Evaluation of the drag force by integrating the energy dissipation rate in stokes flow for 2D domains using the FEM

The total drag force on the surface of a body, which is the sum of the form drag and the skin friction drag in a 2D domain, is numerically evaluated by integrating the energy dissipation rate in the whole domain for an incompressible Stokes fluid. The finite element method is used to calculate both the energy dissipation rate in the whole domain as well as the drag on the boundary of the body. The evaluation of the drag and the energy dissipation rate are post-processing operations which are carried out after the velocity field and the pressure field for the flow over a particular profile have been obtained. The results obtained for the flow over three different but constant area profiles—a circle, an ellipse and a cross-section of a prolate spheroid—with uniform inlet velocity are presented and it is shown that the total drag force times the velocity is equal to the total energy dissipation rate in the entire finite flow domain. Hence, by calculating the energy dissipation rate in the domain with unit velocity specified at the far-field boundary enclosing the domain, the drag force on the boundary of the body can be obtained.     

Defect of the five-thirds law using the Wiener-Hermite expansion

Application of the refined Wiener-Hermite expansion with moderate to high Reynolds numbers Re to homogeneous, isotropic turbulence is presented. The results show a defect to Kolmogorov's five-thirds law, increase in the absolute value of the exponent comparable with many theoretical predictions. Midrange spectra up to fluctuation Reynolds numbers of 10⁸ show little, if any, dependence of the defect on Re, as long as the initial spectra do not deviate too far from their equilibrium states. The renormalization scheme has also been proven to have no effect on the final shape of the spectrum.     

从电子工业“脊梁”到全面开花的镓元素

镓是第一个根据化学元素周期律预言并在自然界中证实的元素，是室温下电导率和热导率均为最大的液态物质，镓在电子工业中得到了广泛应用，被誉为电子工业“脊梁”。近十几年来，镓的更多应用潜力被发掘出来，在电子工业、散热、增材制造、柔性机器、生物医学等领域均有重要的应用前景。     

Low dielectric thermoset. II. Synthesis and properties of novel 2,6‐dimethyl phenol–dipentene epoxy

A 2,6‐dimethyl phenol–dipentene adduct was synthesized from dipentene (DP) and 2,6‐dimethyl phenol, and then a 2,6‐dimethyl phenol–DP epoxy was synthesized from the reaction of the resultant 2,6‐dimethyl phenol–DP adduct and epichlorohydrin. The proposed structures were confirmed by Fourier transform infrared, elemental analysis, mass spectra, NMR spectra, and epoxy equivalent weight titration. The synthesized 2,6‐dimethyl phenol–DP adduct was cured with 4,4‐diamino diphenyl methane, phenol novolac, 4,4‐diamino diphenyl sulfone, and 4,4‐diamino diphenyl ether. The thermal properties of the cured epoxy resins were studied with differential scanning calorimetry, dynamic mechanical analysis, dielectric analysis, and thermogravimetric analysis. These data were compared with those for the bisphenol A epoxy system. The cured 2,6‐dimethyl phenol–DP epoxy exhibited a lower dielectric constant (ca. 3.1), a lower dissipation factor (ca. 0.065), a lower modulus, lower thermal stability (5% degradation temperature = 366–424 °C), and lower moisture absorption (1.21–2.18%) than the bisphenol A system but a higher glass‐transition temperature (ca. 173–222 °C) than that of bisphenol A system. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4084–4097, 2002     

强流射频四极加速器输入耦合环的物理设计研究

 详细讨论了强流射频四极加速器高频输入耦合环的一些基本问题，完成了高频输入耦合环的初步物理设计. 利用二维程序Superfish 的一些结果，确定了耦合环的大小，计算了耦合环的功耗，并对构成耦合环导线的粗细进行了估算。该耦合环的物理设计可作为耦合环试验的基础，同时，也可作为三维程序HFSS 模拟计算的起点。     

Dissipation,residue, and distribution of pyraclostrobin in banana and soil under field conditions in South China

Two independent field trials were conducted in Guangdong and Guangxi, South China, in 2013, to study the dissipation, residue levels, and distribution of pyraclostrobin in banana and soil under field conditions. Pyraclostrobin residues were determined through a quick and effective method of high-performance liquid chromatography. Results showed that the average recoveries ranged from 80.55% to 98.08%, with relative standard deviations of 3.18–7.81% at three different spiking levels for each different matrix. The quantification limit of the proposed method was 0.006 mg/kg for both banana and soil. The half-lives of pyraclostrobin in bananas were 9.09 days in Guangdong and 8.26 days in Guangxi, and both bananas exhibited a dissipation rate of 90% after 28 days. The half-lives of pyraclostrobin in soil were 11.61 days in Guangdong and 10.60 days in Guangxi, with a dissipation rate of 90% after 35 days. Although several positive banana samples (i.e., pyraclostrobin exceeding the maximum residue limits (MRL) were found, the terminal residues in banana pulp were not detectable. All the terminal residues in banana pulp were below the MRL of 0.02 mg/kg, set by the Chinese Ministry of Agriculture, indicating a negligible risk associated with the exposure to pyraclostrobin via the consumption of banana. The distribution of pyraclostrobin in soil was also investigated in two experimental sites. The pyraclostrobin in different layer soil was time dependent and did not vary between the two sites. The result also showed that pyraclostrobin could be easily transported from the top soil to the subsoil. However, the highest quantity ratio did not exceed 10% in the bottom layer (20–30 cm). The distribution assessment also revealed that no significant potential environment risk was induced by pyraclostrobin in bananas.     

Residual level of dimethachlon in rice‐paddy field system and cooked rice determined by gas chromatography with electron capture detector

In this study, a modified quick, easy, cheap, effective, rugged and safe method coupled with gas chromatography with electron capture detection was established to determine dimethachlon residues in paddy soil, rice husk, rice straw, brown rice and cooked rice. The limits of quantification of dimethachlon were 0.01 mg/kg for paddy soil, brown rice and cooked rice and 0.02 mg/kg for rice straw and rice husk. The mean recoveries were in the range 78.59–104.7% with relative standard deviation values of <10% for dimethachlon in the five matrices. For field experiments, the final residues of dimethachlon in paddy soil were < 0.05 mg/kg and were < 1.21 mg/kg in rice straw from six sites. The final residues of dimethachlon in the brown rice at 21, 28 and 35 days after spraying from six sites were 0.08–7.58 mg/kg, and 0.16–30.1 mg/kg in rice husk. Our six test sites covered the main rice–producing areas of China. The routine rice cooking process of a Chinese family could apparently increase the removal of dimethachlon in rice compared with brown rice, and the reduction ratios were > 96%.     

Liquid crystalline epoxy resin with improved thermal conductivity by intermolecular dipole–dipole interactions

To address tremendous needs for developing efficiently heat dissipating materials with lightweights, a series of liquid crystalline epoxy resins (LCEs) are designed and synthesized as thermally conductive matrix. All prepared LCEs possess epoxies at the molecular side positions and cyanobiphenyl mesogenic end groups. Based on several experimental results such as differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction, it is found that the LCEs exhibited liquid crystalline mesophases. When LCE is cured with a diamine crosslinker, the cured LCE maintains the oriented LC domain formed in the uncured state, ascribing to a presence of dipole–diploe and π–π interactions between cyanobiphenyl mesogenic end groups. Due to the anisotropic molecular orientation, the cured LCE exhibits a high thermal conductivity of 0.46 W m^?1 K^?1, which is higher than those of commercially available crystalline or amorphous epoxy resins. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 708–715     

Analytical and numerical solution for viscous dissipation effect on the heat transfer in a deformable channel

In this paper, shooting method and homotopy perturbation technique are applied for the flow analysis of temporal energy transport in a deformation channel with isothermal walls. An incompressible viscous fluid fills the space inside the channel. Analytical and numerical solutions are developed for the momentum and energy equations. The viscous dissipation effects are taken into account. Graphs for pertinent flow parameters are sketched and discussed. Comparison between the analytical and numerical solutions indicates an excellent agreement. It is noticed that behaviors of Prandtl and Eckert numbers on the temperature are qualitatively similar. Copyright © 2011 John Wiley & Sons, Ltd.     

Statistics of reaction progress variable and mixture fraction gradients of a pulverised coal jet flame using Direct Numerical Simulation data

The statistical behaviour of the variances, covariance and gradients of the reaction progress variable (c), and the mixture fraction (ξ) have been analysed in a pulverised coal jet flame using a three-dimensional carrier phase direct numerical simulation (DNS) dataset. It has been observed that the Favre-probability density functions (PDFs) of c and ξ can be parametrised by the standard β function. Furthermore, the log-normal distribution has been found to accurately represent |?c| and |?ξ|. It is also found that ?c and ?ξ remain aligned throughout the flame brush. Finally the joint PDF of |?c| and |?ξ| has been compared with the product of the PDF of |?c| and PDF of |?ξ| extracted from carrier phase DNS, and it has been found that |?c| and |?ξ| are not statistically independent in the case investigated.The bivariate log-normal distributions with and without correlation have also been considered, and the former is found to be in better agreement with the carrier phase DNS data.