Glykosylazide als Ausgangsbasis zur Gewinnung von Nucleosidanalogen, 3. Mitt. Synthese von Alkylaminotetrazol- und Uretidinonnucleosiden

The -ribofuranosylazide1 is transformed after usual derivatization by suitable protecting groups into the P–N-ylid2, which gives the corresponding N-Glykosyl-N-alkylcarbodiimides4 and a small amount of the glykosylisocyanatde-rivative3 by reaction with alkylisocyanates. The carbodiimides4 were reacted with hydrazoic acid to give the alkylaminotetrazolnucleosides5 and finally the free nucleosidanalogs6. In the case of5 c the 5-aziridinyltetrazolnucleosid5 h was formed by an usual neighbouring group reaction. In addition the compound1 is transformed into the 3,5-diprotected anchor derivative7 by reaction withTIPSCl₂. The latter could be transformed by usual steps into the alkylaminotetra-zolnucleosides8 with a free 2-OH group. In the next step the 2-p-tolylthiocarbo-nates9 were prepared followed by transformation to the 2-desoxynucleosides10 by means of tributyltinhydride. Finally the free 2-desoxynucleosides11 were prepared. By reacting the carbodiimides4 with phenylisocyanate a mixture of the two possible regiouretidinonnucleosidderivatives12 and13 are formed. In the case of the N-glykosyl-N-allylcarbodiimide4 d only the one isomer13 d arises.

Herrn Prof. Dr.A. Neckel mit den besten Wünschen zum 60. Geburtstag gewidmet.     

分子力场进展

分子力学（简称ＭＭ）是近年来化学家常用的一种计算方法。与量子力学从头计算和半经验方法相比，用分子力学处理大分子可以大大节省计算时间，而且，在大多数情况下，用分子力学方法计算得到的分子几何构型参数与实验值之间的差值可在实验误差范围之内。所以，分子力学是研究生物化学体系的有效和可行的手段。分子力学的核心是分子力场。本文介绍了分子力场的量子力学背景、分子力场和光谱力场之间的关系。分子力场的一般形式、分力     

Interaction of polyfluoroalkyl-containing aziridinyl ketones with hydrogen halides

Polyfluoroalkyl-containing aziridinyl ketones, unlike their nonfluorinated analogs, react with hydrogen halides to give only -halo- -anvnoketones or their hydrogen halide salts. Thermal decomposition of the latter in the case where Hal = CI affords -chlorovinyl ketones.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 684–686, March, 1996.     

Structure determination of zinc iodide complexes formed in aqueous solution

Structures of the complexes formed in aqueous solutions between zinc(II) and iodide ions have been determined from large-angle X-ray scattering, Raman and far-IR measurements. The coordination in the hydrated Zn²⁺ hexaaqua ion and the first iodide complex, [ZnI]⁺, is octahedral, but is changed into tetrahedral in the higher complexes, [ZnI₂(H₂O)₂], [ZnI₃(H₂O)]^– and [ZnI₄]^2–. The Zn-I bond length is 2.635(4)Å in the [ZnI₄]^2– ion and slightly shorter, 2.592(6)Å, in the two lower tetrahedral complexes. In the octahedral [ZnI(H₂O)₅]⁺ complex the Zn-I bond length is 2.90(1)Å. The Zn-O bonding distances in the complexes are approximately the same as that in the hydrated Zn²⁺ ion, 2.10(1)Å.     

C207联醇催化剂的羰基硫中毒研究

以常压甲醇分解反应为基础实验测定了不同羰基硫含量和不同反应温度下甲醇合成铜基催化剂活性随时间的变化。结果表明，羰基硫含量增加时；失活速率增快；反应温度升高时，失活速率也加快。羰基硫中毒前后催化剂样品的ＸＲＤ谱图证实了起催化作用的活性组分为Ｃｕ＾＋／ＺｎＯ。应用改进的高斯－牛顿法对失活实验数据进行参数估值，获得了Ｃ２０７铜基催化剂羰基硫中毒的失活速率方程。     

Magnetic microcapsules for targeted delivery of anticancer drugs

To achieve targeted distribution of anticancer drugs with sustained activity, ferromagnetic ethylcellulose microcapsules containing an anticancer drug, mitomycin C (FM-MMC-mc), were prepared by a method based on phase separation principles. Two prototypes of FM-MMC-mc were made: one with the drug as the core and zinc ferrite on its capsular surface (outer type); the other with both the drug and zinc ferrite as the core (inner type). Both preparations provided a sustained-release property and a sensitive response to conventional magnetic force, although certain differences in the release rate of drug, magnetic responsiveness, and particle size were found between the two dosage forms. Animal studies showed that the magnetic microcapsules could be magnetically controlled in the artery and urinary bladder. VX2 tumors in the rabbit hind limb and urinary bladder were successfully treated with magnetic control of FM-MMC-mc. Pharmacokinetic study revealed that the targeting of the microcapsules markedly enhanced the drug absorption into the surrounding tissues for a prolonged period of time. The results indicate the feasibility and effectiveness of the magnetic microcapsules as a targeted drug delivery system.     

Electrochemical vapor generation of selenium species after online photolysis and reduction by UV-irradiation under nano TiO<Subscript>2</Subscript> photocatalysis and its application to selenium speciation by HPLC coupled with atomic fluorescence spectrometry

An online UV photolysis and UV/TiO₂ photocatalysis reduction device (UV–UV/TiO₂ PCRD) and an electrochemical vapor generation (ECVG) cell have been used for the first time as an interface between high-performance liquid chromatography (HPLC) and atomic fluorescence spectrometry (AFS) for selenium speciation. The newly designed ECVG cell of approximately 115 L dead volume consists of a carbon fiber cathode and a platinum loop anode; the atomic hydrogen generated on the cathode was used to reduce selenium to vapor species for AFS determination. The noise was greatly reduced compared with that obtained by use of the UV–UV/TiO₂ PCRD–KBH₄–acid interface. The detection limits obtained for seleno-DL-cystine (SeCys), selenite (Se^IV), seleno-DL-methionine (SeMet), and selenate (Se^VI) were 2.1, 2.9, 4.3, and 3.5 ng mL^–1, respectively. The proposed method was successfully applied to the speciation of selenium in water-soluble extracts of garlic shoots cultured with different selenium species. The results obtained suggested that UV–UV/TiO₂ PCRD–ECVG should be an effective interface between HPLC and AFS for the speciation of elements amenable to vapor generation, and is superior to methods involving KBH₄.     

Ionization energy reductions in small 2,5-dihydroxybenzoic acid-proline clusters

The photoionization of (pro)(n)DHB (pro = proline, DHB = 2,5-dihydroxybenzoic acid, n = 0, 1, 2 or 4) clusters was studied both experimentally and computationally. Experimentally the (pro)(n)DHB clusters are generated in the gas phase by laser desorption and supersonic jet entrainment. The photoionization thresholds are then determined by the mass-selective measurement of both one- and two-color photoionization efficiency curves. These experiments demonstrate that the ionization energies (IEs) of the (pro)(n)DHB clusters are substantially reduced in comparison with the IE of free DHB. Computational studies of the (pro)(n)DHB clusters provide insights into the mechanism of IE reduction. For the (pro)DHB system the IE reduction results from spin delocalization in the ion state of the cluster. In contrast, for the (pro)(2)DHB and (pro)(4)DHB clusters the IE reduction results from an inductive delocalization of electron density from pro to DHB in the ground state of the cluster. This latter effect, which is a result of the specific hydrogen-bonding interactions occurring in the mixed clusters, leads to IE reductions of >1 eV. Finally, determination of the energetics of the (pro)(2)DHB radical cation demonstrate that the DHB-to-proline proton transfer reaction is a barrierless, exoergic process in the ion state and that energetic demands for cluster dissociation to protonated (pro)(2) plus a deprotonated DHB radical are substantially lower than those for cluster dissociation to (pro)(2) plus DHB(+*). Cumulatively, these studies provide new energetic and mechanistic insights into both primary and secondary MALDI ionization processes.     

Solubility and Flory Huggins parameters of SBES, poly(styrene-b-butene/ethylene-b-styrene) triblock copolymer, determined by intrinsic viscosity

Solubility parameter and Flory Huggins interaction parameter of a triblock SBES have been obtained from intrinsic viscosity measurements. The solubility of the block copolymer in all solvents (methyl-cyclohexane, cyclohexane, cyclopentane, toluene and benzene) was found good except in the case of n-hexane. The results obtained are similar to other found in literature for SBR and SBS rubbers, and indicate that cyclohexane and cyclopentane and methylcyclohexane are the most compatible solvents for this kind of polymer.     

TixNy团簇结构的密度泛函研究

采用杂化密度泛函方法(B3LYP)和有效核势基组预测了Ti_xN_y (x≤3, y≤2)团簇的结构及稳定性, 并分析了可能存在构型的电子结构. 结果表明Ti₂N中体系的自旋多重度由Ti原子决定. Ti₃N中随着N的配位数增加, N的负电荷增加, 平均每个Ti向N提供约0.3个电子. 从Ti₂N₂可能稳定构型分析, 成键数目越多, 能量上越有利, 且Ti—N键的数目的增加, 将削弱N—N间的成键.