Curvature and finite domination

Upper bounds obtained by Gromov on the Betti numbers of certain closed Riemannian manifolds are shown to be upper bounds on the minimum number of cells in --spaces dominating such manifolds.

     

CRYSTAL STRUCTURE AND MORPHOLOGY OF NASCENT SAMPLES OF SYMMETRIC AROMATIC POLYESTERS I.POLY(P-PHENYLENE TEREPHTHALATE)

The morphology and crystal structure of poly(p-phenylene terephthalate) (PPT), prepared by confined thin film melt (CTFMP) and solution (CTFSP) and bulk solution polymerization, were characterized by transmission electron microscopy, electron diffraction and molecular modeling. The unit cell is monoclinic (P21/a space group) with parameters a =7.89, b = 5.49, c =12.65 A α= γ= 90°,β= 100.33°, density = 1.48 g/cm3, the a, b andβ values differing slightly from those reported previously in the literature. A degree of variation in relative intensities of hk0 reflections in, apparently, untilted [001] ED patterns was observed from a given sample, suggesting some variation in molecular packing. ED evidence was found for a second phase, with [001] appearing the same as for phase Ⅱ of the related poly(p-oxybenzoate) (PpOBA)polymer. CTFMP crystals polymerized above 220°C (up to 370°C) and CTFSP crystals polymerized at 300°C consisted of lamellae 100-200 A thick.     

Preparation and properties of insoluble films of cyclodextrin condensation polymers

The preparation and properties of smooth and stable films of cyclodextrin polymers are described. The commercially available water soluble prepolymers of-, -, and-cyclodextrin of low molecular masses were crosslinked with glutaric dialdehyde. Side-chain unreacted aldehyde groups were reduced with sodium borohydride. For the-cyclodextrin polymer, optimum film performance was found for a 1:10 mass ratio of glutaric dialdehyde to prepolymer, which corresponds to a molar ratio of glutaric dialdehyde to cyclodextrin units of about 1.75: 1. Such films, of thickness 2.4 µm, were prepared on metallic or glassy-carbon substrates for characterization by scanning-electron microscopy, and for studies with the electrochemical quartz-crystal microbalance.     

DIRECT SOMATIC EMBRYOGENESIS AND PLANT REGENERATION FROM PROTOPLAST-DERIVED CELLS OF WHEAT (Triticum aestivum L.)

Protoplasts were isolated from embryogenic calli derived from immature embryos ofwheat (Triticum aestivum L. cv. Jinan 177). The protoplasts were cultured in NMB mediumsupplemented with 1mg/L 2,4- D and 500mg/l casein hydrolysate (CH). The regenerated cellsfrom protoplasts divided to form somatic embryos directly. The somatic embryos grown to1.5- 2 mm in size directly developed into complete plants on solid MB medium without hor-mones.     

缩聚合成聚芳酯和聚酯－聚醚弹性体的微相复合物

通过原位直接缩聚反应，制备了刚性棒状聚对羟基苯甲酸酯（ＰＨＢ）和聚对苯二甲酸丁二醇酯－聚四亚甲基醚多嵌段共聚物（ＰＢＴ－ＰＴＭＧ）的微相复合物．复合物可溶于氯仿等溶剂，可以浇铸成膜．本文研究了ＰＨＢ含量和聚合过程中，基体聚合物溶液浓度对微相复合物形态以及力学性能影响．同共混法相比，原位缩聚法可得到分散更均匀，力学性能更优良的微相复合物．     

A facile synthesis of aliphatic polybenzoxazoles from a bis(o-aminophenol) or its hydrochloride and aliphatic dinitriles

A facile one-step method for the synthesis of aliphatic polybenzoxazoles has been developed. Thus, a series of aliphatic polybenzoxazoles having inherent viscosities of 0.2–0.7 dL/g in concentrated sulfuric acid were successfully synthesized by the melt polycondensation of alipatic dinitriles with 4,4′-diamino-3,3′-dihydroxybiphenyl (AHB) or its hydrochloride (AHB–HCl) with the elimination of ammonia or ammonium chloride, respectively. Monomer AHB–HCl was more reactive than the parent AHB, thereby affording higher molecular weight polybenzoxazoles in a shorter reaction time. The aliphatic polybenzoxazoles having 6–10 methylene units were highly crystalline with melting temperatures in the range of 187–308°C, which were stable up to 400°C in a melt state in nitrogen. © 1994 John Wiley & Sons, Inc.     

cotpp-pt/c作直接甲醇燃料电池阴极催化剂

四苯基钴卟啉;pt催化剂;直接甲醇燃料电池;氧还原     

Purification by solid layer melt crystallization

The application of solid layer crystallization techniques in industry is arousing ever more interest. One reason is the increasing demand for ultrapure products, and another is the energysaving potential of this separation technology.This article examines solid layer melt crystallization as concerns its purification efficiency. The crystallization process was carried out in two different modes, whereby the process parameters were varied and post-crystallization treatments were additionally applied. The experimental results were used as the basis for a mathematical fit of a semi-empirical expression which predicts the purification efficiency. It was used for a design of different multistage plants, which operate with different crystallization strategies. One result is that a comparable product quality is attainable with a simple process technique in combination with post-crystallization treatments, instead of a more complicated and therefore more expensive process technique.The authors wish to acknowledge support by the EU (JOULE program), which helped attainment of some results presented here.     

Formation of Iron Macro-Spheres in Plasma

In this paper the formation mechanism of iron macro-spheres in a plasma medium is dealt with, including the conditions under which such spheres are formed. The geometry of the spheres referred to above depends on the main technological parameters involved in the production of pores. Conditions under which pores occur within macro-spheres are also established. The radii of these pores are sensitive to the velocity distribution within the plasma jet section     

Direct Electrochemistry of Cytochrome c on EDTA-ZrO2 Organic-inorganic Hybrid Film Modified ElectrodesState Key Laborator3.＂ of Chemo／Biosensing and Chemometrics, Hunan Universit3; Changsha. Hunan 410082. China

A composite film of ethylenediamine tetraacetic acid (EDTA)‐ZrO₂ organic‐inorganic hybrid was prepared based on the chelation between Zr(IV) and EDTA. The direct electrochemical behavior of cytochrome c (cyt. c) at the hybrid film modified glassy carbon electrodes was investigated. The immobilized EDTA can promote the redox of heme in horse heart cyt. c which gives rise to a pair of reversible redox peaks with a formal potential of 40 mV (vs. SCE). The peak current increased linearly with the increase of cyt. c concentration in the range of 1.6 × 10^?6—8.0 × 10^?5 mol·L^?1 with the correlation coefficient of 0.996. Further investigation shows that metal ions can impede the electron transfer of cyt. c. The impediment capability of metal ions depends on their coordination capability with EDTA and their valence number.