Continuous chromatographic separation of glucose-fructose mixtures using anion-exchange resins

Summary A semi-continuous, counter-current chromatographic refiner (SCCR) was packed with an anion resin in the bisulphite form and used to separate mixtures of sugars from different feedstocks. Products with purities of more than 99% were achieved and solid concentrations of the fructose products of 12% w/v were possible. The deterioration of the anion resin was controlled by simple precautions and thus its useful life was substantially prolonged.     

Multicomponent electrolyte systems: Dependence of ionic mobilities on aqueous organic solvent structure

Ionic mobility data for multicomponent electrolyte systems at low concentrations are scarce due to experimental difficulties and are actually restricted to aqueous solutions of alkali chlorides. Some new results are presented which have been obtained by using a radiotracer method valid even if one of the ionic species is present at very low concentrations (tracer ion). The following electrolyte systems (two electrolytes with a common ion in a solvent) have been investigated at a 0.5N total ionic strength: NaNO₃–AgNO₃, KNO₃–AgNO₃, LiNO₃–AgNO₃ either in pure water or in water-rich (acetonitrile or dimethylsulfoxide) mixed solvents. Since ionic conductivity data processing by an extended law generalized to mixtures, such as that proposed by Quint and Viallard, has proved to be delicate to handle, our experimental results have been compared with the qualitative predictions of the classical Onsager-Fuoss limiting law. The main conclusion of this work is to give clear experimental evidence of the inability of any continuum theory to predict the ionic mobilities when solvent structural effect have to be taken into account. Consequently, the ionic behavior, particularly that of the Ag⁺ ion, has been interpreted in terms of preferential solvation and solvent microscopic structure. The trace mobility measurements reflect the maximum structural effect on the ionic transport properties.     

Radiation grafting from binary monomer mixtures. I. Vinyl ether of monoethanolamine and vinyl ether of ethyleneglycol

Gamma-radiation grafting of vinyl ether of monoethanolamine and vinyl ether of ethyleneglycol (VEEG) on polyethylene films has been studied from binary monomer mixtures. The effect of co-monomer composition and total exposure radiation dose on the grafting process is investigated. A combination of potentiometric and gravimetric techniques is applied to determine the grafting degree of each monomer in the final graft copolymer. The presence of more active monomer VEEG in the mixture was found to enhance the grafting of both monomers because the increasing of copolymerization rate which in turn increases the total grafting degree. The modification of the hydrophilic properties of the graft copolymer is studied by examining the grafted films for water- and copper (II) ions uptake.     

A way of establishing quality of measurements in gas analysis—national and international aspects

Standardising quality of measurements at both the national and international level results in a unity in measurement that may be regarded a synonym of traceability. In gas analysis, the key issue in achieving this aim is production of gaseous reference materials. Establishing a network of secondary measurement standards at gaseous CRM producers’ sites in Ukraine might be interesting for those involved in gas analysis activities. Inevitably, problems concerning the recognition of measuring capabilities of both national metrological institutes and local CRM producers are now an international issue. Thus, the problems of national adoption of international standards, as well as harmonisation between different international documents are currently relevant, and Ukrainian experience may be useful to others in this field. Presented at the 3rd International Conference on Metrology, November 2006, Tel Aviv, Israel.     

Thermodynamic and spectroscopic properties of 2-pyrrolidinones. 2. Dielectric properties of 2-pyrrolidinone in binary mixtures

Dielectric permittivities of 2-pyrrolidinone - acetone, -dimethyl sulfoxide,-2-propanol, -dichloromethane and -water systems were measured as a function of mole fraction over the whole composition range at 30 and 50°C. The excess dielectric permittivities are predominantly negative for all the mixtures and the excess molar polarizations are negative except for 2-pyrrolidinone - water and 2-pyrrolidinone - dimethyl sulfoxide mixtures. The large negative excess quantities are indicative of the strong specific interactions between the like and unlike components of the solution mixtures.     

Molecular interactions in 1-pentanol +2-methyl-2-butanol mixtures: Static dielectric constant,viscosity and refractive index investigations at 5, 25 and 45°C

Static dielectric constants, refractive indices and viscosities of 1-pentanol +2-methyl-2-butanol mixtures were measured at 5, 25 and 45°C. The results show that the mixing of the two isomers modifies the polarizability and the resistence of viscous flow of the system depending on the composition and temperature. Short range intermolecular interactions producing hetero-alcohol open dimers are considered.     

Liquids and liquid mixtures: Deduction of the BGY equation considering the angular distribution function

The Born→Green→Yvon equation for molecular fluid has been deduced considering the orientational distribution functions. The isotropic and anisotropic parts of the distribution function have been separated. The expressions deduced can be used in the case of mixtures and for the non-central type of intermolecular potential energy.     

Making the liquid-phase catalytic hydrodechlorination of pce over Pd/C safer

Summary The hydrodechlorination of tetrachloroethylene in methanol (MeOH) over palladium catalysts on activated carbon (Pd/C) at 20°C and atmospheric pressure was rendered safer by using ethanol (EtOH), isopropanol (IPA) or water-alcohol mixtures as solvents. Adding water to MeOH was better than using EtOH or IPA since it resulted in a faster reaction and better stability of Pd/C, which could also be completely reactivated.     

Solubility of benzil in binary alkane + dibutyl ether solvent mixtures. Comparison of predictive expressions derived from the nearly ideal binary solvent model

Experimental solubilities are reported for benzil dissolved in six binary mixtures containing dibutyl ether with hexane, heptane, octane, cyclohexane, methylcyclohexane, and 2,2,4-trimethylpentane at 25°C. Results of these measurements are compared to the predictions of equations developed previously for solubility in systems of nonspecific interactions. The most successful equation in terms of goodness of fit involved a volume fraction average of the excess Gibbs energies relative to the Flory-Huggins model, and predicted the experimental solubilities in the six systems studied to within an overall average absolute deviation of 3.4% and with a maximum deviation of 6.0%.     

Liquid chromatography of polymer mixtures by a combination of exclusion and full adsorption mechanisms. Three- and four-component polymer blends

Summary Coupling of full adsorption-desorption and size-exclusion chromatography (FAD-SEC) has been applied to the separation and molecular characterization of three- and four-component polymer blends. The method is based on the full adsorption of alln orn−1 components of the polymer blend in a specially designed FAD minicolumn. By appropriate eluent switching the adsorbed polymers are desorbed stepwise from the FAD minicolumn into an on-line SEC column for molecular characterization. It is shown that the desorption isotherms of particular blend components give valuable information about the appropriate displacer composition. The exact position of the desorption isotherms depends, however, both on the amount of polymer adsorbed and in the presence of other, chemically different, polymers within FAD column. The nature and composition of the displacer must, therfore, be adjusted if the intervals between the desorption of particular blend components are to be large enough to prevent displacement overlap. Presented at: Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 3–5, 1997.