Photovoltaic Characteristics of a Naphthylamine Derivative

Organic photovoltaic （OPV） cells were fabricated via vacuum vapor deposition with {4-[2-（3-di-cyanomethylidene-5,5-dimethylcyclohexenyl）vinyl]phenyl}di（1-naphthyl）amine （DNP-2CN） as the electron donor, and fullerene （C60） as the electron acceptor. A thin film （10 nm） of tris（8-quinolinolato）aluminum （Alq3） was adopted as the buffer layer. A device based on this DNP-2CN exhibited an open circuit voltage （Voc） of 370 mV, a short-circuit current density （Jsc） of 0.61 mAocm 2, and a white-light power conversion efficiency （ η） of 0.09% （AM1.5, 75 mW.cm^- 2）.     

Capillary electrochromatographic separation of enantiomers under aqueous mobile phases on a covalently bonded cellulose derivative chiral stationary phase

A chemically bonded cellulose tris(3,5-dimethylphenylcarbamate) chiral stationary phase (CSP) was prepared by a radical polymerization reaction. The prepared CSP was packed into fused-silica capillaries with inner diameter of 75 microm to perform enantiomer separations in CEC. The electrochromatographic behavior of the CSP was investigated. On the prepared CSP, high EOF could be generated under acidic mobile phases, which represented an advantage for the separation of acidic enantiomers. Several neutral, acidic, and basic enantiomers were resolved on the prepared CSP under aqueous mobile phases. The column efficiencies were between 20,000 and 100,000 plates/m, which were much higher than those of HPLC. In addition, it was observed that the separation of some enantiomers benefited from the adoption of THF as mobile phase modifier.     

Investigation into new materials for optical devices: the miscibility and solvent effects of azobenzene derivative blends

With the increasing demand for novel devices with optical applications the search for new materials to data store and process becomes a priority. By introducing blends, tailor made properties and low cost give added advantage. Miscibility is an essential requirement for a new material, this research thus involves miscibility studies of poly(4‐(N‐(2‐methacryloyloxyethyl)‐N‐ethylamino)‐4′‐nitroazobenzene)₉₀‐co‐(methyl methacrylate)₁₀, (azobenzene derivative) with polymethyl‐methacrylate (PMMA), polyvinylacetate (PVAc) and polyvinylchloride (PVC) prepared in tetrahydrofuran (THF), and/or dimethylformamide (DMF) and/or dichloromethane (CH₂Cl₂). The glass transitions, solvent and varying molecular weight effect were investigated, since these all primarily influence the miscibility. THF was found to encourage miscibility at specific compositions of PVAc and PVC blends. However, with CH₂Cl₂ and DMF immiscibility is encouraged. The Fox–Flory equation was applied to the blends analyzing the PVC blends in DMF as deviations from ideality. Different molecular weights of PMMA were identified as immiscible regardless of solvent. PMMA's lower solubility in THF and CH₂Cl₂ compared to the azobenzene derivative, displayed the existence of PMMA islands. In all blends the favorable and unfavorable interactions between polymer–solvent–polymer systems are considered. Furthermore, the miscibility effect on increasing the MMA content of the azobenzene derivative was also investigated. Copyright © 2002 John Wiley & Sons, Ltd.     

Analysis of First-Order Reactions with Distributed Parameters

Simple methods of analysis of first-order kinetic processes controlled by distributions of parameters (activation energies and/or frequency factors) are presented. Both the isothermal and nonisothermal regimes are considered. The procedures make use of numerically calculated time derivatives of the concentrations of decaying species (reactants in the case of chemical reactions). They do not require any adjustable initial or boundary values of parameters (like concentration at the infinite time) being thus more accurate and reliable than earlier methods in which kinetic parameters were determined from the concentration, and not from its time derivative. The methods were successfully employed in analysis of the thermally driven cis–trans isomerization of a photochromic crown ether containing the azobenzene moiety incorporated in the crown.     

2,3-二取代-4-(IH-l,2,4-三唑-l-基)-5-苯基氢基噻吩的合成及生物活性研究

合成了九个以噻吩为母体环的含三唑环的化合物——2，3-二取代-4-(1H-1， 2，4．三唑-1-基)-5-苯基氨基噻吩(2a-2i)，并测定了2a的晶体结构．晶体为三斜 晶系，P-1空间群，晶胞参数为：a=0．79816(15)nm，b=1．00259(13)nm，c=1． 4478(4)nm，a=100．326(16)°，β=94．69(2)°，r=106．083(9)°，V=1．0845 (4)nm～3，z=2，D_c=1．396 g／cm～3．初步生物活性表明所有目标化合物杀菌活 性较低，有一定的植物生长调节活性．     

无亲水基团取代的四苯基卟吩类LB膜的制备与表征

拉制了4种无亲水基团的四苯基卟吩LB膜,用透射电镜、荧光寿命、荧光光谱和紫外-可见光谱测量表征了膜的形貌和结构,发现膜中卟吩主要以聚集体形式存在。     

On solvability of differential equations with the Riesz fractional derivative

We consider the solvability of fractional differential equations involving the Riesz fractional derivative. Our approach basically relies on the reduction of the problem considered to the equivalent nonlinear mixed Volterra and Cauchy-type singular integral equation and on the theory of fractional calculus. By establishing a compactness property of the Riemann–Liouville fractional integral operator on Lebesgue spaces and using the well-known Krasnoselskii's fixed point theorem, an existence of at least one solution is gleaned. An example is finally included to show the applicability of the theory.     

Products and transforms of white-noise functionals (in general setting)

Some sharp results about Weiner and Wick products of whitenoise functionals are obtained. Using the inequality of Wick products we show to what extent scaling transformations, translations, and Sobolev differentiations can be performed on white-noise functionals.This work was supported by the National Natural Science Foundation of China. This paper is an enlargement and revised version of the paper entitled Products and Transforms of White-Noise Functionals (preprint, 1990).     

Spectrophotometric determination of zinc in copper-base alloys with TAN

TAN reacts with zinc(II) forming a red complex with composition 1:2 Zn(II)-TAN and absorption maximum at 582 nm. Zinc can be determined with this reagent in the presence of Triton X-100, in the pH range 6.20-8.00 with a molar absorptivity of 4.5×10⁴ l/mol/cm Beer's Law was obeyed up to least 1.55 g/ml. Copper interference was eliminated with a mixture of thiosulfate and ascorbic acid and nickel separated by precipitation with dimethylglyoxime. The proposed method was used for zinc determination in several copper-base alloys and the results of analysis in comparison with certified values indicated that the procedure was accurate and precise. A derivative procedure is also proposed, allowing zinc determination with high sensitivity (5-400 ng/ml).