NMR对MDI在稀溶液中水解反应机理的表征

采用核磁共振波谱(NMR)研究了二苯基甲烷二异氰酸酯(MDI)在稀溶液中的水解反应机理.将同一MDI样品分别溶解在氘代氯仿、氘代丙酮和加入少量水分的氘代二甲基亚砜溶剂(DMSO)中,进行核磁共振氢谱(1H NMR)、核磁共振碳谱(13C NMR)测试.结果显示,MDI在含水的DMSO溶剂中测得的谱图与氘代氯仿、氘代丙酮中的差别显著.对该溶液进行了13C-1H异核近程相关(HMQC)、13C-1H异核远程相关(HMBC)及碳原子级数(DEPT 135)测试,并利用经验公式对其进行了详细归属,确认了反应产物的结构.分析得知MDI在含水溶剂中迅速反应,异氰酸酯基转化为脲基和氨基基团.异氰酸酯与水反应生成氨基基团,其与异氰酸酯反应活性比水高,对位取代氨基与水的竞聚率比值为7.1,邻位为1.4,对位取代氨基活性约是邻位的5倍.     

四甲基苯二甲基二异氰酸酯基水性聚氨酯的合成和性能

采用四甲基苯二甲基二异氰酸酯、聚酯二元醇和二羟甲基丙酸为原料,合成了一系列具有不同异氰酸根与羟基摩尔比（n(-NCO)/n(-OH)）的聚氨酯乳液。 研究了n(-NCO)/n(-OH)对水性聚氨酯性能的影响。 结果表明,当该比值增加时,乳液的粒径增大,分布变宽,结晶性降低,耐热性下降,耐水性能呈现降低的趋势。 当异氰酸根与羟基摩尔比为3时,四甲基苯二甲基二异氰酸酯基水性聚氨酯的乳液粒径为10～30 nm,膜的分解温度达到275 ℃,24 h吸水率低于10%。     

Fast and convenient construction of carbamate/urea‐based dendrimers with a diisocyanate building block

A novel, fast, and simple synthetic procedure for polycarbamate/urea dendrimers, based on an AB–CD₂ coupling strategy, is presented. The reactivity difference of the two isocyanate functionalities of the AB building block allows the construction of these dendrimers without the necessity of activation or deprotection steps. This makes it possible to construct dendrimers within 2–3 days, even the largest dendrimers. The resulting dendrimers could be fully characterized by ¹³C NMR, IR spectroscopy, and mass spectrometry. The synthetic strategy necessitates only techniques such as stirring, heating, and accurate dosing, and there is no workup required for the purification of the compounds. On account of a wide variety of polyols, amines, and aminoalcohols, this new procedure is not limited to the synthetic strategy followed but allows the incorporation of a large variety of functional molecules in the core, in the branching units, or at the end groups. The method is even applicable when organometallic species are incorporated into the dendritic structure, thereby showing its versatility. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3112–3120, 2001     

Synthesis and characterization of poly(urethane-sulfone)s

Eight poly(urethane-sulfone)s were synthesized from two sulfone-containing diols, 1,3-bis(3-hydroxypropylsulfonyl)propane (Diol-333) and 1,4-bis(3-hydroxypropylsulfonyl)butane (Diol-343), and three diisocyanates, 1,6-hexamethylene diisocyanate (HMDI), 4,4′-diphenylmethane diisocyanate (MDI), and tolylene diisocyanate (TDI, 2,4- 80%; 2,6-20%). As a comparison, eight polyurethanes were also synthesized from two alkanediols, 1,9-nonanediol and 1,10-decanediol, and three diisocyanates. Diol-333 and Diol-343 were prepared by the addition of 1,3-propanedithiol or 1,4-butanedithiol to allyl alcohol and subsequent oxidation of the resulting sulfide-containing diols. The homopoly(urethanesulfone)s from HMDI and MDI are semicrystalline, and are soluble in m-cresol and hot DMF, DMAC, and DMSO. The copoly(urethane-sulfone)s from a 1/1 molar ratio mixture of Diol-333 and Diol-343 with HMDI or MDI have lower crystallinity and better solubility than the corresponding homopoly(urethane-sulfone)s. The poly(urethane-sulfone)s from TDI are amorphous, and are readily soluble in m-cresol, DMF, DMAC, and DMSO at room temperature. Differential scanning calorimetry data showed that poly(urethane-sulfone)s have higher glass transition temperatures and melting points than the corresponding polyurethanes without sulfone groups. The rise in glass transition temperature is 20–25°C while the rise in melting temperature is 46–71°C. © 1994 John Wiley & Sons, Inc.     

PU/MOMMT纳米复合材料的制备与研究

纳米复合材料由于其纳米尺寸效应，表面效应以及纳米粒子与基体界面间强的相互作用，具有优于相同组分常规复合材料的力学、热学等性能，引起了人们的广泛关注。用纳米材料改性聚合物，制备纳米复合材料是获得高性能高分子复合材料的重要方法。1998年以来，Pinnavaia等首先制备了聚氨酯，蒙脱土（PU／MMT）纳米复合材料，研究了有机蒙脱土在聚醚中的分散性。其后Chen等将聚羟基己内酯/蒙脱土（PCL／MMT）纳米复合材料加入到PCL和二苯基甲烷-4，4＇-二异氰酸酯（MDI）合成的预聚体与1，4-丁二醇扩链反应后的溶液中，制备了PU／MMT纳米复合材料。少量PCL／MMT的引入可使复合材料的综合性能大幅提高。     

Microwave-assisted acid hydrolysis of toluene diamine conjugates in urine samples for biomarkers in toluene diisocyanate analysis

Toluene diamines (TDAs) in urine have been used widely to determine the amount of toluene diisocyanate (TDI) absorbed by humans. Conventional hydrolysis to prepare a sample of urine takes approximately 16 h. An attempt is made to apply microwave-assisted heating (MAH) to reduce the duration of analysis. Urine collected from rats exposed to a mixture of 2,4- and 2,6-TDI was diluted with non-exposed human urine 1/1250-, 1/500- and 1/250-fold. The urine samples were hydrolyzed by both conventional heating and MAH. The hydrolysis efficiency obtained using MAH significantly exceeded that obtained using conventional heating. Hydrolysis by MAH required only 20 min, 48 times faster than with conventional heating. The use of the MAH method in hydrolysis was demonstrated to be reproducible, timesaving and efficient technique in measuring the concentration of urinary TDAs.     

多嵌段聚氨酯脲硬段模型化合物的合成和结构研究

多嵌段聚氨酯脲硬段模型化合物的合成和结构研究罗宁，王得宁，应圣康（华东理工大学材料科学研究所，上海，２００２３７）关键词３，５－二乙基甲苯二胺，４，４′－二苯基甲烷二异氰酸酯，氢键，微晶，热分析３，５－二乙基甲苯二胺（ＤＥＴＤＡ）是目前反应注射成型（...     

阴离子型聚氨酯水乳液的合成Ⅰ.2,2-二羟甲基丙酸与2,6-甲苯二异氰酸酯反应动力学研究

采用二正丁胺法及 FTIR法研究了合成阴离子型聚氨酯水乳液的核心反应 ,2 ,2 -二羟甲基丙酸与 2 ,6-甲苯二异氰酸酯的反应动力学 ,获得了相关的反应活化能数据 ,并提出了反应动力学模型。     

Fluoropolyethers end‐capped by polar functional groups. I. Kinetic approach to the reaction of hydroxy‐terminated fluoropolyethers with cycloalyphatic and aromatic diisocyanates

Urethane reactions of cycloaliphatic and aromatic diisocyanates with hydroxy‐terminated fluoropolyethers (FPEs) of various molecular weights and structure, at NCO : OH = 2, have been studied by monitoring, by IR analysis, the rate of decrease in NCO absorbance at 2264–2268 cm⁻¹. Different diisocyanates have been tested, among them the following: 4,4′‐dicyclohexylmethane diisocyanate (H₁₂MDI); 5‐isocyanato‐1,3,3‐trimethylcyclohexylmethyl isocyanate or isophorone diisocyanate (IPDI); 2,4‐toluene diisocyanate (TDI). Ethyl acetate (EA), methyl isobutyl ketone (MIBK), and hexafluoroxylene (HFX) have been used as solvents in presence of dibutyltin dilaurate (DBTDL) or 1,4‐diazabicyclo[2.2.2]octane (DABCO) as catalysts. These reactions gave rise to NCO‐end‐capped FPE–oligourethanes. Preliminary solubility tests for HO‐terminated FPEs in various solvents made it possible to select proper candidates for carrying out reaction in homogeneous conditions at high concentrations of reagents (30–50% w/w). The second‐order kinetic mechanism was shown to be valid. Positive deviations from linearity for the second‐order kinetics around 40–80% conversion, found for most of the FPE diols, were attributed to the autocatalysis of the isocyanate–hydroxyl reaction by the arising urethane groups. Uncatalyzed reactions with cycloaliphatic diisocyanates are very slow at 40°C. The tertiary amine DABCO is a much less effective catalyst than DBTDL. FPEs having terminal OH groups separated from the perfluorinated main molecular chain by  (OCH₂CH₂)_n segments (n = 1–2) are generally more reactive than FPEs with end  CH₂OH groups. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 557–570, 1999     

Synthesis and properties of aromatic secondary amine-blocked isocyanates

N-Methylaniline-, diphenylamine-, and N-phenylnaphthylamine-blocked toluene diisocyanates (TDI) were prepared and characterized by IR, NMR spectroscopy, and nitrogen content analyses. The structure–property relationship of these adducts was established by reacting with hydroxyl-terminated polybutadiene (HTPB). The cure rate of the adduct increases from the N-phenylnaphthylamine- to diphenylamine- and to N-methylaniline-blocked TDI adduct. Simultaneous TGA/DTA results also confirm this trend, and the thermal stability of the adduct decreases in the following order: N-phenylnaphthylamine–TDI > diphenylamine–TDI > N-methylaniline–TDI. The gas chromatogram of the amine-blocked isocyanate confirms that the thermolysis products are the blocking agent and isocyanate. The solubilities of the adducts were carried out in polyether, polyester, and hydrocarbon polyols, and it was found that the N-methylaniline–TDI adduct shows higher solubility than the rest and also found that the polyester polyol shows higher solvating power against the adducts than the polyether and hydrocarbon polyols. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1815–1821, 1999