傅里叶变换轮廓术中相位失真的预矫正方法

介绍了一种基于傅里叶变换轮廓术的三维面形测量系统中相位失真的预矫正方法。由于投影系统和成像系统的空间三角位置关系、投影仪的发散照明和两套系统蕴含的光学畸变,投影一幅相位与空间坐标成理想线性关系的标准正弦光场,拍摄到的条纹相位和空间坐标不再呈线性分布,引起相位失真,甚至会影响系统测量精度。该方法借鉴反向条纹投影的思想,计算拍摄光场的非线性相位分布与理想的线性相位分布之间的关系,预先矫正,反算出一个新的待投影光场。实验结果表明这种方法能有效地减小该类相位失真所导致的测量误差,获得了更好的测量结果．     

激光器非线性失真对SCM光波系统的影响

对于宽带副载波复用(SCM)的光波系统,研究并设法减小光源的非线性所引起的谐波失真和交调失真,是一个重要的理论课题。本文分析激光器的P—I曲线的非线性以及谐振腔里光子和电子相互耦合所引起的固有非线性及其对复用信道的影响。     

光学系统时间畸变和色时间滞后的研究

本文对皮秒和飞秒技术中瞬态现象测量系统所用的特殊光学系统校正时间畸变和压缩色时间滞后的问题进行了讨论。实验证明用该方法设计研制的光学系统校正效果显着。     

Influence of binding energies of electrons on nuclear mass predictions

Nuclear mass contains a wealth of nuclear structure information, and has been widely employed to extract the nuclear effective interactions. The known nuclear mass is usually extracted from the experimental atomic mass by subtracting the masses of electrons and adding the binding energy of electrons in the atom. However,the binding energies of electrons are sometimes neglected in extracting the known nuclear masses. The influence of binding energies of electrons on nuclear mass predictions are carefully investigated in this work. If the binding energies of electrons are directly subtracted from the theoretical mass predictions, the rms deviations of nuclear mass predictions with respect to the known data are increased by about 200 ke V for nuclei with Z, N 8. Furthermore, by using the Coulomb energies between protons to absorb the binding energies of electrons, their influence on the rms deviations is significantly reduced to only about 10 ke V for nuclei with Z, N 8. However, the binding energies of electrons are still important for the heavy nuclei, about 150 ke V for nuclei around Z = 100 and up to about 500 ke V for nuclei around Z = 120. Therefore, it is necessary to consider the binding energies of electrons to reliably predict the masses of heavy nuclei at an accuracy of hundreds of ke V.     

摄像机标定技术在活塞视觉检测与分选中的应用研究

在机器人视觉检测及自动化分捡中,准确地校正摄像机镜头畸变对获取物体精确图像及确定物体准确位置具有重要意义。采用了带有径向畸变的小孔摄像机模型及基于线段斜率的标定方法。在标定过程中,应用线性算法求解出了镜头的径向畸变系数。实验表明,采用的标定方法简捷有效,其标定结果能够满足研究需要。     

Homography of central points for optical distortion compensation

The paper presents a novel radial lens distortion modelling method for vision systems. It is based on single images of chessboard planar pattern, in which calibration points (corners of chessboard squares) are localised. The points, which are situated near the image centre, where the distortion is negligible, are used to determine undistorted grid of calibration points by the estimation of homographic matrix. The differences in the localisation of undistorted and distorted points are used to find parameters of radial model by the linear least square method. Having the distortion model, the dense compensation is performed with support of bilinear interpolation and a sparse compensation by Newton iterative scheme providing subpixel accuracy.     

Intelligibility enhancement for noisy whispered speech using asymmetric cost function

We proposed two whispered speech enhancement methods based on asymmetric cost functions in this paper to deal with the amplification and attenuation distortions of whispered speech distinctively.The modified Itakura-Saito（MIS）distance function provides more penalties to speech amplification distortion,whereas the Kullback-Leibler（KL）divergence function gives more penalties to speech attenuation distortion.The experimental results show that the MIS function based method achieves significant improvement of intelligibility in contrast to the conventional speech enhancement algorithms when the signal-to-noise ratio（SNR）falls below-6 dB,whereas the KL function based one achieves the similar result as the minimum mean square error（MMSE）speech enhancement method.The results show that the effects of the amplification and attenuation distortions on the intelligibility of the enhanced whisper are different,where larger attenuation distortion may result in better intelligibility of speech with low SNR.However,the attenuation distortion has small effects on intelligibility of speech with high SNR.     

The effect of plasma channel on the self-distortion of laser pulse propagating through the collisional plasma channel

In the present paper, laser pulse distortion/breakup and the effect of the plasma channel on the laser propagation through the collisional plasma have been studied by using moment theory approach. Second order nonlinear differential equations of the beam width parameter have been derived for the propagation of the laser through uniform homogenous plasma and preformed plasma channel having parabolic density profile. Differential equations of beam width parameter have been solved numerically using Runge Kutta method. It has been observed from analysis that when the laser pulse propagates through the homogenous plasma, the low intensity front and rear parts of the laser get defocused/diffracted and the high intensity central/main portion of the laser pulse gets self-guided. As a result of this, the laser pulse gets distorted. This distortion of the laser has not been observed when the laser pulse is propagated through the plasma channel having density minimum at the axis and maximum at the edges. The laser pulse is guided as a whole, even the low intensity front and rear parts of the laser are also guided. Therefore, the plasma channel is useful to prevent the distortion/breakup of the laser.     

不同激光分布下Nd∶GdVO4晶体热焦距分析

为了研究方形激光晶体Nd∶GdVO4在超高斯泵浦光分布下的热效应,采用半解析的分析方法,进行了理论分析和实验验证.结果表明：当使用输出功率为15 W的半导体激光器端面中心入射时,在抽运端面中心获得1.38 μm最大热形变量（超高斯阶次为2时）和220 mm的热焦距（超高斯阶次为5时）.