Manipulation of the Electroosmotic Flow in Glass und PMMA Microchips with Respect to Specific Enzymatic Glucose Determinations

The determination of glucose in microfluidic chips made of glass or PMMA was used as a model for the combination of an enzymatic reaction with the separation of compounds. It was based on the enzymatic oxidation of glucose and the amperometric detection of hydrogen peroxide. Real samples frequently contain compounds, such as ascorbic acid, which may interfere with quantitative glucose determinations. Thus, electrophoretic separation of specific from unspecific signals was envisaged by applying electric fields which are also used to control the flow of liquid via electroosmotic effects. Surface charge densities of the capillaries influence the electroosmotic flow (EOF). They are dependent on the chip material and on the adsorption of components from the background electrolyte. Reversal of the EOF after addition of cetyltrimethylammonium bromide (CTAB) and an increase in EOF after addition of sodium dodecylsulfate (SDS) were observed at lower surfactant concentrations with the PMMA chips rather than with the glass chips. For both chip materials these concentrations were below the critical micelle concentration. Effective separation of H₂O₂ and ascorbic acid was achieved with low CTAB concentrations, which lead to a reduction, but not to a reversal of the EOF. Reversal of the EOF by higher CTAB concentrations or the increase in cathodic EOF by SDS accelerated ascorbic acid transportation and reduced the differences in migration times. Thus, for the specific determination of glucose, glucose oxidase was added together with low CTAB concentrations to the background electrolyte. This avoided interference from ascorbic acid, and data obtained from the analysis of fruit juices showed a good correlation to data obtained from a reference method.     

Sol-gel approach to in situ creation of high pH-resistant surface-bonded organic-inorganic hybrid zirconia coating for capillary microextraction (in-tube SPME)

A novel zirconia-based hybrid organic-inorganic sol-gel coating was developed for capillary microextraction (CME) (in-tube SPME). High degree of chemical inertness inherent in zirconia makes it very difficult to covalently bind a suitable organic ligand to its surface. In the present work, this problem was addressed from a sol-gel chemistry point of view. Principles of sol-gel chemistry were employed to chemically bind a hydroxy-terminated silicone polymer (polydimethyldiphenylsiloxane, PDMDPS) to a sol-gel zirconia network in the course of its evolution from a highly reactive alkoxide precursor undergoing controlled hydrolytic polycondensation reactions. A fused silica capillary was filled with a properly designed sol solution to allow for the sol-gel reactions to take place within the capillary for a predetermined period of time (typically 15-30 min). In the course of this process, a layer of the evolving hybrid organic-inorganic sol-gel polymer got chemically anchored to the silanol groups on the capillary inner walls via condensation reaction. At the end of this in-capillary residence time, the unbonded part of the sol solution was expelled from the capillary under helium pressure, leaving behind a chemically bonded sol-gel zirconia-PDMDPS coating on the inner walls. Polycyclic aromatic hydrocarbons, ketones, and aldehydes were efficiently extracted and preconcentrated from dilute aqueous samples using sol-gel zirconia-PDMDPS coated capillaries followed by thermal desorption and GC analysis of the extracted solutes. The newly developed sol-gel hybrid zirconia coatings demonstrated excellent pH stability, and retained the extraction characteristics intact even after continuous rinsing with a 0.1 M NaOH solution for 24 h. To our knowledge, this is the first report on the use of a sol-gel zirconia-based hybrid organic-inorganic coating as an extraction medium in solid phase microextraction (SPME).     

Optoacoustic Laser Stark spectroscopy and FIR laser action on CH3Br using a waveguide CO2 laser

The optoacoustic spectrum of CH₃Br around 10 m band lines of a tunable cw waveguide CO₂ laser is investigated. Several new infrared absorptions are observed and most of the correspond ing molecular transitions are assigned. Far infra red laser action is reported by pumping with the same CO₂ laser: pump offsets are given using the Transferred Lambs dip (TLD) technique. A new FIR laser emission is obtained and assigned. An optoacoustic Laser Stark spectroscopy technique is used to investigate off resonance infrared tran sitions.     

Free release static coating of glass capillary columns; Static coating at elevated pressure — Theoretical considerations and practice

Summary Static coating of glass capillary columns has hitherto solely been carried out by evaporation of the stationary phase solvents under vacuum conditions. However, since a solvent vapour pressure higher than the external pressure is the only requirement for the vapour to flow out of the column, evacuation should not be necessary. Several important factors in the static coating procedure, such as mass (solvent vapour) — and heat transfer, heat of vaporisation of the solvent and viscosity of the stationary phase solution at elevated temperature and outlet pressure are discussed, principally to rationalise an improved static coating procedure. The alternative, so-called free-release static coating procedure, was evaluated practically by coating several columns with OV-101 and SE-30. Coating speed was found to be rapid and relatively constant whereas coating efficiency was between 80 and 100%.     

Effect of solvent composition on free release static coating of capillary columns

Summary Three aspects with respect to the selection of solvents for static coating of capillary columns, i.e. coating speed, occurrence of bumping and solubility of stationary phases are discussed. Hypotheses are proposed in an attempt to explain the observed facts that mixed solvents result in much higher coating speeds than those obtained from pure solvents, that a proper choice of solvents together with a good and uniform deactivitation of the column inner wall is needed to prevent bumping. Stationary phase solubility vs. solvent composition is also briefly discussed.     

Separation of oligonucleotides and DNA fragments by capillary electrophoresis in dynamically and permanently coated capillaries,using a copolymer of acrylamide and β-D-glucopyranoside as a new low viscosity matrix with high sieving capacity

New copolymers of acrylamide and β-D -glucopyranoside were synthesized and characterized. The different reactivity of the two monomers towards radical polymerization meant we could control the growth of the polymer chains whose length was inversely related to the number of glucose residues incorporated in the copolymers. The properties of these polymers were investigated in the separation of oligonucleotides and double-stranded DNA by capillary electrophoresis (CE) in coated and uncoated capillaries. The new copolymers were a suitable matrix for CE due to their high-resolving capacity and low viscosity. We also looked into the advantages of a new method of dynamic suppression of electroosmotic flow based on the addition of small amounts (0.03–0.05%) of dimethylacrylamide to the sieving and to the running buffer. A complete test was run on the reproducibility and efficiency of separations carried out in a permanently and dynamically coated capillary, and the advantages and disadvantages of the two methods were compared.     

Stroboscopic microscopy—direct imaging of structure development and phase separation during spin‐coating

Spin‐coated polymer blends possess a rich variety of accessible non‐equilibrium morphologies, formed through a process of phase separation and self‐assembly, the complexities of which remain incompletely understood. The technique of stroboscopic microscopy has now been developed to allow direct observations of microscopic and mesoscopic morphological development during spin‐coating and has afforded unequivocal information regarding morphological development. The technique so far has three modes of operation providing information on topographical, compositional, and crystal development. In this review, we look at the technique's development, its applications and comment on the future potential for this technique. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 17–25     

Thermal degradation and fire performance of intumescent silicone‐based coatings

This paper deals with the thermal degradation and fire performance of silicone‐based coatings for protecting steel. In this study, the fire performance of silicone coatings as virgin or formulated materials is evaluated using two homemade fire testing methodologies: one similar to the “torch test” fire testing method and the other using a heat radiator test. It was shown that the performance of the silicone‐based coating used as thermal barrier can be improved incorporating a modifier (a mixture of polydimethylsiloxane and silica coated by a silane). In this case, silicone‐based coating swells and exhibits same fire performance as commercial intumescent coating at the torch test. It is shown that the incorporation of modifier in the silicone makes it to swell upon heating resulting in the formation of expanded material exhibiting low heat conductivity. Thermal degradation of the coating is also investigated: it occurs in three main steps leading to the formation of a tridimensional network characterized by the formation of Q⁴ structure at high temperature. Copyright © 2012 John Wiley & Sons, Ltd.     

Design and fabrication of multi-layers infrared antireflection coating consisting of ZnS and Ge on ZnS substrate

We have designed, fabricated and characterized a multi-layers antireflection coating on multispectral ZnS substrate, suitable for the infrared range of 8–12 μm. The 4-layers coating (Ge/ZnS/Ge/ZnS) with optimized thicknesses was fabricated by PVD technique and studied by FTIR, nanoindentation and AFM. From FTIR spectroscopy it was found that, in the wavelength range of 8–12 μm, the average transmittance of the double-side coated sample increases by about 26% and its maximum reaches about 98%. To improve the mechanical hardness, a bilayer of Y₂O₃/carbon was deposited on the coating. Nanoindentation test shows that the coating enhances the mechanical properties. The final coating have successfully passed durability and environmental tests.