构和凝聚态颗粒的结构、形貌和物性特征.利用偏光显微观察(POM)、扫描电镜(SEM)断口分析、示差式扫描量热分析(DSC)和雾度测试分析对其与i PP的复合材料的晶粒结构、结晶行为及宏观光学性能进行测试表征.结果表明,添加量0.2%时,邻位叔丁基(NA-1)的存在可使复合材料球晶尺度更加细密,结晶温度比无邻位叔丁基(NA-2)增加5.1 K,等温结晶速率提高至0.56 w/g是NA-2的7倍,半结晶时间由NA-2的11.55 min下降至2.36 min,邻位叔丁基存在对材料透光率和雾度值的影响分别达到4.3%,7.4%.SEM断口分析表明二者在i PP基体中分散均匀,平均粒径相近分别为0.79μm和0.82μm,粒径分布曲线相近,二者分散分布的差异性不显著.     

一系列由柔性N,N'-双(3-吡啶甲基)胺构筑的螺旋配合物的合成、结构和性质

合成和表征了5个螺旋配位聚合物{[Cu(Hbpma)(H₂O)₄]₂(SO₄)₃·3.5H₂O}_n (1)、{[Ni(Hbpma)(H₂O)₄]₄(SO₄)₆·10.75H₂O}_n (2)、{[Mn(Hbpma)(H₂O)4](SO₄)_1.5·3H₂O}_n (3)、{[Zn(Hbpma)(H₂O)₄]₄(SO₄)₆·4H₂O·4CH₃OH}_n (4)和{[Cu(Hbpma)2(H₂O)₂](SO₄)2·9H₂O}_n (5),其中bpma代表N,N'-双(3-吡啶甲基)胺。晶体结构分析表明配合物1~4为一维链状结构,配合物5为二维层状结构,其中金属离子由质子化的bpma配体桥连。值得注意的是,采取反-反式构象的柔性bpma配体使得配合物1和2为假螺旋链结构,配合物3和4为螺旋链结构,配合物5为螺旋层结构。同时研究了配合物的磁性和热稳定性。     

ZnCr双金属层状材料对废水中酸性红14的吸附性能

采用共沉淀法制备性能优异的层状材料锌铬水滑石(Zn_xCr-LDHs, x=2, 3, 4), 并探究各种因素对吸附酸性红14(AR14)的影响。XRD、ICP、FTIR及BET表征结果表明:合成的Zn_xCr-LDHs晶型良好且稳定, 具备介孔结构。实验结果表明:最佳吸附剂为Zn₃Cr-LDHs, 比表面积为101 m²·g^-1, 对AR14的最大吸附容量为484.63 mg·g^-1。同时, 降低溶液pH值和提高溶液温度均可促进AR14的吸附。该吸附过程分别符合准二级动力学模型和Freundlich等温吸附模型。结合Materials Studio 5.5软件模拟, 推测该吸附机理主要以表面吸附为主, -SO₃^-基团是反应点。     

Exploring Network Formation of Tough and Biocompatible Thiol‐yne Based Photopolymers

This work deals with the in‐depth investigation of thiol‐yne based network formation and its effect on thermomechanical properties and impact strength. The results show that the bifunctional alkyne monomer di(but‐1‐yne‐4‐yl)carbonate ( DBC ) provides significantly lower cytotoxicity than the comparable acrylate, 1,4‐butanediol diacrylate ( BDA ). Real‐time near infrared photorheology measurements reveal that gel formation is shifted to higher conversions for DBC /thiol resins leading to lower shrinkage stress and higher overall monomer conversion than BDA . Glass transition temperature (T_g), shrinkage stress, as well as network density determined by double quantum solid state NMR, increase proportionally with the thiol functionality. Most importantly, highly cross‐linked DBC /dipentaerythritol hexa(3‐mercaptopropionate) networks (T_g ≈ 61 °C) provide a 5.3 times higher impact strength than BDA , which is explained by the unique network homogeneity of thiol‐yne photopolymers.

     

A Facile Method to Prepare Double‐Layer Isoporous Hollow Fiber Membrane by In Situ Hydrogen Bond Formation in the Spinning Line

A double‐layer hollow fiber is fabricated where an isoporous surface of polystyrene‐block‐poly(4‐vinylpyridine) is fixed on a support layer by co‐extrusion. Due to the sulfonation of the support layer material, delamination of the two layers is suppressed without increasing the number of subsequent processing steps for isoporous composite membrane formation. Electron microscope‐energy‐dispersive X‐ray spectroscopy images unveil the existence of a high sulfur concentration in the interfacial region by which in‐process H‐bond formation between the layers is evidenced. For the very first time, our study reports a facile method to fabricate a sturdy isoporous double‐layer hollow fiber.

     

An Effective Asphalt UV Blocking Material Based on Host‐Guest Schiff Base/Layered Double Hydroxides

The development of asphalt‐based UV blocking materials is important to extend the alphalt lifespan in road construction. In this work, we put forward that the fabrication of host‐guest system can be an effective way to obtain UV blocking materials. Firstly, a new anionic Schiff base, N ,N' ‐bis(salicylidine)‐4,4'‐diaminostilbene‐2,2'‐disulfonic acid (SDSD ), has been synthesized, which was intercalated into Zn‐Al‐LDH by anion‐exchange method. FT‐IR and XRD illustrate the layered organic–inorganic composite, Zn‐Al‐SDSD‐LDH , has been successfully synthesized with high crystallinity. Laser particle size analyzer, SEM and TEM show that particle size distributions of Zn‐Al‐SDSD‐LDH is in the range 100–500 nm. UV –vis absorption spectra show that Zn‐Al‐SDSD‐LDH has better UV absorption than the pristine Zn‐Al‐LDH and SDSD . Furthermore, the mixture of asphalt and 3 wt% Zn‐Al‐SDSD‐LDH presents enhanced UV blocking property relative to the pristine asphalt after irradiating by UV spray accelerated weathering test. Therefore, this work not only develops a new type of host‐guest Zn‐Al‐SDSD‐ LDH , but also confirms it can be an effective asphalt UV blocking material for practical application.