Distorted wave response of ultrasonic annular stator incorporating non-uniform geometry

The traveling wave ultrasonic stator is normally fabricated with teeth. The tooth geometry improves the driving speed, but it creates natural frequency splitting and mode contamination, especially a distorted traveling wave. A dynamic model of a stepped-plate periodic stator is developed to examine the distortion. The stator is treated as an annular supported by a thin mid plate, and the support stiffness is formulated by using equivalent energy principle. The effects of the tooth and mid plate on the natural frequency and vibration mode are examined by using the perturbation method. The rules governing the frequency splitting, frequency perturbation as well as mode contamination are also identified. The traveling wave response and elliptical trace on stator surface are obtained by using the mode superposition method and they are proved to be distorted due to the tooth geometry. The response at the repeated doublets becomes coupled forward and backward traveling waves, but that at the split doublets becomes coupled forward traveling, standing and backward traveling waves. The results indicate that the tooth mass instead of the stiffness decreases the vibration amplitude and driving speed of the dominant wave, but their effects are different at the repeated and split doublets. Inspection of the model implies that the distortion can be suppressed by using a suitable combination of the wavenumber, tooth count, tooth height and occupying fraction. Numerical calculations are carried out to demonstrate the tooth geometry effect on the transient waveform, driving speed and elliptical trace. The optimization of the tooth geometry that can help achieve a purer traveling wave is discussed.     

DC Electrical Conductivity of the Direct Electrochemically Synthesized Polythiophene Metal Complexes

Electrochemical anodic oxidation of a metal anode in an acetone solution of 2,5-diamino-3,4-dicyanothiophene gave the polythiophene metal complexes of Co, Ni, Cu, Zn, Cd, and Sn. Chemical analyses, as well as FTIR and electronic spectral data, are presented to confirm the formulation of the isolated materials. DC electrical conductivity measurements of the polymer complexes were measured in the range 300–500 K in the annealed and 5% doped forms. The products gave electrical conductivity in the semi-conducting region that increased by heat.     

The Synthesis,Characterization and DC Electrical Conductivity of Polypyrrole‐Zirconium Complex

Polypyrrole‐zirconium complex has been synthesized by reacting 2‐amino‐3,4‐dicyano‐5‐mercaptopyrrole with zirconium nitrate in absolute ethanol under reflux for 24 h. The product has been characterized by elemental analyses, FTIR spectroscopy, in addition to thermal analysis (TGA and DSC) and its solubility has been investigated. The DC electrical conductivity variation of polypyrrole‐zirconium complex has been studied in the temperature range 300–500 K after annealing for 24 h at 100°C and doping with I₂, FeCl₃ and CuCl₂ · H₂O for comparison. An attempt has been made to interpret the DC electrical conductivity behavior and thermal properties to chain length, dopant used, polymer structure and attached groups.     

Transiting the molecular potential energy surface along low energy pathways: The TRREAT algorithm

The Transition Rapidly exploring Random Eigenvector Assisted Tree (TRREAT) algorithm is introduced to perform searches along low curvature pathways on a potential energy surface (PES). The method combines local curvature information about the PES with an iterative Rapidly exploring Random Tree algorithm (LaValle, Computer Science Department, Iowa State University, 1998, TR98–11) that quickly searches high‐dimensional spaces for feasible pathways between local minima. Herein, the method is applied to identifying conformational changes of molecular systems using Cartesian coordinates while avoiding a priori definition of collective variables. We analyze the pathway identification problem for alanine dipeptide, cyclohexane and glycine using nonreactive and reactive forcefields. We show how TRREAT‐identified pathways can be used as valuable input guesses for double‐ended methods such as the Nudged Elastic Band when ascertaining transition state energies. This method can be utilized to improve/extend the reaction databases that lie at the core of automatic chemical reaction mechanism generator software currently developed to build kinetic models of chemical reactions. © 2013 Wiley Periodicals, Inc.     

Comparative assessment of computational methods for the determination of solvation free energies in alcohol‐based molecules

The determination of differences in solvation free energies between related drug molecules remains an important challenge in computational drug optimization, when fast and accurate calculation of differences in binding free energy are required. In this study, we have evaluated the performance of five commonly used polarized continuum model (PCM) methodologies in the determination of solvation free energies for 53 typical alcohol and alkane small molecules. In addition, the performance of these PCM methods, of a thermodynamic integration (TI) protocol and of the Poisson–Boltzmann (PB) and generalized Born (GB) methods, were tested in the determination of solvation free energies changes for 28 common alkane‐alcohol transformations, by the substitution of an hydrogen atom for a hydroxyl substituent. The results show that the solvation model D (SMD) performs better among the PCM‐based approaches in estimating solvation free energies for alcohol molecules, and solvation free energy changes for alkane‐alcohol transformations, with an average error below 1 kcal/mol for both quantities. However, for the determination of solvation free energy changes on alkane‐alcohol transformation, PB and TI yielded better results. TI was particularly accurate in the treatment of hydroxyl groups additions to aromatic rings (0.53 kcal/mol), a common transformation when optimizing drug‐binding in computer‐aided drug design. © 2013 Wiley Periodicals, Inc.     

宽离子能量检测范围垂直引入反射式飞行时间质谱仪的研制

本实验室研制了国内首台宽离子能量检测范围飞行时间质谱仪。仪器采用紧凑式电子轰击源设计,配合离子透镜系统有效的调制离子流,飞行时间质量分析器采用了离子垂直引入式,双场加速和双场反射以及大尺寸MCP检测装置设计。仪器单离子信号半峰宽约2 ns,仪器分辨率优于1600FWHM,检测实际样品质量范围为1~127 amu(仪器理论质量检测上限优于800 amu),可检测离子能量范围优于2个数量级(3~140 eV)。若该TOF质量分析器与短瞬高压脉冲放电离子源耦合联用,可广泛应用于高能离子束的快速检测,如真空阴极放电对制备薄膜、离子注入材料的表征,导电材料的离子电荷态分布以及离子扩散速度的测定等。     

Quantum‐Chemical and Electrochemical Investigation of the Electrochemical Windows of Halogenated Carborate Anions

The range of electrochemical stability of a series of weakly coordinating halogenated (Hal=F, Cl, Br, I) 1‐carba‐closo‐dodecaborate anions, [1‐R‐CB₁₁X₅Y₆]^? (R=H, Me; X=H, Hal, Me; Y=Hal), has been established by using quantum chemical calculations and electrochemical methods. The structures of the neutral and dianionic radicals, as well as the anions, have been optimized by using DFT calculations at the PBE0/def2‐TZVPP level. The calculated structures are in good agreement with existing experimental data and with previous calculations. Their gas‐phase ionization energies and electron affinities were calculated based on their optimized structures and were compared with experimental (cyclic and square‐wave) voltammetry data. Electrochemical oxidation was performed in MeCN at room temperature and in liquid sulfur dioxide at lower temperatures. All of the anions show a very high resistance to the onset of oxidation (2.15–2.85 V versus Fc^0/+), with only a minor dependence of the oxidation potential on the different halogen substituents. In contrast, the reduction potentials in MeCN are strongly substituent dependent (?1.93 to ?3.32 V versus Fc^0/+). The calculated ionization energies and electron affinities correlate well with the experimental redox potentials, which provide important verification of the thermodynamic validity of the mostly irreversible redox processes that are observed for this series. The large electrochemical windows that are afforded by these anions indicate their suitability for electrochemical applications, for example, as supporting electrolytes.     

聚苯并双噁唑酰亚胺的热分解动力学研究

采用二步法合成了以2,6-二(对-氨基苯)苯[1,2-d;5,4-d’]二噁唑和1,4-二(3,4-二苯氧基)苯四甲酸二酐(HQDPA)为单体的聚苯并双噁唑酰亚胺.该聚酰亚胺的预聚体聚酰胺酸的黏度为1.70 dL/g,经过热环化后能够生成浅黄色的聚酰亚胺薄膜.通过热重分析法研究了聚苯并双噁唑酰亚胺在N2气氛中的热降解机理.采用Flynn-Wall-Ozawa和Friedman法计算了聚苯并双噁唑酰亚胺热降解表观活化能,分别为356.36kJ/mol和370.54 kJ/mol,平均值为363.45 kJ/mol;反应级数为4.22,指前因子为6.44×1016s-1.采用Coast-Redfern法和Phadnis-Deshpande法研究了聚苯并双噁唑酰亚胺的热降解固相反应机理,认为该聚酰亚胺的热降解机理属于反曲线(A3)机理,是成核和增长模式(Avrami equation 2方程)控制的热降解反应,积分形式为g(X)=[-ln(1-X)]3.     

Use of the Bell–Evans–Polanyi Principle to predict regioselectivity of nucleophilic aromatic photosubstitution reactions

Regioselectivity of nucleophilic aromatic photosubstitution has been shown experimentally to depend upon activation energies of the competing transition states. Computational means of determining relative activation energies were sought, therefore, in order to predict regioselectivity. Optimization of the three triplet transition states of 2-chloro-4-nitroanisole with hydroxide ion gave energies of insufficient accuracy to predict regioselectivity. Computed enthalpy changes from the first triplet transition state to the triplet σ-complexes correlated precisely with the experimental activation energies. This exemplifies the Bell–Evans–Polanyi Principle, and it provides an accurate means of assessing regioselectivity.