Direct Visualization of Electromagnetic Microfields by Superposition of Two Kinds of Electron Holograms

A new electron holographic method is presented to directly visualize pure phase objects such as electromagnetic microfields, which is achieved by superposition of two kinds of electron holograms. The method is very simple and is twice as sensitive as the conventional double-exposure electron holography and the four-electron-wave interference. Using this technique, an electric field around a charged latex sphere and a magnetic field around a barium ferrite particle have been directly observed.     

Studies on the thermotropic liquid-crystalline polymer. VIII. Synthesis and properties of fully aromatic poly(ester)s and poly(amide-ester)s containing p-phenylene diacrylic group

Three series of polymers containing p-phenylene diacrylic group were prepared by direct polycondensation in the presence of diphenylchlorophosphate and pyridine. Series I was prepared from p-phenylene bis(acrylic acid) with various hydroquinones. Series II was prepared from p-phenylene bis (β-cyano acrylic acid) with methylhydroquinone. Series III was prepared from 3-methyl-4-aminophenol with p-phenylene bis(acrylic acid) or p-phenylene bis(β-cyano acrylic acid), respectively. The phase behavior of these polymers was studied by differential scanning calorimetry (DSC), optical polarizing microscopy equipped with a heating stage, and wide-angle x-ray diffraction (WAXD). It was found that these polymers, except IIIb , exhibit thermotropic liquid-crystalline properties and show threaded or Schlieren texture under the optical polarizing microscopic observation. Furthermore, the melting temperatures of these polymers were decreased in the range of 254–354°C by incorporating with p-phenylene diacrylic group into the main chain. © 1993 John Wiley & Sons, Inc.     

New polymer syntheses. LXXXII. Syntheses of poly(ether-sulfone)s from silylated aliphatic diols including chiral monomers

Attempts were made to synthesize poly(ether-sulfone)s from aliphatic diols or bissilylated diols on the one hand, and 4,4′-dichlorodiphenylsulfone or 4,4′-difluorodiphenylsulfone on the other hand. The reaction conditions and the catalyst were varied. Polycondensations of silylated diols with 4,4′-difluorodiphenylsulfone and powdered K₂ CO₃ in N-methylpyr-rolidone proved to give the best results. Using silylated isosorbide and isomannide as mono-mers chiral poly(ether-sulfone)s were prepared. GPC measurements indicate weight-average molecular weights in the range of 27×10³–200×10³. © 1995 John Wiley & Sons, Inc.     

Effects of Cathode and Anode on Deposition of Trimethylsilane in Glow Discharge

DC cathodic polymerization of trimethylsilane (TMS) was carried out in plasma reactors with and without using anode assembly. In DC cathodic polymerization, the TMS plasma polymers are mainly deposited on the cathode (substrate) surface. As a result, fast deposition of TMS plasma polymers was easily achieved in DC cathodic polymerization as compared with AF or RF plasma polymerization. DC cathodic polymerization without using anode assembly has its advantageous features that the size and number of substrates (as cathodes) are not restricted by the size and the location of anode assembly. It was found that the maximum deposition rate on the cathode surfaces was obtained without anode assembly. The DC cathodic polymerization of TMS was conducted also in a large volume reactor with multiple cathodes (substrates). The same deposition mechanisms for DC cathodic polymerization with a single cathode also apply to the multiple cathodes. Uniform deposition on each cathode could be obtained with appropriate spacing of multiple cathodes and by adjusting the operational parameters, which are based on the current density and the system pressure.     

Pd-SiW12/SiO2催化剂上乙烯直接氧化制乙酸的反应机理

 利用积分反应器和微分反应器对Pd－SiW12／SiO2催化剂上乙烯直接氧化生成乙酸的反应机理进行了探讨．乙烯在积分反应中氧化的主要产物为乙酸（选择性为77．6％），很少生成乙醛（选择性仅为8．1％）；而在微分反应中氧化的主要产物是乙醛（选择性为98．4％）．在微分反应中分别以乙醛和乙醇为主反应物时，乙醛氧化完全生成乙酸，选择性为100％，而乙醇氧化生成乙酸的选择性低于0．15％．可以认为，在Pd－SiW12／SiO2催化剂上，水蒸气存在下乙烯主要经由中间物乙醛而生成乙酸．通过对含有不同组分和不同还原条件处理的催化剂活性的比较，认为目的反应主要发生在Pd与SiW12相互接触的部位，催化剂中的Pd0是活性Pd物种的主要形态．     

Synthesis and characterization of sulfone-containing polyesters derived from 4,4′-dicarboxydiphenyl sulfone by direct polycondensation

Several sulfone-containing polyesters having inherent viscosities 0.43-0.19 dL g^?1 were prepared by direct polycondensation of 4,4′-dicarboxydiphenyl sulfone (DCDPS) with various aromatic and aliphatic diols, by p-toluenesulfonyl chloride and N,N′-dimethylformamide in pyridine solution. The polyesters were examined by elementary analysis, IR spectra, inherent viscosity, x-ray diffraction, solubility, DSC, and TGA. The diffraction diagram showed that all polyesters were crystalline except that obtained from bisphenol-A. All polymers were soluble in sulfonic acid (18M), phenol and p-chlorophenol, but not in acetone and toluene. These polymers obtained from aromatic bisphenols lost no mass below 325°C, but 10% loss of mass was recorded above 396°C in nitrogen. DCDPS copolymerized with isophthalic acid (IPA) and bisphenol-A had inherent viscosity up to 0.49 dL g^?1, with relatively narrow distribution of molar mass . © 1995 John Wiley & Sons, Inc.     

Theoretical study and rate constant calculation for the reactions of SH (SD) with Cl2, Br2, and BrCl

The mechanisms of the SH (SD) radicals with Cl2 (R1), Br2 (R2), and BrCl (R3) are investigated theoretically, and the rate constants are calculated using a dual-level direct dynamics method. The optimized geometries and frequencies of the stationary points are calculated at the MP2/6-311G(d,p) and MPW1K/6-311G(d,p) levels. Higher-level energies are obtained at the approximate QCISD(T)/6-311++G(3df, 2pd) level using the MP2 geometries as well as by the multicoefficient correlation method based on QCISD (MC-QCISD) using the MPW1K geometries. Complexes with energies less than those of the reactants or products are located at the entrance or the exit channels of these reactions, which indicate that the reactions may proceed via an indirect mechanism. The enthalpies of formation for the species XSH/XSD (X = Cl and Br) are evaluated using hydrogenation working reactions method. By canonical variational transition-state theory (CVT), the rate constants of SH and SD radicals with Cl2, Br2, and BrCl are calculated over a wide temperature range of 200-2000 K at the a-QCISD(T)/6-311++G(3df, 2pd)//MP2/6-311G(d, p) level. Good agreement between the calculated and experimental rate constants is obtained in the measured temperature range. Our calculations show that for SH (SD) + BrCl reaction bromine abstraction (R3a or R3a') leading to the formation of BrSH (BrSD) + Cl in a barrierless process dominants the reaction with the branching ratios for channels 3a and 3a' of 99% at 298 K, which is quite different from the experimental result of k3a'/k3' = 54 +/- 10%. Negative activation energies are found at the higher level for the SH + Br2 and SH + BrCl (Br-abstraction) reactions; as a result, the rate constants show a slightly negative temperature dependence, which is consistent with the determination in the literature. The kinetic isotope effects for the three reactions are "inverse". The values of kH/kD are 0.88, 0.91, and 0.69 at room temperature, respectively, and they increase as the temperature increases.     

Synthesis and Characterization of Poly（butylene adipate-co-terephthalate） Catalyzed by Rare Earth Stearates

Rare earth （Nd, Y, La, Dy） stearates have been synthesized and used as single component catalysts for the polycondensation of dimethyl terephthalate, adipic acid and 1,4-butanediol for the first time preparing biodegradable poly（butylene adipate-co-terephthalate） （PBAT） with high molecular weight, The microstructures of PBAT were characterized by ^1H NMR spectra. The PBAT exhibits good mechanical properties such as high tensile strength （ca. 20 MPa） and long break elongation （〉700%）.     

New Phase in the Bi–Sr–Ca–Cu–O System

Cooling a melt of a Bi–Sr–Ca–Cu–O system (Bi:Sr:Ca:Cu = 4:3:3:4 or 2:2:2:4) from 1000°C-1050°C yielded crystals of a new red-colored nonsuperconducting phase, accompanying the superconducting 2212 and 2201 phases. Based on the EPR spectra, it was concluded that copper is univalent in this compound. The new phase has a composition Bi_2.2Sr_1.6Ca_1.3Cu₂Ox. The X-ray diffraction pattern has been indexed, and the unit cell parameters of the phase have been determined: space group P2/m, a = 12.93, b = 4.55, c = 10.94 ; = 102.72°.     

Production of high melt strength polypropylene by gamma irradiation

High melt strength polypropylene (HMS-PP) has been recently developed and introduced in the market by the major international producers of polypropylene. Therefore, BRASKEM, the leading Brazilian PP producer, together with EMBRARAD, the leading Brazilian gamma irradiator, and the IPEN (Institute of Nuclear Energy and Research) worked to develop a national technology for the production of HMS-PP. One of the effective approaches to improve melt strength and extensibility is to add chain branches onto polypropylene backbone using gamma radiation. Branching and grafting result from the radical combinations during irradiation process. Crosslinking and main chain scission in the polymer structure are also obtained during this process. In this work, gamma irradiation technique was used to induce chemical changes in commercial polypropylene with two different monomers, Tri-allyl-isocyanurate (TAIC) and Tri-methylolpropane-trimethacrylate (TMPTMA), with concentration ranging from 1.5 to 5.0 mmol/100 g of polypropylene. These samples were irradiated with a ⁶⁰Co source at dose of 20 kGy. It used two different methods of HMS-PP processing. The crosslinking of modified polymers was studied by measuring gel content melt flow rate and rheological properties like melt strength and drawability. It was observed that the reaction method and the monomer type have influenced the properties. However, the concentration variation of monomer has no effect.