Highly Selective Zeolite Topologies for Flue Gas Separation

The separation of carbon dioxide from flue gas is essential for the reduction of greenhouse gas emissions. In adsorptive methods, the challenge lies in the choice of suitable porous materials. Among all zeolite topologies, a number of adsorbents with pore dimensions in the range of the guest molecules were identified to allow an excellent separation by diffusion, and MRE and AFO zeolite topologies appear to be the best candidates based on equilibrium adsorption. Also, it was found that the behavior of this gas mixture in DFT and APD zeolites differed from the normal behavior.     

地球化学模拟在高放废物地质处置中的应用与发展

随着核能事业的发展,高放废物的处理和处置问题日益突出.其中,研究高放废物在环境介质中的吸附、扩散和迁移行为是获取放射性核素对周围环境和人群健康影响的基础参数的最重要和最直接的途径.近年来,人们利用已有的实验数据及核素的基础热力学和动力学数据,附以相应的数学模型,建立了一些地球化学模拟软件,用于分析核素在地质介质中可能发生的连续性和长期性变化.目前,国内外常用的地球化学模拟软件有十多种.本文从热力学平衡计算原理、种态分布计算方法和表面配位模型假设等几个方面对地球化学模拟软件进行了简要介绍,对近年来地球化学模拟软件在核素种态分布计算和表面配位模型模拟两方面的应用进行了举例分析,并以Ca-U-CO3配合物为例,说明完备的热力学数据对地球化学模拟软件发展的重要性,以期促进我国地球化学模型的应用和发展.     

Monoclinic β-Li2TiO3: Neutron diffraction study and estimation of Li diffusion pathways

A neutron powder diffraction study on lithium titanate Li₂TiO₃ was performed at low temperatures. The monoclinic β-phase has been found to be stable over the whole investigated range of temperatures (4 K–300 K). A smooth and nonlinear increase of the lattice parameters has been observed upon heating and correlated to the behavior of interatomic distances. Lithium diffusion pathways in Li₂TiO₃ were estimated theoretically on the basis of the obtained structural data using bond-valence modeling. Experimentally diffusion pathways were evaluated by analysis of the negative nuclear scattering densities at 1073 K, which were reconstructed using a maximum entropy method. Although the bond-valence mismatch map indicated a possible Li diffusion either in ab plane or along c direction, analysis of the experimental data revealed that Li migration is thermodynamically less feasible in latter case.     

Computational analysis of glycolytic reaction in open spatial reactor

We consider the computational analysis of processes within the spatially-distributed model simulating the glycolytic reaction taking place in the one-side fed open chemical reactor. The main point of the simulation is the decomposition of the reaction–diffusion system into unidirectional reaction in a bulk supplied by feedback terms stated as boundary conditions on the lower boundary of the reactor, i.e. the unique plane where an exchange with an outer medium is possible within the real experimental situation. Analysis of the curvature of the reagents distribution curves proves kinematic character of the observed lateral waves corresponding to the picture of experimentally observed glycolytic traveling waves. At the same time, their origin relates to diffusion of the reagents in a vertical cross-section of the reactor. Study of the solutions for the concerned reaction–diffusion model in the case of stochastically different diffusion coefficients reveals the Turing structures.     

Kinematics of layered reinforced-concrete planar beam finite elements with embedded transversal cracking

In this work crack formation and development is addressed and implemented in a planar layered reinforced-concrete beam element. The crack initiation and growth is described using the strength criterion in conjunction with exact kinematics of the interlayer connection. In this way a novel embedded-discontinuity beam finite element is derived in which the tensile stresses in concrete at the crack position reaching the tensile strength will trigger a crack to open. Since the element is multi-layered, in this way the crack is allowed to propagate through the depth of the beam. The cracked layer(s) will involve discontinuity in the cross-sectional rotation equal to the crack-profile angle, as well as a discontinuity in the position vector of the layer’s reference line. A bond–slip relationship is superimposed onto this model in a kinematically consistent manner with reinforcement being treated as an additional layer of zero thickness with its own material parameters and a constitutive law implemented in the multi-layered beam element.     

Application of the transmission line matrix method for outdoor sound propagation modelling – Part 1: Model presentation and evaluation

The present paper deals with an original time-domain approach applied to outdoor sound propagation under meteorological effects. The transmission line matrix method, based on the Huygens’ principle, had already been validated over impedant grounds and complex topography. The presented formulation proposes to take into account meteorological effects (wind speed and temperature) through the relative sound speed. The necessary wavefront direction is determined through the calculation of the averaged intensity vector direction. A good agreement is found between simulations of both the transmission line matrix and parabolic equation methods. A relevant use of the method is shown in the framework of environmental acoustics and initial applications are proposed in Part 2.     

Synthesis and Properties of Thermosensitive Poly(N-Isopropylacrylamide)/Waterborne Polyurethane Graded Concentration Hybrid Films

Temperature-sensitive hybrid films were synthesized with a concentration gradient by casting and UV curing of N-isopropylacrylamide (NIPAAm) monomers (0%–70%) on the free surface of waterborne polyurethane (WPU) films on a Teflon substrate. The surface hardness and contact angle of the free surface with a water drop increased asymptotically with the addition of NIPAAm, whereas those on the substrate side were virtually unchanged. The diffusion coefficient (D), rates of swelling at 20°C (below the lower critical solution temperature (LCST) of poly(N-isopropylacrylamide) (PNIPAM)) and deswelling at 50°C (above the LCST) increased with increasing NIPAM content, showing favorable thermosensitivity. In addition, the glassy state modulus and glass transition temperature (Tg) of the film increased with increasing NIPAM content, whereas the rubbery modulus decreased due to the increased molecular weight between the crosslinks. In addition, as the NIPAM content increased, the film showed a positive yield with an increased yield and fracture stress and decreased ductility. Above 50% NIPAM, the film became brittle, showing a linear stress–strain relationship.     

New application of human eye model in the verification of spot diagram with refractive diopter

In response to the rapid advancement of auto-refractor technology, most optometry shops provide refraction services. Despite their speed and convenience, the measurement values provided by auto-refractors include a significant degree of error due to psychological and physical factors. Therefore, there is a need for repetitive testing to obtain a smaller mean error value. However, even repetitive testing itself might not be sufficient to ensure accurate measurements. Therefore, research on a method of measurement that can complement auto-refractor measurements and provide confirmation of refraction results needs to be conducted. The customized optometry model described herein can satisfy the above requirements. From the existing optical technologies, using human eye measurement devices to obtain individual relevant optical feature parameters is no longer difficult. These parameters allow us to construct an optometry model for individual eyeballs. They also allow us to compute spot diagrams produced from the optometry model using the CODE V macro programming language before recognizing the geometrical spot diagram with the back-propagation neural network algorithm to obtain the accurate refractive diopter. Results show that the accuracy achieved was above 98% and that this application could significantly enhance the service quality of refraction.     

Hydrogen Spillover Enhanced Hydroxyl Formation and Catalytic Activity Toward CO Oxidation at the Metal/Oxide Interface

H₂‐promoted catalytic activity of oxide‐supported metal catalysts in low‐temperature CO oxidation is of great interest but its origin remains unknown. Employing an FeO(111)/Pt(111) inverse model catalyst, we herewith report direct experimental evidence for the spillover of H(a) adatoms on the Pt surface formed by H₂ dissociation to the Pt?FeO interface to form hydroxyl groups that facilely oxidize CO(a) on the neighboring Pt surface to produce CO₂. Hydroxyl groups and coadsorbed water play a crucial role in the occurrence of hydrogen spillover. These results unambiguously identify the occurrence of hydrogen spillover from the metal surface to the noble metal/metal oxide interface and the resultant enhanced catalytic activity of the metal/oxide interface in low‐temperature CO oxidation, which provides a molecular‐level understanding of both H₂‐promoted catalytic activity of metal/oxide ensembles in low‐temperature CO oxidation and hydrogen spillover.